I see the interpretation, but I think he's asking how to filter his log to only dxcc qsos then export 1 adif file... But I could be wrong.

Thanks! Just saw the release note on that version.

I have dxview 4.7.9 and would like to get the version that adds the 2nd method of yaesu reporting, please. I've just installed a new yaesu controller and seem to have the same heading not showing issu

Wsjt file menu "open log directory" will get you to the files. Wsjt log is there in adif format. If you are only missing a few ft8, I think you can enable dupe checking in dxkeeper and just import. On

Yes. I've done that too. Thought about asking for a feature to protect or lock workspaces. Was not sure if I was in a the small group who messed up.....

you may have already taken note, but I did want to mention 1 important detail that can be missed here. the brake relay is switching mains 120v... the CW and CCW are 24 volt switching, but not the brak

for more plug and play, I'd suggest the Hy Gain DCU-3... https://mfjenterprises.com/products/dcu-3#description

I know, right?

I suspect you are correct... But it was a great discussion!

Unsure if the original poster Steven KN0L is still following... (If so, can you tell us what direction you are thinking? The hygain dcu3 would be plug and play I suspect but pricy. The diy method is c

Wow. That's more than I figured. And yes, the hd73 has no brake. I think The original poster indicated he has the control box. I'd use that transformer and cap, or do the mods I had described. But my

I see the logic to just use a cap and transformer and remove the controller box entirely. You could use the cap and transformer in the existing box..... But the rework is not tough. I'd short 4 to 7 t

Well, That was the path I took for the hd73 as I had nothing but the rotator. I used a 75va controls transformer https://www.amazon.com/gp/product/B013FV06PE with a motor start cap from ace hardware h

Not sure I'd agree with that. I'd need to find the schematic, but I'd think the switches are configured as: Left a bit, brake engage, left more, rotated slight release, stop rotate, hold bake Center o

Your ham m will be similar. The arduino relay contacts will be in parallel with the switches in the controller box. https://www.egloff.eu/index.php/en/la-technique/arduino/k3ng-rotator-for-hamiv

I'm doing this to interface ham iv with analog controller box. A voltage divider to adjust the meter voltage to 0-5v will be required. Gonna use solid state relay for brake And 2 channel relay board f

I built the k2ng arduino interface. https://blog.radioartisan.com/yaesu-rotator-computer-serial-interface/ I used it with hd73 rotor unit and added my own 75va controls transformer and a motor start c

Doesn't the installer copy the new .exe to dxlablauncher.exe so the shortcut never needs to change? Check and see if you have a file called C:\DXLab\Launcher\DXLabLauncher.exe That exactly matches siz

Wow. Great troubleshooting!

Well crap. I thought i still had to "run as administrator "