Dave, I believe CST is UTC –6 and CDT is UTC –5...... but whatever the case, my computer clock is showing the correct local time but two station clocks set to UTC WERE NOT. I have a HeathKit clock in

The SR & SS times shown in DXView for EN50nj ,( 43, 20, 0 N and 88, 52, 0 W) for today 10-24-14, were 12:14 and 23:03 or one hour earlier than the actual times. I was outside this morning at 12:15 UTC

K9USA no longer has telenet access according to sysop Steve, K9AN 73 & DX, Gary - AB9M

SigFor the Centennial W1AW/ portable, I would answer YES to LoTW correction to a grid conflict. I know when we did the W1AW portable nine IL, we had a lot of operators over a wide area on different mo

SigThe ARRL has a requirement for those participating as W1AW/ stations to name their ADIF log files in a format which includes the grid square, thus the the LoTW grid square is correct. When working

Unless you are running tablets or touch screen applications, I’d wait for 10. I have been using Microsoft operating systems for home and work for over thirty years and have Win7 on three computers and

Just ask for help when you don’t understand the how or why. You will get support within 24 hours! This group has been the most helpful bunch of individuals I have met. Please do not uninstall and rein

Dave, This is neither a complaint nor a suggestion, but rather a THANK-YOU for all the contributions to DXing you have made with DXLab Suite AND this Yahoo Group. You’ve helped me and a number of peop

I have just been offered an opportunity to serve as the local ARC “QSL” manager; can I add the two callsigns belonging to the local ARC and manage them via my current DXLab installation on my computer

Mike, I had forgotten that DDUtil “knows” if PowerSDR is running. I suspect that is just a CAT data stream with both a PowerSDR version and a hardware ID octet or data bits, but lets get back to your

I found http://pe0fko.nl/ExtIO_Si570/ which appears to have the ExtIO.dll file and configuration tool for HDSDR. 73 & DX, Gary - AB9M

Mike, I do not know if DDUtil is PowerSDR specific. Since I have a FLEX-1500 and use PowerSDR, I have not had the problems you have run into. Still DDUtil is a free utility, I would try running it wit

Mike, if I understand the manual, you need a pair of virtual ports (i.e. com 5 and 15) between DDutil and HDSDR, a pair a pair of virtual ports (i.e. com 6 and 16) between Commander and DDUtil, and fi

Mike, in reading the manual I now understand HDSDR is working via OMNI Rig so the section you will need to refer to is Use HDSDR with an Ensemble RX to control a transceiver. That given, my approach w

Mike, With your ProIII running and PORT 7 as your primary CAT serial port, Secondary CAT serial port is set to “follow primary”, com 10 is enabled; entering and enabling com 10 on the HDSDR CAT panel

Mike, if I compare my configuration to yours (not sure that’s the case, but I hope so) then it seems COM 10 and and the HDSDR CAT control are the issue. In PowerSDR, when you set the CAT control seria

Mike, do you have a radio controlled by Commander on the primary CAT port? Do you have a Serial port active for the primary CAT port? What are your Virtual Serial port pairs and which VSP software are

Thanks Joe. Since I’m using a FLEX-1500 and PowerSDR and have no experience with HDSDR, I’m having to research how its CAT interface is set up, but it seems its working like the same as PSDR. I run di

Mike, is HDSDR controlling the Softrock? Can you hear and see WWV for example? (I kind of need to know before I can go to the next step) 73 & DX, Gary - AB9M

Lead or follow refer to the primary CAT serial port or secondary CAT serial port. In my illustration I have a traditional radio (OMNI-VII) on the primary CAT serial port and an SDR (Flex-1500) on the