Choose Icom 7300 in Commander and set the comm port to the port installed by the Icom drivers . Make sure the radio address is 94H in Commander (the default for a 7300). In Winwarbler make sure you se

In Commander , click on Config and then on the window that opens click on the GENERAL tab. Look to the lower left and check the little box "Show within main window: under USER DEFINED Controls. Then i

They were the same visually, I triple check. I wondered if somehow they were listed as the same, what was listed was not actually the case. Andy.

Still baffles me but I did a reset of the radio and the problem went away. Dang these modern rigs. Why some worked and not others.

Can anyone thing of a reason Winwarbler's (and Multipsk's ) waterfall shows ZERO signals using PSK or RTTY whereas other digital mode applications using the exact same audio codec do show signals in t

Inquiring minds want to know.. When Commander magically displays signals over an entire band using an Icom 7300, how is Commander accessing these signals ? I'm intrigued because owners of 7300's point

CMD: 1A* Sub : 05 Data = 0266 00 or 01 Recorder Set > REC Mode (00=TX&RX, 01=RX Only) 0267 00 or 01 Recorder Set > TX REC Audio (00=Direct, 01=Monitor) 0268 00 or 01 Recorder Set > RX REC Condition (0

Since Commander and DXkeeper seamlessly interacts with Multipsk, DX Lab users might be interested in knowing that the Multipsk Yahoo group has moved to https://groups.io/g/multipsk Normally the move h

If you use the third party app, JT Alerts, it will automatically log each QSO (in real time) to DX Keeper. Andy K3UK

Any Icom user care to share their setting for using Commander and Winwarbler to key and generate CW ? I have digital modes working well , and have previously set up CW and DXlab with Kenwoods and Flex

I think I solved the issue within Commander. I had Interrogation ON , an Icom requires it off.

Commander's Spectrum-Waterfall Display usually stops altogether if I click on the waterfall to tune in a station, usually after 3 or 4 clicks in close succession. I doubt it is my PC since I often mul

I do the same.. use the WW text boxes or sometimes type in to DX Keeper comments box. Andy K3UK

Just about to add a Icom to the mostly Flex shack. Thanks Dave for already having a nice set of instructions. https://www.dxlabsuite.com/commander/Help/ControllingMultipleRadios.htm Andy K3UK

There is also a "waterfall gain" within WW's config tabs, both in the RTTY tab and the PSK tab. I have mine st at five. To get a color waterfall make sure "synthetic" is on. Andy K3UK

Winwarbler works well with my 6300. Did you check your RX levels in DAX ? Andy K3UK

Nice!

The Flex and RSP ideas will be welcome too. In the screenshot there are callsigns. Are the call signs plotted via Spotcollector and a distant cluster ? Andy K3UK

Thanks for the Clublog summary, and the note that it is simpler to continue to use DXkeeper for LotW than do a sync at Clublog. Andy K3UK

I'm trying to help a ham that is new to both DXkeeper and LoTW. What is the message below telling him ? I assume REVOKED is much different from expired. Maybe he requested a new certificate but has no