You are not alone Phil 73 de Wolf, DK1FW Am 26.03.2023 um 11:11 schrieb Phil Cooper via groups.io:

Although I do not own an RF2K I have checked the available information some time ago. An english manual is available at https://rf-kit.de/files/User_Manual_RF2K-S_ENG_V14.pdf Section 5.2.6 provides in

Thanks Dave, as usual your judgement was dead on. There was no Z in the cfm Box - it was blank. So DXKeeper behaved as it should in not showing the QSO Zone as confirmed by LotW Actually the problem w

Dave, I generated a WAZ progress report today. Strangely the 12m WAZ CW report told me that I had Zone 23 worked (JT5DX) but not confirmed, That QSO is shown in my log as confirmed and DXCC-verified b

Thank you Joe, that solved it. 73 de Wolf, DK1FW Am 18.07.2022 um 15:17 schrieb Joe Subich, W4TV:

Dave, please accept my apologies if this has been brought up before. Some time ago CQ introduced the WAZ Digital awards (Band/multiband), which does not include RTTY. DXKeeper WAZ Realtime progress se

I was referring to the email I sent to AA6YQ(at)ambersoft.com Am 01.11.2021 um 18:06 schrieb Dave AA6YQ:

Dave, I have followed your recommendation by sending the more detailed test description and results to both yourself and Dick, W3OA. You could see that you were both addressees of my e-mail. Of course

Dave, unfortunately I did not identify, which version of Commander I was using when I reported the problem in interoperation of my FT5000 with CW Skimmer/Skimmer--to-Commander and Commander last year.

Dave, thank you for Commander 12.1.8. I have tested it briefly with Skimmer-to-Commander and the problem does not show with that combination. After commanding the FT5000 from SSB/RTTY/PSK-FT8 to CW an

About a year ago I reported a problem between Commander and Skimmer-to-Commander (by W3OA) in controlling my FT5000. (msg# 196929). After switching to CW from another mode both VFO-A and -B are in CW

Thanks for the explanation Dave. I was not aware of the comlications to add RTTY. I will sit back patiently. 73 de Wolf, DK1FW Am 12.10.2021 um 14:42 schrieb Dave AA6YQ:

Dave, DXKeeper and DXView allow to set/view a user-specified digital mode family to support personal objectives beyond DIGITAL progress for DXCC. While the list, from which this can be chosen, include

Thanks Dave, I will first try to invoke my command sequences in a different way. If that does not solve it i will check with Dick. 73 de Wolf Am 23.10.2020 um 20:22 schrieb Dave AA6YQ:

Dave, I did as you suggested and recorded the Commander Message flow in a step-by-step scenario. 1. Step: only Commander, CW Skimmer to Commander and CW Skimmer are started Commander's initial command

Definitely! After executing the macro/command sequence I can verify on the Ft5000 display that VFO-B is in CW mode. Ging to bead now. Am 22.10.2020 um 23:07 schrieb Dave AA6YQ:

The FT-5000 CAT command 'AB; which I use in the command sequence, copies all VFO-A settings to VFO-B Am 22.10.2020 um 21:00 schrieb Dave AA6YQ:

Dave, All my Startup Macros invole Commander user-defined sequences. The CW Startup-Macro invokes a sequence in, which all settings for VFO-A are copied to VFO-B. So after I switch from FT8 to CW in W

Dave, For pile-up situations I have been using CW-Skimmer together W3OA's CW-Skimmer-to-Commander. For years this combination has worked flawlessly. Since adding WSJT support to my DXLab configuration

Thanks Ian, that SQL expression did the job. 73 de Wolf Am 15.10.2020 um 17:35 schrieb iain macdonnell - N6ML: