Date   

Re: Marathon stats

Art K6XT <k6xt@...>
 

Got it thanks Dave.

73 Art
Allison, Colorado
A glass is good, and a lass is good,
And a pipe to smoke in cold weather;
The world is good, and the people are good,
And we ’re all good fellows together.
John O’Keefe
Happy New Year!

On 2011-01-16 12:20, Dave AA6YQ wrote:
AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
Art K6XT
Sent: Sunday, January 16, 2011 11:56 AM
To: DXLab
Subject: [dxlab] Marathon stats


Would it be feasible to put a little tally text line in DXKeeper's RAT
Marathon Award Progress Filter panel, that shows the latest totals according
to the band and mode selectors?

At the top of the "Realtime Award Tracking" window's Marathon tab, you
should see

"2011 Marathon Award Progress: X CQ Countries and Zones"

If you uncheck the "Marathon Award Progress Filter" panel's "Unworked"
box and check the "Worked" box, then X will be your current total, subject
to the Band or Mode selector.

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links




SpotCollector 5.5.5

n4lv <n4lv@...>
 

Hi all,
Did the upgrade this AM and love the the Marathon features! One tiny thing - I cannot find the "spot needed" column as referenced in the upgrade notes?

73,

Glenn N4LV


Re: the AA6YQ-FIR-512 Profile

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
Bill, W6WRT
Sent: Sunday, January 16, 2011 1:13 PM
To: dxlab@yahoogroups.com
Subject: Re: [dxlab] the AA6YQ-FIR-512 Profile


I used the new FIR512 profile during the UK RTTY contest this weekend
and found it worked very well, with one possible exception.

When two or more stations were calling at the same time on the same
frequency it seemed to have a very hard time decoding anything. I
observed this several times. I realize this is a difficult scenario for
any profile, but this one seemed to have more trouble than usual.

This is not any kind of scientific observation of course, just an
impression from only one contest. Did anyone else notice this?

This profile is designed to improve the decoding of a single weak RTTY
signal. It is not designed for use in congested conditions where more than
one signal is present.

73,

Dave, AA6YQ


Re: Cannot upload to LOTW

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: wd8jja7760@hotmail.com [mailto:wd8jja7760@hotmail.com]On Behalf Of
RDavis (WD8JJA)
Sent: Sunday, January 16, 2011 11:57 AM
To: Dave AA6YQ; dxlab@yahoogroups.com
Subject: Cannot upload to LOTW


Dave,
I suddenly started having a problem uploading my log to LOTW.
After populating the queue, and clicking "Upload to LOTW", the box appears
"waiting for TQSL to complete processing" with an option to abort.
It is at this time I normally see a box asking for my password.

I have a sneaky suspicion it is merely off the screen, but I can't find it
to move it back on.
It doesn't show up with alt-tab or in the task manager applications.

I've attached my error log in case there is something in there that is
useful.

The errorlog shows DXKeeper successfully starting TQSL.exe, with no signs
of trouble.

If you think the Password window is off-screen, try the techniques
described here:

<http://www.dxlabsuite.com/dxlabwiki/RecoverWindow>

To eliminate the Password prompt whenever you upload to LotW, use this
procedure:

<http://www.dxlabsuite.com/dxlabwiki/LotWRemovePassword>

73,

Dave, AA6YQ


Re: moving to a new desktop

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
WW3S
Sent: Sunday, January 16, 2011 2:12 PM
To: dxlab@yahoogroups.com
Subject: Re: [dxlab] moving to a new desktop


Thanks Rich, how about the LOTW cert files? Do I simply copy them, or is
there something else involved?

On 1/16/2011 10:59:50 AM, Rich - W3ZJ (rich@w3zj.com) wrote:
Detailed step by step instructions for moving DXLab from one PC to
another are provided at:

http://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs

Instructions for moving LoTW to another PC are provided at:

http://www.dxlabsuite.com/dxlabwiki/LotWMoveToAnotherPC
Steps 2, 3, and 4 of these instructions will move your certificates.
73,

Dave, AA6YQ


Re: Marathon stats

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
Art K6XT
Sent: Sunday, January 16, 2011 11:56 AM
To: DXLab
Subject: [dxlab] Marathon stats


Would it be feasible to put a little tally text line in DXKeeper's RAT
Marathon Award Progress Filter panel, that shows the latest totals according
to the band and mode selectors?

At the top of the "Realtime Award Tracking" window's Marathon tab, you
should see

"2011 Marathon Award Progress: X CQ Countries and Zones"

If you uncheck the "Marathon Award Progress Filter" panel's "Unworked"
box and check the "Worked" box, then X will be your current total, subject
to the Band or Mode selector.

73,

Dave, AA6YQ


Re: Connect and disconnect Cluster

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
koro19672002
Sent: Sunday, January 16, 2011 11:49 AM
To: dxlab@yahoogroups.com
Subject: [dxlab] Connect and disconnect Cluster


Dave,

The Sysop of ON0DXK mailed me today and told me i am connecting and
disconecting the cluster every 5 minutes and it give a lot of useless
traffic.

The led on the Spot source status shows yellow.

I have no idea whats wrong.

If the button is yellow, then SpotCollector is not successfully logging
in to the cluster. On the Configuration window's "Spot Sources" tab, be sure
your username is set to your callsign.

73,

Dave, AA6YQ


Re: Feature Requests

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
iz4mjp
Sent: Sunday, January 16, 2011 10:16 AM
To: dxlab@yahoogroups.com
Subject: [dxlab] Feature Requests


After about 40 hours of intensive use of theDX Lab Suite, i would like to
propose to the Group some feature requests.

1) The possibility to open/close each of the Auxiliary Areas (Auxiliary,
QSL, OnLine QSL, Awards, ecc ecc) using a Fnn key or a combination
keystroke. As not all of us can use 2 monitors i think it would be a nice
feature.

2) Working on my log, i feel the need of a "Note field" on the main QSO Area
(a field place under the field "Power" "Code" "DXCC" "Entity". The "Comment"
field presents in the Details Area is not immediately reachable. IMHO.

Regarding your first two suggestions, it sounds like you are using the
Main window's "Log QSOs" tab for logging QSOs in real time. Have you instead
tried logging using the Capture window? This provides all of the primary
items except those needed for logging a satellite QSO.


3) I feel the need to mark a "QSL Sent Via" with a new Letter "O". This in
order to mark those QSL requested via OQRS. Nowadays the OnLine QSL Request
System is being increasingly used. It would be importanto for me to identify
QSLs requested using OQRS.

ADIF does not define 'O' as a legal value for "QSL Sent Via"; I suggest
that you use 'E' for this purpose.


4) I'd like to see the "Call" field in the QSL Main Area with a bold font
and with a Dark Blue color in order to immediatly indentify this primary
info during Edit operation or QSO insert.

5) In the QSO Main Area i've noted that some fields are too wide. On the
oter hand some are too small.
I suggest to shorten these fields:

QTH
TX Freq
RX Freq,
Entity
Begin
End

and to enlarge:
Name

I realize that enlarging the fields "Via", "Tx Band" and "DXCC" has not
sense but i find the "Name" field too small.

Everyone has different preferences for the widths and positions of the
text boxes and selectors. If I change them to satisfy one request, there'll
be a deluge of new requests, many of them conflicting. Making it so that
users can re-arrange the boxes and selectors with whatever widths and
positions they like is technically feasible, but would consume significant
development time at the expense of new capabilities of higher priority, and
make DXKeeper more difficult to learn, document, test, and support. Thus I
do not expect any change in this area.

73,

Dave, AA6YQ


Re: moving to a new desktop

Jamie WW3S
 

Thanks Rich, how about the LOTW cert files? Do I simply copy them, or is there something else involved?

On 1/16/2011 10:59:50 AM, Rich - W3ZJ (rich@w3zj.com) wrote:
Detailed step by step instructions for moving DXLab from one PC to
another are provided at:

http://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs

Instructions for moving LoTW to another PC are provided at:

http://www.dxlabsuite.com/dxlabwiki/LotWMoveToAnotherPC

73, Rich - W3ZJ



WW3S wrote:
I'm moving to a new desktop running Win7, I have all the new applications
installed, and copied my log and the log page display config file
over....I'd
like to move my DXCC and LOTW stuff over next, what do I need to
move over so my DXCC records are the same as on the old PC, and what do
I
need to move so the automagic LOWT upload/sync works?




------------------------------------

Yahoo! Groups Links






------------------------------------

Yahoo! Groups Links


Re: Support request

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
iz4mjp
Sent: Sunday, January 16, 2011 9:54 AM
To: dxlab@yahoogroups.com
Subject: [dxlab] Support request


Hello,
yesterday i finally migrate from SwissLog to DX Lab.
I've imported in a brand new Log (MDB file) my 7600 QSOs.

All seems to run fine (many thanks Dave for the SwissLog import filter).

Now i'd like to know if i have to run the Fix PJ script (in my Log i have
all the new entities worked after 10.10.10 plus the deleted ones). What have
i to do? Have i to run the Fix PJ script or not?

If your QSOs made with the new PJ entities after 2010-10-10 specify the
correct country code (numbers in the 517-520 range), there is no need to run
the FIX_PJ script.


Sql Expression.
As i not have skills with SQL expression, some one could suggest me how
create a Filter (ADV Tab -> SQL Quesry Filters 1-4) in order to filter the
Log Page Display using the "APP_ DXKeeper_QSO_Number" field?
As i have to edit a lot of QSOs i'd like to use this unique reference to
speed up the work.
Could someone let me know what expression i have to put in the field?

The SQL expression
APP_DXKeeper_QSO_Number=1

will display the QSO whose QSO# is 1
The SQL expression
APP_DXKeeper_QSO_Number=<filtertextbox>

will display the QSO whose QSO# is specified in the Filter panel's text
box. If you're going to be frequently filtering by QSO#, place this filter
expression in one of the first "bank" of SQL Query Filters on the "Advanced
Sorts, Filters, and Modifiers' window, and set the Caption to "QSO #". Then
by clicking the Filter panel's ~ button, you'll get a QSO# button in the
Filter panel with which you can quickly filter for the QSO# specified in the
Filter panel text box.

73,

Dave, AA6YQ



Many thanks

Franco, IZ4MJP






------------------------------------

Yahoo! Groups Links



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3384 - Release Date: 01/16/11


Re: DXKeeper 9.2.5 error 91

Dave AA6YQ
 

Thanks, John. Another user has reported this and sent me an errorlog and log
file to investigate.

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
John Huffman
Sent: Sunday, January 16, 2011 7:49 AM
To: dxlab@yahoogroups.com
Subject: [dxlab] DXKeeper 9.2.5 error 91


Dave -

Updated to DXK 9.2.5 and set up CQ Marathon. DXKeeper is not happy. I
get this a lot:
program error 91 in module DXLogModule.UpdateProgressDisplays: Object
variable or With block variable not set

Here's part of my errorlog.txt with the latest startup.

73 de K1ESE
John

16-Jan-2011 12:45:26 > DXKeeper version 9.2.5
16-Jan-2011 12:45:26 > App.Path : C:&#92;DXLab&#92;DXKeeper
16-Jan-2011 12:45:26 > App.exe : DXKeeper
16-Jan-2011 12:45:26 > Operating System: Windows XP (32-bit) build 2600
16-Jan-2011 12:45:26 > Locale ID : 1033 (0x409)
16-Jan-2011 12:45:26 > ANSI CodePage : 1252
16-Jan-2011 12:45:26 > OEM CodePage : 437
16-Jan-2011 12:45:26 > Country : United States
16-Jan-2011 12:45:26 > Language : English
16-Jan-2011 12:45:26 > DXLab Apps : [CC,PF,SC]
16-Jan-2011 12:45:45 > program error 91 in module
DXLogModule.UpdateProgressDisplays: Object variable or With block
variable not set



------------------------------------

Yahoo! Groups Links



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3382 - Release Date: 01/15/11


Re: DxKeeper and EDIT button

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
it9fga
Sent: Sunday, January 16, 2011 6:20 AM
To: dxlab@yahoogroups.com
Subject: [dxlab] DxKeeper and EDIT button


Hi to all,

why not enable EDIT button for all DxKeeper qso's in order to modify and
save corrections ?

Check the "Require Edit to modify logged QSOs" box in the "Main Log QSOs
options" panel on the Configuration window's General tab.

73,

Dave, AA6YQ


Re: the AA6YQ-FIR-512 Profile

Bill, W6WRT <dezrat1242@...>
 

I used the new FIR512 profile during the UK RTTY contest this weekend
and found it worked very well, with one possible exception.

When two or more stations were calling at the same time on the same
frequency it seemed to have a very hard time decoding anything. I
observed this several times. I realize this is a difficult scenario for
any profile, but this one seemed to have more trouble than usual.

This is not any kind of scientific observation of course, just an
impression from only one contest. Did anyone else notice this?

73, Bill W6WRT


Re: the AA6YQ-FIR-512 Profile

Art K6XT <k6xt@...>
 

Dave
New profile looks like a winner. Testing......testing......

73 Art
Allison, Colorado
A glass is good, and a lass is good,
And a pipe to smoke in cold weather;
The world is good, and the people are good,
And we ’re all good fellows together.
John O’Keefe
Happy New Year!

On 2011-01-14 21:54, Dave AA6YQ wrote:
I missed a step for WinWarbler users:

1. replace the USERPARA.INI file in your WinWarbler folder with the
USERPARA.INI file in WinWarbler's Profiles folder

2. restart WinWarbler

3. in the Main window's "RTTY Receive" panel, set the Profile selector to
AA6YQ-FIR-512

73,

Dave, AA6YQ


-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of
Dave AA6YQ
Sent: Friday, January 14, 2011 11:50 PM
To: dxlab@yahoogroups.com
Subject: [dxlab] the AA6YQ-FIR-512 Profile


A recent post by Don AA5AU has generated interest in the use of the above
MMTTY Profile. For ops using WinWarbler, gaining access to this profile is
straightforward:

1. replace the USERPARA.INI file in your WinWarbler folder with the
USERPARA.INI file in WinWarbler's Profiles folder

2. restart WinWarbler

For ops using standalone MMTTY, the steps required to gain access to the
AA6YQ-FIR-512 Profile are now documented in

<http://www.dxlabsuite.com/dxlabwiki/AA6YQ-FIR-512>

If you'd like to understand more about optimizing the MMTTY engine and the
role Profiles play, see

<http://www.dxlabsuite.com/winwarbler/Help/SoundcardRTTYSettings.htm#MMTTY%2
0Engine%20Configuration>

or navigate to the "MMTTY Engine Configuration" topic in the "RTTY Settings"
section of<http://dxlab.ky1v.com/WinWarbler/WinWarbler.pdf>

or click one of the Help buttons in WinWarbler and navigate to the "MMTTY
Engine Configuration" topic in the "WinWarbler RTTY Settings" section.

73,

Dave, AA6YQ






------------------------------------

Yahoo! Groups Links



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3379 - Release Date: 01/14/11



------------------------------------

Yahoo! Groups Links




Cannot upload to LOTW

RDavis (WD8JJA) <wd8jja@...>
 

Dave,
I suddenly started having a problem uploading my log to LOTW.
After populating the queue, and clicking "Upload to LOTW", the box appears "waiting for TQSL to complete processing" with an option to abort.
It is at this time I normally see a box asking for my password.

I have a sneaky suspicion it is merely off the screen, but I can't find it to move it back on.
It doesn't show up with alt-tab or in the task manager applications.

I've attached my error log in case there is something in there that is useful.

Rick, WD8JJA.
----------


26-Feb-2009 01:42:02 > DXKeeper version 7.5.4
26-Feb-2009 01:42:02 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
26-Feb-2009 01:42:02 > App.exe : DXKeeper
26-Feb-2009 01:42:02 > Operating System: Windows XP build 2600
26-Feb-2009 01:42:02 > Country : United States
26-Feb-2009 01:42:02 > Language : English (United States)
26-Feb-2009 01:42:02 > DXLab Apps : [CC,PF,DXV,SC]
26-Feb-2009 01:49:28 > Program Error in LotW.SendLotW, err.number = 53, err.description = File not found
26-Feb-2009 03:00:32 > DXKeeper shutdown

29-Mar-2009 15:34:58 > DXKeeper version 7.6.2
29-Mar-2009 15:34:58 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
29-Mar-2009 15:34:58 > App.exe : DXKeeper
29-Mar-2009 15:34:58 > Operating System: Windows XP build 2600
29-Mar-2009 15:34:58 > Country : United States
29-Mar-2009 15:34:58 > Language : English (United States)
29-Mar-2009 15:34:58 > DXLab Apps : [CC,PF,DXV,SC,PV,WW]
30-Mar-2009 01:29:05 > program error 3077 in module DXQSLModule.GenerateNeededQSLs, state = 11, CurrentQSLMode = 0: Syntax error (missing operator) in expression.
30-Mar-2009 01:29:05 > theCriteria = (QSL_Via = 'NO BURO, OR EQSL'S PLEASE. $ OR 2 IRC'S ONLY FOR QSLING') OR (QSL_Via LIKE '*/NO BURO, OR EQSL'S PLEASE. $ OR 2 IRC'S ONLY FOR QSLING') OR (QSL_Via LIKE 'NO BURO, OR EQSL'S PLEASE. $ OR 2 IRC'S ONLY FOR QSLING/*')
30-Mar-2009 02:10:07 > DXKeeper shutdown

24-Jul-2009 13:33:04 > DXKeeper version 8.0.5
24-Jul-2009 13:33:04 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
24-Jul-2009 13:33:04 > App.exe : DXKeeper
24-Jul-2009 13:33:04 > Operating System: Windows XP build 2600
24-Jul-2009 13:33:04 > Country : United States
24-Jul-2009 13:33:04 > Language : English (United States)
24-Jul-2009 13:33:04 > DXLab Apps : [CC,PF,DXV,SC,WW]
24-Jul-2009 17:26:12 > program error 3077 in module DXQSLModule.GenerateNeededQSLVariants: Syntax error (missing operator) in expression.
24-Jul-2009 17:26:58 > program error 3077 in module DXQSLModule.GenerateNeededQSLVariants: Syntax error (missing operator) in expression.
24-Jul-2009 17:38:27 > program error 3077 in module DXQSLModule.GenerateNeededQSLVariants: Syntax error (missing operator) in expression.
24-Jul-2009 17:39:54 > program error 3077 in module DXQSLModule.GenerateNeededQSLVariants: Syntax error (missing operator) in expression.
25-Jul-2009 03:34:30 > DXKeeper shutdown

22-Dec-2009 23:39:59 > DXKeeper version 8.3.9
22-Dec-2009 23:39:59 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
22-Dec-2009 23:39:59 > App.exe : DXKeeper
22-Dec-2009 23:39:59 > Operating System: Windows XP (32-bit) build 2600
22-Dec-2009 23:39:59 > Locale ID : 1033 (0x409)
22-Dec-2009 23:39:59 > ANSI CodePage : 1252
22-Dec-2009 23:39:59 > OEM CodePage : 437
22-Dec-2009 23:39:59 > Country : United States
22-Dec-2009 23:39:59 > Language : English
22-Dec-2009 23:39:59 > DXLab Apps : [CC,PF,DXV,SC,WW]
23-Dec-2009 01:28:10 > program error 3021 in module DXLogMain.UpdateAddressEditor: No current record.
23-Dec-2009 01:28:15 > program error 3021 in module DXLogMain.UpdateAddressEditor: No current record.
23-Dec-2009 01:28:21 > program error 3021 in module DXLogMain.UpdateAddressEditor: No current record.
23-Dec-2009 01:28:22 > program error 3021 in module DXLogMain.UpdateAddressEditor: No current record.
23-Dec-2009 04:13:44 > DXKeeper shutdown

20-Mar-2010 13:50:28 > DXKeeper version 8.5.4
20-Mar-2010 13:50:28 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
20-Mar-2010 13:50:28 > App.exe : DXKeeper
20-Mar-2010 13:50:28 > Operating System: Windows XP (32-bit) build 2600
20-Mar-2010 13:50:28 > Locale ID : 1033 (0x409)
20-Mar-2010 13:50:28 > ANSI CodePage : 1252
20-Mar-2010 13:50:28 > OEM CodePage : 437
20-Mar-2010 13:50:28 > Country : United States
20-Mar-2010 13:50:28 > Language : English
20-Mar-2010 13:50:28 > DXLab Apps : [CC,PF,DXV,SC]
20-Mar-2010 21:21:56 > program error 3021 in module DXLogModule.FilterDisplay: No current record.
20-Mar-2010 21:21:56 > FilterDisplayState 8
20-Mar-2010 21:21:56 > Filter =
20-Mar-2010 21:21:56 > FilterCaption = Filter: None
20-Mar-2010 21:21:56 > Criteria = (Call = '') and (QSO_Begin = #2010-03-20 21:21:56#)
20-Mar-2010 21:21:56 > Fieldbox(Callfield) =
20-Mar-2010 21:21:56 > Fieldbox(QSO_BeginField) = 3/20/2010 21:21:56
20-Mar-2010 21:21:56 > program error 3021 in module Capture.LogCmd_Click debug state = 1: No current record.
20-Mar-2010 21:21:56 > DXLogModule.LogFieldBoxes
20-Mar-2010 21:21:56 > Band(0) =
20-Mar-2010 21:21:56 > Call(0) =
20-Mar-2010 21:21:56 > DXCCPrefix(0) =
20-Mar-2010 21:21:56 > DXCCID(0) =
20-Mar-2010 21:21:56 > Freq(0) =
20-Mar-2010 21:21:56 > *** invalid real number
20-Mar-2010 21:21:56 > Mode(0) =
20-Mar-2010 21:21:56 > Name(0) =
20-Mar-2010 21:21:56 > Operator(0) =
20-Mar-2010 21:21:56 > QSL_Rcvd(0) =
20-Mar-2010 21:21:56 > QSL_Sent(0) =
20-Mar-2010 21:21:56 > QSL_Via(0) =
20-Mar-2010 21:21:56 > Comment(0) =
20-Mar-2010 21:21:56 > QTH(0) =
20-Mar-2010 21:21:56 > RST_Rcvd(0) =
20-Mar-2010 21:21:56 > RST_Sent(0) =
20-Mar-2010 21:21:56 > State(0) =
20-Mar-2010 21:21:56 > QSLSDATE(10) = 4000-01-01
20-Mar-2010 21:21:56 > QSLRDATE(10) = 4000-01-01
20-Mar-2010 21:21:56 > TX_Power(0) =
20-Mar-2010 21:21:56 > *** invalid long integer
20-Mar-2010 21:21:56 > QSO_Begin(18) = 3/20/2010 21:21:56
20-Mar-2010 21:21:56 > QSO_End(0) =
20-Mar-2010 21:21:56 > *** missing date
20-Mar-2010 21:21:56 > QSLMsg(0) =
20-Mar-2010 21:21:56 > CONT(0) =
20-Mar-2010 21:21:56 > ITUZ(0) =
20-Mar-2010 21:21:56 > CQZ(0) =
20-Mar-2010 21:21:56 > IOTA(0) =
20-Mar-2010 21:21:56 > CNTY(0) =
20-Mar-2010 21:21:56 > CONTEST_ID(0) =
20-Mar-2010 21:21:56 > GRIDSQUARE(0) =
20-Mar-2010 21:21:56 > SRX(0) =
20-Mar-2010 21:21:56 > STX(0) =
20-Mar-2010 21:21:56 > PROVINCE(0) =
20-Mar-2010 21:21:56 > BROKEN(0) =
20-Mar-2010 21:21:56 > MYQTHID(0) =
20-Mar-2010 21:21:57 > ADDRESS(0) =
20-Mar-2010 21:21:57 > SAT_NAME(0) =
20-Mar-2010 21:21:57 > SAT_MODE(0) =
20-Mar-2010 21:21:57 > PFX(0) =
20-Mar-2010 21:21:57 > BAND_RX(0) =
20-Mar-2010 21:21:57 > FREQ_RX(0) =
20-Mar-2010 21:21:57 > *** invalid real number
20-Mar-2010 21:21:57 > PROP_MODE(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_EQSL_QSL_SENT(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_EQSL_QSL_RCVD(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_EQSL_QSLSDATE(0) =
20-Mar-2010 21:21:57 > *** missing date
20-Mar-2010 21:21:57 > APP_DXKeeper_EQSL_QSLRDATE(0) =
20-Mar-2010 21:21:57 > *** missing date
20-Mar-2010 21:21:57 > APP_DXKeeper_LotW_QSL_SENT(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_LotW_QSL_RCVD(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_LotW_QSLSDATE(10) = 4000-01-01
20-Mar-2010 21:21:57 > APP_DXKeeper_LotW_QSLRDATE(10) = 4000-01-01
20-Mar-2010 21:21:57 > ARRL_SECT(0) =
20-Mar-2010 21:21:57 > STATION_CALLSIGN(0) =
20-Mar-2010 21:21:57 > OWNER_CALLSIGN(0) =
20-Mar-2010 21:21:57 > QSO_COMPLETE(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_QSO_NUMBER(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > DISTANCE(0) =
20-Mar-2010 21:21:57 > *** invalid real number
20-Mar-2010 21:21:57 > APP_DXKeeper_Needed(0) =
20-Mar-2010 21:21:57 > QSO_RANDOM(0) =
20-Mar-2010 21:21:57 > SRX_STRING(0) =
20-Mar-2010 21:21:57 > STX_STRING(0) =
20-Mar-2010 21:21:57 > AGE(0) =
20-Mar-2010 21:21:57 > EQ_CALL(0) =
20-Mar-2010 21:21:57 > LAT(0) =
20-Mar-2010 21:21:57 > LON(0) =
20-Mar-2010 21:21:57 > RIG(0) =
20-Mar-2010 21:21:57 > RX_PWR(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > SIG(0) =
20-Mar-2010 21:21:57 > SIG_INFO(0) =
20-Mar-2010 21:21:57 > EMAIL(0) =
20-Mar-2010 21:21:57 > WEB(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_FILE(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_LotW_MEMBER(0) =
20-Mar-2010 21:21:57 > APP_DXKeeper_EQSL_MEMBER(0) =
20-Mar-2010 21:21:57 > SFI(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > A_INDEX(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > K_INDEX(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > QSL_SENT_VIA(0) =
20-Mar-2010 21:21:57 > QSL_RCVD_VIA(0) =
20-Mar-2010 21:21:57 > ANT_AZ(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > ANT_EL(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > FORCE_INIT(0) =
20-Mar-2010 21:21:57 > MAX_BURSTS(0) =
20-Mar-2010 21:21:57 > *** invalid long integer
20-Mar-2010 21:21:57 > MS_SHOWER(0) =
20-Mar-2010 21:21:58 > NR_BURSTS(0) =
20-Mar-2010 21:21:58 > *** invalid long integer
20-Mar-2010 21:21:58 > NR_PINGS(0) =
20-Mar-2010 21:21:58 > *** invalid long integer
20-Mar-2010 21:21:58 > ANT_PATH(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_QSL_NUMBER(0) =
20-Mar-2010 21:21:58 > *** invalid long integer
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_0(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_1(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_2(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_3(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_4(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_5(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_6(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_USER_DEFINED_7(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_SUBMODE(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_SELECT(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_TEMP(0) =
20-Mar-2010 21:21:58 > PrimaryInvalid(0) =
20-Mar-2010 21:21:58 > SecondaryInvalid(1) = N
20-Mar-2010 21:21:58 > APP_DXKeeper_DOK(0) =
20-Mar-2010 21:21:58 > APP_DXKeeper_REGION(0) =
20-Mar-2010 21:21:58 > WAZVerified(0) =
20-Mar-2010 21:21:58 > IOTAVerified(0) =
20-Mar-2010 21:21:58 > program error 3021 in module DXLogModule.FilterDisplay: No current record.
20-Mar-2010 21:21:58 > FilterDisplayState 8
20-Mar-2010 21:21:58 > Filter =
20-Mar-2010 21:21:58 > FilterCaption = Filter: None
20-Mar-2010 21:21:58 > Criteria = (Call = '') and (QSO_Begin = #2010-03-20 21:21:56#)
20-Mar-2010 21:21:58 > Fieldbox(Callfield) =
20-Mar-2010 21:21:58 > Fieldbox(QSO_BeginField) = 3/20/2010 21:21:56
20-Mar-2010 21:22:05 > program error 3021 in module DXLogModule.FilterDisplay: No current record.
20-Mar-2010 21:22:05 > FilterDisplayState 8
20-Mar-2010 21:22:05 > Filter =
20-Mar-2010 21:22:05 > FilterCaption = Filter: None
20-Mar-2010 21:22:05 > Criteria = (Call = '') and (QSO_Begin = #2010-03-20 21:21:56#)
20-Mar-2010 21:22:05 > Fieldbox(Callfield) =
20-Mar-2010 21:22:05 > Fieldbox(QSO_BeginField) = 3/20/2010 21:21:56
20-Mar-2010 21:22:05 > program error 3426 in module DXLogModule.SortDisplay, State = 5: This action was cancelled by an associated object.
20-Mar-2010 21:22:05 > program error 3021 in module DXLogMain.LogLastCmd_Click: No current record.
20-Mar-2010 21:22:10 > program error 3021 in module DXLogModule.FilterDisplay: No current record.
20-Mar-2010 21:22:10 > FilterDisplayState 8
20-Mar-2010 21:22:10 > Filter =
20-Mar-2010 21:22:10 > FilterCaption = Filter: None
20-Mar-2010 21:22:10 > Criteria = (Call = '') and (QSO_Begin = #2010-03-20 21:21:56#)
20-Mar-2010 21:22:10 > Fieldbox(Callfield) =
20-Mar-2010 21:22:10 > Fieldbox(QSO_BeginField) = 3/20/2010 21:21:56
20-Mar-2010 21:22:11 > program error 3021 in module DXLogMain.LogLastCmd_Click: No current record.
20-Mar-2010 21:22:22 > program error 3021 in module DXLogModule.FilterDisplay: No current record.
20-Mar-2010 21:22:22 > FilterDisplayState 8
20-Mar-2010 21:22:22 > Filter = (Call = 'N3BNA') or (Call LIKE '*/N3BNA') or (Call LIKE 'N3BNA/*') or (Call LIKE '*/N3BNA/*')
20-Mar-2010 21:22:22 > FilterCaption = Filter: Previous QSOs with N3BNA
20-Mar-2010 21:22:22 > Criteria = (Call = '') and (QSO_Begin = #2010-03-20 21:21:56#)
20-Mar-2010 21:22:22 > Fieldbox(Callfield) =
20-Mar-2010 21:22:22 > Fieldbox(QSO_BeginField) = 3/20/2010 21:21:56
20-Mar-2010 21:22:22 > program error 3021 in module DXLogModule.FilterPrevQSOs, state = 6: No current record.
20-Mar-2010 21:22:22 > Call:
20-Mar-2010 21:22:22 > Begin: 3/20/2010 21:21:56
20-Mar-2010 21:22:22 > Freq:
20-Mar-2010 21:22:22 > Mode:
20-Mar-2010 21:22:22 > theFilter: (Call = 'N3BNA') or (Call LIKE '*/N3BNA') or (Call LIKE 'N3BNA/*') or (Call LIKE '*/N3BNA/*')
20-Mar-2010 21:22:22 > theCapture: Filter: Previous QSOs with N3BNA
20-Mar-2010 21:22:22 > FilterDisplayState: 35
20-Mar-2010 21:22:30 > program error 3021 in module DXLogMain.CreateNewQSO, state = 3: No current record.
20-Mar-2010 21:22:30 > DXLogModule.LogFieldBoxes
20-Mar-2010 21:22:30 > Band(0) =
20-Mar-2010 21:22:30 > Call(0) =
20-Mar-2010 21:22:30 > DXCCPrefix(0) =
20-Mar-2010 21:22:30 > DXCCID(0) =
20-Mar-2010 21:22:30 > Freq(0) =
20-Mar-2010 21:22:30 > *** invalid real number
20-Mar-2010 21:22:30 > Mode(0) =
20-Mar-2010 21:22:30 > Name(0) =
20-Mar-2010 21:22:30 > Operator(0) =
20-Mar-2010 21:22:30 > QSL_Rcvd(0) =
20-Mar-2010 21:22:30 > QSL_Sent(0) =
20-Mar-2010 21:22:30 > QSL_Via(0) =
20-Mar-2010 21:22:30 > Comment(0) =
20-Mar-2010 21:22:30 > QTH(0) =
20-Mar-2010 21:22:30 > RST_Rcvd(0) =
20-Mar-2010 21:22:30 > RST_Sent(0) =
20-Mar-2010 21:22:30 > State(0) =
20-Mar-2010 21:22:30 > QSLSDATE(10) = 4000-01-01
20-Mar-2010 21:22:30 > QSLRDATE(10) = 4000-01-01
20-Mar-2010 21:22:30 > TX_Power(0) =
20-Mar-2010 21:22:30 > *** invalid long integer
20-Mar-2010 21:22:30 > QSO_Begin(18) = 3/20/2010 21:21:56
20-Mar-2010 21:22:30 > QSO_End(18) = 3/20/2010 21:22:05
20-Mar-2010 21:22:30 > QSLMsg(0) =
20-Mar-2010 21:22:30 > CONT(0) =
20-Mar-2010 21:22:30 > ITUZ(0) =
20-Mar-2010 21:22:30 > CQZ(0) =
20-Mar-2010 21:22:30 > IOTA(0) =
20-Mar-2010 21:22:30 > CNTY(0) =
20-Mar-2010 21:22:30 > CONTEST_ID(0) =
20-Mar-2010 21:22:30 > GRIDSQUARE(0) =
20-Mar-2010 21:22:30 > SRX(0) =
20-Mar-2010 21:22:30 > STX(0) =
20-Mar-2010 21:22:30 > PROVINCE(0) =
20-Mar-2010 21:22:30 > BROKEN(0) =
20-Mar-2010 21:22:30 > MYQTHID(0) =
20-Mar-2010 21:22:30 > ADDRESS(0) =
20-Mar-2010 21:22:30 > SAT_NAME(0) =
20-Mar-2010 21:22:30 > SAT_MODE(0) =
20-Mar-2010 21:22:30 > PFX(0) =
20-Mar-2010 21:22:30 > BAND_RX(0) =
20-Mar-2010 21:22:30 > FREQ_RX(0) =
20-Mar-2010 21:22:30 > *** invalid real number
20-Mar-2010 21:22:30 > PROP_MODE(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_EQSL_QSL_SENT(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_EQSL_QSL_RCVD(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_EQSL_QSLSDATE(0) =
20-Mar-2010 21:22:30 > *** missing date
20-Mar-2010 21:22:30 > APP_DXKeeper_EQSL_QSLRDATE(0) =
20-Mar-2010 21:22:30 > *** missing date
20-Mar-2010 21:22:30 > APP_DXKeeper_LotW_QSL_SENT(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_LotW_QSL_RCVD(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_LotW_QSLSDATE(10) = 4000-01-01
20-Mar-2010 21:22:30 > APP_DXKeeper_LotW_QSLRDATE(10) = 4000-01-01
20-Mar-2010 21:22:30 > ARRL_SECT(0) =
20-Mar-2010 21:22:30 > STATION_CALLSIGN(0) =
20-Mar-2010 21:22:30 > OWNER_CALLSIGN(0) =
20-Mar-2010 21:22:30 > QSO_COMPLETE(0) =
20-Mar-2010 21:22:30 > APP_DXKeeper_QSO_NUMBER(0) =
20-Mar-2010 21:22:30 > *** invalid long integer
20-Mar-2010 21:22:30 > DISTANCE(0) =
20-Mar-2010 21:22:30 > *** invalid real number
20-Mar-2010 21:22:30 > APP_DXKeeper_Needed(0) =
20-Mar-2010 21:22:30 > QSO_RANDOM(0) =
20-Mar-2010 21:22:30 > SRX_STRING(0) =
20-Mar-2010 21:22:30 > STX_STRING(0) =
20-Mar-2010 21:22:30 > AGE(0) =
20-Mar-2010 21:22:30 > EQ_CALL(0) =
20-Mar-2010 21:22:30 > LAT(0) =
20-Mar-2010 21:22:30 > LON(0) =
20-Mar-2010 21:22:30 > RIG(0) =
20-Mar-2010 21:22:31 > RX_PWR(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > SIG(0) =
20-Mar-2010 21:22:31 > SIG_INFO(0) =
20-Mar-2010 21:22:31 > EMAIL(0) =
20-Mar-2010 21:22:31 > WEB(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_FILE(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_LotW_MEMBER(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_EQSL_MEMBER(0) =
20-Mar-2010 21:22:31 > SFI(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > A_INDEX(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > K_INDEX(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > QSL_SENT_VIA(0) =
20-Mar-2010 21:22:31 > QSL_RCVD_VIA(0) =
20-Mar-2010 21:22:31 > ANT_AZ(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > ANT_EL(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > FORCE_INIT(0) =
20-Mar-2010 21:22:31 > MAX_BURSTS(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > MS_SHOWER(0) =
20-Mar-2010 21:22:31 > NR_BURSTS(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > NR_PINGS(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > ANT_PATH(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_QSL_NUMBER(0) =
20-Mar-2010 21:22:31 > *** invalid long integer
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_0(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_1(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_2(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_3(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_4(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_5(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_6(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_USER_DEFINED_7(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_SUBMODE(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_SELECT(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_TEMP(0) =
20-Mar-2010 21:22:31 > PrimaryInvalid(0) =
20-Mar-2010 21:22:31 > SecondaryInvalid(1) = N
20-Mar-2010 21:22:31 > APP_DXKeeper_DOK(0) =
20-Mar-2010 21:22:31 > APP_DXKeeper_REGION(0) =
20-Mar-2010 21:22:31 > WAZVerified(0) =
20-Mar-2010 21:22:31 > IOTAVerified(0) =
20-Mar-2010 21:23:27 > DXKeeper shutdown

11-Oct-2010 01:11:16 > DXKeeper version 8.9.4
11-Oct-2010 01:11:16 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
11-Oct-2010 01:11:16 > App.exe : DXKeeper
11-Oct-2010 01:11:16 > Operating System: Windows XP (32-bit) build 2600
11-Oct-2010 01:11:16 > Locale ID : 1033 (0x409)
11-Oct-2010 01:11:16 > ANSI CodePage : 1252
11-Oct-2010 01:11:16 > OEM CodePage : 437
11-Oct-2010 01:11:16 > Country : United States
11-Oct-2010 01:11:16 > Language : English
11-Oct-2010 01:11:16 > DXLab Apps : [CC,PF,DXV,SC]
11-Oct-2010 04:08:57 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:09:18 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:10:02 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:11:46 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:12:43 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:16:52 > DXKeeper shutdown

11-Oct-2010 04:17:19 > DXKeeper version 8.9.4
11-Oct-2010 04:17:19 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
11-Oct-2010 04:17:19 > App.exe : DXKeeper
11-Oct-2010 04:17:19 > Operating System: Windows XP (32-bit) build 2600
11-Oct-2010 04:17:19 > Locale ID : 1033 (0x409)
11-Oct-2010 04:17:19 > ANSI CodePage : 1252
11-Oct-2010 04:17:19 > OEM CodePage : 437
11-Oct-2010 04:17:19 > Country : United States
11-Oct-2010 04:17:19 > Language : English
11-Oct-2010 04:17:19 > DXLab Apps : [CC,PF,DXV]
11-Oct-2010 04:18:03 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:23:03 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:23:27 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:24:33 > DXKeeper shutdown

11-Oct-2010 04:24:58 > DXKeeper version 8.9.4
11-Oct-2010 04:24:58 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
11-Oct-2010 04:24:58 > App.exe : DXKeeper
11-Oct-2010 04:24:58 > Operating System: Windows XP (32-bit) build 2600
11-Oct-2010 04:24:58 > Locale ID : 1033 (0x409)
11-Oct-2010 04:24:58 > ANSI CodePage : 1252
11-Oct-2010 04:24:58 > OEM CodePage : 437
11-Oct-2010 04:24:58 > Country : United States
11-Oct-2010 04:24:58 > Language : English
11-Oct-2010 04:24:58 > DXLab Apps :
11-Oct-2010 04:26:35 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:27:05 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:27:36 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 04:36:44 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
11-Oct-2010 05:15:49 > DXKeeper shutdown

11-Oct-2010 13:00:04 > DXKeeper version 8.9.4
11-Oct-2010 13:00:04 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
11-Oct-2010 13:00:04 > App.exe : DXKeeper
11-Oct-2010 13:00:04 > Operating System: Windows XP (32-bit) build 2600
11-Oct-2010 13:00:04 > Locale ID : 1033 (0x409)
11-Oct-2010 13:00:04 > ANSI CodePage : 1252
11-Oct-2010 13:00:04 > OEM CodePage : 437
11-Oct-2010 13:00:04 > Country : United States
11-Oct-2010 13:00:04 > Language : English
11-Oct-2010 13:00:04 > DXLab Apps : [CC,PF,DXV,SC,WW]
11-Oct-2010 14:46:13 > program error 9 in module DXLogModule.DXCCbyQSLModeReport: Subscript out of range
12-Oct-2010 01:56:02 > DXKeeper shutdown

16-Jan-2011 16:28:45 > DXKeeper version 9.2.5
16-Jan-2011 16:28:45 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
16-Jan-2011 16:28:45 > App.exe : DXKeeper
16-Jan-2011 16:28:45 > Operating System: Windows XP (32-bit) build 2600
16-Jan-2011 16:28:45 > Locale ID : 1033 (0x409)
16-Jan-2011 16:28:45 > ANSI CodePage : 1252
16-Jan-2011 16:28:45 > OEM CodePage : 437
16-Jan-2011 16:28:45 > Country : United States
16-Jan-2011 16:28:45 > Language : English
16-Jan-2011 16:28:45 > DXLab Apps : [CC,PF,DXV,SC]
16-Jan-2011 16:31:54 > DXLogMain.TabbedDialog_Click, PreviousTab = 0
16-Jan-2011 16:31:54 > DXLogMain.TabbedDialog_Click: saved Main window height = 13620
16-Jan-2011 16:31:54 > DXLogMain.SelectTab: 1
16-Jan-2011 16:31:54 > DXLogMain.SelectTab: Main window height = 13620, width = 21660
16-Jan-2011 16:31:54 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4410, left = 23940, height = 13620, width = 21660
16-Jan-2011 16:31:54 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:31:54 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:31:54 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:31:54 > DXLogMain.Form_Resize complete
16-Jan-2011 16:31:56 > DXQSLModule.PrintQSLQueue: start, CurrentQSLMode = 4
16-Jan-2011 16:31:56 > DXQSLModule.SendLotWCards
16-Jan-2011 16:31:56 > DXQSLModule.SendLotWCards: start
16-Jan-2011 16:31:56 > DXQSLModule.SendLotWCards: ADIF file created: LotWADIFUploadFilename
16-Jan-2011 16:31:57 > Common.RestoreWindowPosition: LotWUploadForm, DualMonitor = True
16-Jan-2011 16:31:57 > from registry = (12915, 3750, 7095, 2715)
16-Jan-2011 16:31:57 > restored to = (12915, 3750, 7095, 2715)
16-Jan-2011 16:31:57 > WindowState = 0
16-Jan-2011 16:31:57 > DXQSLModule.SendLotWCards: invoking TQSL from D:&#92;Programs&#92;Ham&#92;LOTW&#92;TrustedQSL&#92;tqsl.exe with location Home
16-Jan-2011 16:31:57 > DXQSLModule.SendLotWCards: complete
16-Jan-2011 16:31:57 > DXQSLModule.PrintQSLQueue: complete
16-Jan-2011 16:32:06 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:32:06 > DXLogMain.SelectTab: 0
16-Jan-2011 16:32:07 > DXLogMain.SelectTab: Main window height = 13620, width = 21660
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize, tab = 0, windowstate = 0, top = 4410, left = 23940, height = 13620, width = 21660
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize, MainDualColumns = 1
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize, LogGridRows = 14
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize, State = 30
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize, State = 32
16-Jan-2011 16:32:07 > DXLogMain.Resize: Main height = 13620, Main width = 21660, LogGrid.Width = 21300, Border = 120
16-Jan-2011 16:32:07 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:32:07 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:32:07 > QSLFrameLeft = 120, QSLFrameWidth = 9375
16-Jan-2011 16:32:07 > DXLogMain.Form_Resize complete
16-Jan-2011 16:32:13 > DXLogMain.TabbedDialog_Click, PreviousTab = 0
16-Jan-2011 16:32:13 > DXLogMain.TabbedDialog_Click: saved Main window height = 13620
16-Jan-2011 16:32:13 > DXLogMain.SelectTab: 1
16-Jan-2011 16:32:13 > DXLogMain.SelectTab: Main window height = 13620, width = 21660
16-Jan-2011 16:32:13 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4410, left = 23940, height = 13620, width = 21660
16-Jan-2011 16:32:13 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:32:13 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:32:13 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:32:13 > DXLogMain.Form_Resize complete
16-Jan-2011 16:32:15 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:32:15 > DXLogMain.SelectTab: 2
16-Jan-2011 16:32:15 > DXLogMain.Form_Resize, tab = 2, windowstate = 0, top = 4410, left = 23940, height = 8970, width = 21660
16-Jan-2011 16:32:15 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:32:15 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:32:15 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:32:15 > DXLogMain.Form_Resize complete
16-Jan-2011 16:33:19 > DXLogMain.TabbedDialog_Click, PreviousTab = 2
16-Jan-2011 16:33:19 > DXLogMain.SelectTab: 1
16-Jan-2011 16:33:19 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4410, left = 23940, height = 13620, width = 21660
16-Jan-2011 16:33:19 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:33:19 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:33:19 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:33:19 > DXLogMain.Form_Resize complete
16-Jan-2011 16:33:19 > DXLogMain.SelectTab: Main window height = 8970, width = 21660
16-Jan-2011 16:33:19 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4410, left = 23940, height = 8970, width = 21660
16-Jan-2011 16:33:19 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:33:19 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:33:19 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:33:19 > DXLogMain.Form_Resize complete
16-Jan-2011 16:33:22 > DXQSLModule.PrintQSLQueue: start, CurrentQSLMode = 4
16-Jan-2011 16:33:22 > DXQSLModule.SendLotWCards
16-Jan-2011 16:33:22 > DXQSLModule.SendLotWCards: start
16-Jan-2011 16:33:23 > DXQSLModule.SendLotWCards: ADIF file created: LotWADIFUploadFilename
16-Jan-2011 16:33:23 > Common.RestoreWindowPosition: LotWUploadForm, DualMonitor = True
16-Jan-2011 16:33:23 > from registry = (12915, 3750, 7095, 2715)
16-Jan-2011 16:33:23 > restored to = (12915, 3750, 7095, 2715)
16-Jan-2011 16:33:23 > WindowState = 0
16-Jan-2011 16:33:23 > DXQSLModule.SendLotWCards: invoking TQSL from D:&#92;Programs&#92;Ham&#92;LOTW&#92;TrustedQSL&#92;tqsl.exe with location Home
16-Jan-2011 16:33:23 > DXQSLModule.SendLotWCards: complete
16-Jan-2011 16:33:23 > DXQSLModule.PrintQSLQueue: complete
16-Jan-2011 16:34:42 > Capture.Form_Resize
16-Jan-2011 16:34:46 > DXLogMain.Form_Resize: entered with WindowState minimized
16-Jan-2011 16:37:23 > DDE Command: 001activate
16-Jan-2011 16:37:23 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4440, left = 24000, height = 8970, width = 12000
16-Jan-2011 16:37:23 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:37:23 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:37:23 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:37:23 > DXLogMain.Form_Resize complete
16-Jan-2011 16:37:33 > Capture.Form_Resize
16-Jan-2011 16:37:42 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:37:42 > DXLogMain.SelectTab: 0
16-Jan-2011 16:37:42 > DXLogMain.SelectTab: Main window height = 13620, width = 12000
16-Jan-2011 16:37:42 > DXLogMain.Form_Resize, tab = 0, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 12000
16-Jan-2011 16:37:42 > DXLogMain.Form_Resize, MainDualColumns = 1
16-Jan-2011 16:37:42 > DXLogMain.Form_Resize, LogGridRows = 14
16-Jan-2011 16:37:42 > DXLogMain.Form_Resize, State = 30
16-Jan-2011 16:37:42 > DXLogMain.Form_Resize, State = 32
16-Jan-2011 16:37:42 > DXLogMain.Resize: Main height = 13620, Main width = 19410, LogGrid.Width = 19050, Border = 120
16-Jan-2011 16:37:43 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:37:43 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:37:43 > QSLFrameLeft = 120, QSLFrameWidth = 9375
16-Jan-2011 16:37:43 > DXLogMain.Form_Resize complete
16-Jan-2011 16:37:45 > DXLogMain.TabbedDialog_Click, PreviousTab = 0
16-Jan-2011 16:37:45 > DXLogMain.TabbedDialog_Click: saved Main window height = 13620
16-Jan-2011 16:37:45 > DXLogMain.SelectTab: 1
16-Jan-2011 16:37:45 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:37:45 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 19410
16-Jan-2011 16:37:46 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:37:46 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:37:46 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:37:46 > DXLogMain.Form_Resize complete
16-Jan-2011 16:37:47 > DXQSLModule.PrintQSLQueue: start, CurrentQSLMode = 4
16-Jan-2011 16:37:47 > DXQSLModule.SendLotWCards
16-Jan-2011 16:37:47 > DXQSLModule.SendLotWCards: start
16-Jan-2011 16:37:47 > DXQSLModule.SendLotWCards: ADIF file created: LotWADIFUploadFilename
16-Jan-2011 16:37:47 > Common.RestoreWindowPosition: LotWUploadForm, DualMonitor = True
16-Jan-2011 16:37:47 > from registry = (9810, 3540, 7095, 2715)
16-Jan-2011 16:37:47 > restored to = (9810, 3540, 7095, 2715)
16-Jan-2011 16:37:47 > WindowState = 0
16-Jan-2011 16:37:47 > DXQSLModule.SendLotWCards: invoking TQSL from D:&#92;Programs&#92;Ham&#92;LOTW&#92;TrustedQSL&#92;tqsl.exe with location Home
16-Jan-2011 16:37:47 > DXQSLModule.SendLotWCards: complete
16-Jan-2011 16:37:47 > DXQSLModule.PrintQSLQueue: complete
16-Jan-2011 16:39:25 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:39:25 > DXLogMain.SelectTab: 0
16-Jan-2011 16:39:25 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize, tab = 0, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 19410
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize, MainDualColumns = 1
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize, LogGridRows = 14
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize, State = 30
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize, State = 32
16-Jan-2011 16:39:25 > DXLogMain.Resize: Main height = 13620, Main width = 19410, LogGrid.Width = 19050, Border = 120
16-Jan-2011 16:39:25 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:39:25 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:39:25 > QSLFrameLeft = 120, QSLFrameWidth = 9375
16-Jan-2011 16:39:25 > DXLogMain.Form_Resize complete
16-Jan-2011 16:39:28 > DXLogMain.TabbedDialog_Click, PreviousTab = 0
16-Jan-2011 16:39:28 > DXLogMain.TabbedDialog_Click: saved Main window height = 13620
16-Jan-2011 16:39:28 > DXLogMain.SelectTab: 1
16-Jan-2011 16:39:28 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:39:28 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 19410
16-Jan-2011 16:39:28 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:39:28 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:39:28 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:39:28 > DXLogMain.Form_Resize complete
16-Jan-2011 16:39:42 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:39:42 > DXLogMain.SelectTab: 0
16-Jan-2011 16:39:42 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize, tab = 0, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 19410
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize, MainDualColumns = 1
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize, LogGridRows = 14
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize, State = 30
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize, State = 32
16-Jan-2011 16:39:42 > DXLogMain.Resize: Main height = 13620, Main width = 19410, LogGrid.Width = 19050, Border = 120
16-Jan-2011 16:39:42 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:39:42 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:39:42 > QSLFrameLeft = 120, QSLFrameWidth = 9375
16-Jan-2011 16:39:42 > DXLogMain.Form_Resize complete
16-Jan-2011 16:40:08 > DXLogMain.TabbedDialog_Click, PreviousTab = 0
16-Jan-2011 16:40:08 > DXLogMain.TabbedDialog_Click: saved Main window height = 13620
16-Jan-2011 16:40:08 > DXLogMain.SelectTab: 1
16-Jan-2011 16:40:08 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:40:08 > DXLogMain.Form_Resize, tab = 1, windowstate = 0, top = 4440, left = 24000, height = 13620, width = 19410
16-Jan-2011 16:40:08 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:40:08 > MainDualColumns checked, QSOFrameTop = 360, QSLFrameTop = 2220
16-Jan-2011 16:40:08 > QSLFrameLeft = -74880, QSLFrameWidth = 9375
16-Jan-2011 16:40:08 > DXLogMain.Form_Resize complete
16-Jan-2011 16:40:10 > DXQSLModule.PrintQSLQueue: start, CurrentQSLMode = 4
16-Jan-2011 16:40:10 > DXQSLModule.SendLotWCards
16-Jan-2011 16:40:10 > DXQSLModule.SendLotWCards: start
16-Jan-2011 16:40:10 > DXQSLModule.SendLotWCards: ADIF file created: LotWADIFUploadFilename
16-Jan-2011 16:40:10 > Common.RestoreWindowPosition: LotWUploadForm, DualMonitor = False
16-Jan-2011 16:40:10 > from registry = (9810, 3540, 7095, 2715)
16-Jan-2011 16:40:10 > restored to = (9810, 3540, 7095, 2715)
16-Jan-2011 16:40:10 > WindowState = 0
16-Jan-2011 16:40:10 > DXQSLModule.SendLotWCards: invoking TQSL from D:&#92;Programs&#92;Ham&#92;LOTW&#92;TrustedQSL&#92;tqsl.exe with location Home
16-Jan-2011 16:40:10 > DXQSLModule.SendLotWCards: complete
16-Jan-2011 16:40:10 > DXQSLModule.PrintQSLQueue: complete
16-Jan-2011 16:40:32 > DXLogMain.Form_Unload - begin
16-Jan-2011 16:40:32 > DXLogMain.Form_Unload - starting automatic log backup
16-Jan-2011 16:40:32 > DXLogModule.BackupLog, CloseLog = True, Interactive = False, LogPathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:32 > DXLogModule.CloseLog
16-Jan-2011 16:40:32 > DXLogModule.SaveLogOrder
16-Jan-2011 16:40:33 > DXLogModule.SavePrevFieldValues, PrevFieldValue(QSO_BeginField) = 1/15/2011 19:37:00
16-Jan-2011 16:40:33 > DXLogModule.CloseLog: complete
16-Jan-2011 16:40:33 > DXLogModule.BackupLog BackupFilename = WD8JJA_2011-01-16_16-40-33, BackupDirectory = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Backups
16-Jan-2011 16:40:33 > DXLogModule.BackupLog BackupPathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Backups&#92;WD8JJA_2011-01-16_16-40-33.mdb
16-Jan-2011 16:40:33 > DXLogModule.BackupLog: copying log file
16-Jan-2011 16:40:33 > DXLogModule.BackupLog: backup created
16-Jan-2011 16:40:33 > DXLogModule.BackupLog: re-opening log file
16-Jan-2011 16:40:33 > DXLogModule.OpenLog: D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:33 > DXLogModule.OfferBackupIfObsoleteState, Pathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:33 > BackupState = 10, CurrentBackupState = 10
16-Jan-2011 16:40:33 > DXLogModule.OfferBackupIfObsoleteState complete
16-Jan-2011 16:40:33 > DXQSLModule.ConfigureQSLTable: start, Pathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb, OnlyIfInLog = True
16-Jan-2011 16:40:33 > DXQSLModule.ConfigureQSLTable: QSLRecordset.Fields.Count = 72, expected = 72
16-Jan-2011 16:40:33 > DXLogModule.CreateQTHTableIfMissing
16-Jan-2011 16:40:33 > DXLogModule.UpdateFields: Restart = False
16-Jan-2011 16:40:33 > DXLogMain.QSLMode_Click, Index = 4
16-Jan-2011 16:40:33 > UserDefinedFieldsModule.LoadSettings
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize0
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname0
16-Jan-2011 16:40:33 > 0 caption = 10-10#
16-Jan-2011 16:40:33 > 0 initialize = 0
16-Jan-2011 16:40:33 > 0 default =
16-Jan-2011 16:40:33 > 0 style = Alphanumeric
16-Jan-2011 16:40:33 > 0 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault0
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize1
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname1
16-Jan-2011 16:40:33 > 1 caption = SKCC#
16-Jan-2011 16:40:33 > 1 initialize = 0
16-Jan-2011 16:40:33 > 1 default =
16-Jan-2011 16:40:33 > 1 style = Alphanumeric
16-Jan-2011 16:40:33 > 1 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault1
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize2
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname2
16-Jan-2011 16:40:33 > 2 caption = Net?
16-Jan-2011 16:40:33 > 2 initialize = 0
16-Jan-2011 16:40:33 > 2 default =
16-Jan-2011 16:40:33 > 2 style = Alphanumeric
16-Jan-2011 16:40:33 > 2 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault2
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize3
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname3
16-Jan-2011 16:40:33 > 3 caption = Special Event
16-Jan-2011 16:40:33 > 3 initialize = 0
16-Jan-2011 16:40:33 > 3 default =
16-Jan-2011 16:40:33 > 3 style = Alphanumeric
16-Jan-2011 16:40:33 > 3 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault3
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize4
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname4
16-Jan-2011 16:40:33 > 4 caption = Fists#
16-Jan-2011 16:40:33 > 4 initialize = 0
16-Jan-2011 16:40:33 > 4 default =
16-Jan-2011 16:40:33 > 4 style = Alphanumeric
16-Jan-2011 16:40:33 > 4 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault4
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize5
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname5
16-Jan-2011 16:40:33 > 5 caption = SMIRK#
16-Jan-2011 16:40:33 > 5 initialize = 0
16-Jan-2011 16:40:33 > 5 default =
16-Jan-2011 16:40:33 > 5 style = Alphanumeric
16-Jan-2011 16:40:33 > 5 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault5
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize6
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname6
16-Jan-2011 16:40:33 > 6 caption = IOTA
16-Jan-2011 16:40:33 > 6 initialize = 0
16-Jan-2011 16:40:33 > 6 default =
16-Jan-2011 16:40:33 > 6 style = Alphanumeric
16-Jan-2011 16:40:33 > 6 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault6
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFInitialize7
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFPathname7
16-Jan-2011 16:40:33 > 7 caption = Lighthouse
16-Jan-2011 16:40:33 > 7 initialize = 0
16-Jan-2011 16:40:33 > 7 default =
16-Jan-2011 16:40:33 > 7 style = Alphanumeric
16-Jan-2011 16:40:33 > 7 pathname =
16-Jan-2011 16:40:33 > DXLogModule.GetLogSettings: attempt to query UDFDefault7
16-Jan-2011 16:40:33 > DXLogModule.OpenQTHRecordset: start
16-Jan-2011 16:40:33 > DXLogModule.OpenQTHRecordset: complete
16-Jan-2011 16:40:33 > DXLogMain.DXCCEntityCombo_Click, IgnoreDXCCEntityComboClick = True
16-Jan-2011 16:40:34 > DXLogMain.LogPosition_Reposition: ignored
16-Jan-2011 16:40:34 > DXLogmodule.InitializeLogLayout
16-Jan-2011 16:40:34 > DXLogmodule.InitializeLogLayout, theLogGridSplitSize(0) = 1, theLogGridSplitSize(1) = 0
16-Jan-2011 16:40:34 > LogLayoutArrayDepth = 11
16-Jan-2011 16:40:34 > loading layout from registry
16-Jan-2011 16:40:34 > DXLogModule.ImplementLogLayout
16-Jan-2011 16:40:34 > DXLogModule.RestoreHorizontalScroll
16-Jan-2011 16:40:35 > CurrentLeftCol =
16-Jan-2011 16:40:35 > DXLogModule.SaveLogOrder
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayout, LogLayoutArray.UpperBound(1) = 11
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 0, Name = Call
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 1, Name = DXCCPrefix
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 2, Name = QSO_Begin
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 3, Name = Band
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 4, Name = Mode
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 5, Name = RST_Sent
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 6, Name = RST_Rcvd
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 7, Name = Name
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 8, Name = APP_DXKeeper_USER_DEFINED_0
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 9, Name = STATE
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 10, Name = APP_DXKeeper_LotW_QSLRDATE
16-Jan-2011 16:40:35 > DXLogModule.SaveLogLayoutRow 11, Name = QSLSDATE
16-Jan-2011 16:40:35 > DXLogModule.InitializeLogLayout, DXLogMain.LogGrid.RowHeight = 225.0709
16-Jan-2011 16:40:36 > DXLogModule.InitializePrevFieldValues, initial QSO_Begin = 1/15/2011 19:37:00
16-Jan-2011 16:40:37 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:37 > DXLogModule.UpdateDetailGrid: 1A
16-Jan-2011 16:40:37 > DXLogModule.UpdateDetailGrid: complete
16-Jan-2011 16:40:37 > DDEClientModule.DXViewNewLog: D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:37 > DDEClientModule.DXViewNewLog: LinkExecute succeeded
16-Jan-2011 16:40:37 > DXLogSetup.SaveLogPathname: saved LogPathname to registry: D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:37 > DXLogModule.UpdateLog starting
16-Jan-2011 16:40:37 > DXLogModule.RestoreSort start
16-Jan-2011 16:40:37 > DXLogModule.SortDisplay start
16-Jan-2011 16:40:37 > DXLogMain.LogPosition_Reposition: ignored
16-Jan-2011 16:40:37 > DXLogMain.DXCCEntityCombo_Click, IgnoreDXCCEntityComboClick = True
16-Jan-2011 16:40:37 > DXLogMain.LogPosition_Reposition: ignored
16-Jan-2011 16:40:37 > DXLogModule.FormatLogGrid: start
16-Jan-2011 16:40:38 > DXLogModule.RestoreHorizontalScroll
16-Jan-2011 16:40:38 > CurrentLeftCol =
16-Jan-2011 16:40:38 > DXLogModule.FormatLogGrid: complete
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: ignored
16-Jan-2011 16:40:38 > DXLogModule.RestoreSort complete
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: ignored
16-Jan-2011 16:40:38 > DXLogModule.OpenLog complete
16-Jan-2011 16:40:38 > DXLogModule.BackupLog: log file re-opened
16-Jan-2011 16:40:38 > DXLogModule.BackupLog: complete
16-Jan-2011 16:40:38 > DXLogModule.RestoreSort start
16-Jan-2011 16:40:38 > DXLogModule.SortDisplay start
16-Jan-2011 16:40:38 > DXLogMain.DXCCEntityCombo_Click, IgnoreDXCCEntityComboClick = True
16-Jan-2011 16:40:38 > DXLogModule.UpdateFieldVisibility, DXCCID = 60
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: RepositionCallsign = C6ABC, RepositionAbsolute = 0
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: complete
16-Jan-2011 16:40:38 > DXLogMain.DXCCEntityCombo_Click, IgnoreDXCCEntityComboClick = True
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: RepositionCallsign = SV4FFK, RepositionAbsolute = 4092
16-Jan-2011 16:40:38 > DXLogMain.LogPosition_Reposition: complete
16-Jan-2011 16:40:38 > DXLogModule.FormatLogGrid: start
16-Jan-2011 16:40:39 > DXLogModule.RestoreHorizontalScroll
16-Jan-2011 16:40:39 > CurrentLeftCol =
16-Jan-2011 16:40:39 > DXLogModule.FormatLogGrid: complete
16-Jan-2011 16:40:39 > DXLogMain.LogPosition_Reposition: RepositionCallsign = SV4FFK, RepositionAbsolute = 4092
16-Jan-2011 16:40:39 > DXLogMain.LogPosition_Reposition: complete
16-Jan-2011 16:40:39 > DXLogModule.RestoreSort complete
16-Jan-2011 16:40:39 > DXLogMain.Form_Unload - automatic log backup completed
16-Jan-2011 16:40:39 > DDEServerModule.Terminate
16-Jan-2011 16:40:39 > DDEServerModule.Terminate: Launcher notified
16-Jan-2011 16:40:39 > DXLogMain.Form_Unload - DDEServerModule terminated
16-Jan-2011 16:40:39 > DDEClientModule.DXViewNewLog:
16-Jan-2011 16:40:39 > DDEClientModule.DXViewNewLog: LinkExecute succeeded
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: CC False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: CC False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: PF False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: SC False
16-Jan-2011 16:40:39 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:39 > DXLogMain.Form_Unload - DDEClientModule terminated
16-Jan-2011 16:40:39 > DXLogMain.Form_Unload - DXQSLModule terminated
16-Jan-2011 16:40:39 > DXLogMain.SelectTab: 0
16-Jan-2011 16:40:39 > DXLogMain.TabbedDialog_Click, PreviousTab = 1
16-Jan-2011 16:40:39 > DXLogMain.RowChangeLookupTimer_Timer
16-Jan-2011 16:40:39 > DXLogModule.UpdateFieldVisibility, DXCCID = 236
16-Jan-2011 16:40:39 > DXLogModule.UpdateProgressDisplays
16-Jan-2011 16:40:39 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:40 > DXLogModule.UpdateDetailGrid: SV
16-Jan-2011 16:40:40 > DXLogModule.UpdateDetailGrid: complete
16-Jan-2011 16:40:40 > DXLogMain.RowChangeLookup (not suppressed) SV4FFK
16-Jan-2011 16:40:40 > DDEClientModule.PrefixLookup, theCallsign = SV4FFK, theDXCCPrefix = SV
16-Jan-2011 16:40:40 > DDEClientModule.PrefixLookup via DXView PrefixLookupCommand
16-Jan-2011 16:40:40 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:40 > DDEClientModule.PrefixLookup invoking DXLogModule.Lookup because theError = 293
16-Jan-2011 16:40:40 > DXLogModule.Lookup, Callsign = SV4FFK
16-Jan-2011 16:40:40 > DXLogModule.GetPrefix no match: SV4FFK
16-Jan-2011 16:40:40 > DXLogModule.GetPrefix no match: SV4FF
16-Jan-2011 16:40:40 > DXLogModule.GetPrefix no match: SV4F
16-Jan-2011 16:40:40 > DXLogModule.GetPrefix match: SV4, DXCCPrefix = SV
16-Jan-2011 16:40:40 > DXLogModule.QSLsViaLotW, NewCallsign = SV4FFK
16-Jan-2011 16:40:40 > DXLogModule.QSLsViaLotW, result =
16-Jan-2011 16:40:40 > DXLogModule.QSLsViaeQSL, NewCallsign = SV4FFK
16-Jan-2011 16:40:40 > DXLogModule.QSLsViaeQSL, result = A
16-Jan-2011 16:40:40 > DDEClientModule.PrefixLookup, LotW = , eQSL = A
16-Jan-2011 16:40:40 > DDEClient.UpdateGrid: KM19lj
16-Jan-2011 16:40:40 > DDEClientModule.HandleDXViewDDEError
16-Jan-2011 16:40:40 > DDEClientModule.SetServerConnnected: DXV False
16-Jan-2011 16:40:40 > DXLogMain.RowChangeLookupTimer_Timer: complete
16-Jan-2011 16:40:40 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:40:40 > DXLogMain.Form_Unload - saving window position, state = 0
16-Jan-2011 16:40:40 > Capture.Form_QueryUnload
16-Jan-2011 16:40:40 > Capture.Form_Unload
16-Jan-2011 16:40:40 > AdvancedFilter.Form_Unload
16-Jan-2011 16:40:40 > DXLogSetup.Form_Unload
16-Jan-2011 16:40:40 > DXLogModule.CloseLog
16-Jan-2011 16:40:40 > DXLogModule.SaveLogOrder
16-Jan-2011 16:40:41 > DXLogModule.SavePrevFieldValues, PrevFieldValue(QSO_BeginField) = 1/15/2011 19:37:00
16-Jan-2011 16:40:41 > DXLogModule.CloseLog: complete
16-Jan-2011 16:40:41 > DXLogMain.Form_Unload - forms unloaded
16-Jan-2011 16:40:41 > DXLogMain.Form_Unload - DXLogModule terminated
16-Jan-2011 16:40:41 > DXKeeper shutdown

16-Jan-2011 16:40:47 > DXKeeper version 9.2.5
16-Jan-2011 16:40:47 > App.Path : D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper
16-Jan-2011 16:40:47 > App.exe : DXKeeper
16-Jan-2011 16:40:47 > Operating System: Windows XP (32-bit) build 2600
16-Jan-2011 16:40:47 > Locale ID : 1033 (0x409)
16-Jan-2011 16:40:47 > ANSI CodePage : 1252
16-Jan-2011 16:40:47 > OEM CodePage : 437
16-Jan-2011 16:40:47 > Country : United States
16-Jan-2011 16:40:47 > Language : English
16-Jan-2011 16:40:47 > DXLab Apps :
16-Jan-2011 16:40:47 > DXLogMain.Form_Load - Common initialized
16-Jan-2011 16:40:47 > LocaleInfo.Display: decimal symbol : , [ascii 44]
16-Jan-2011 16:40:47 > LocaleInfo.Display: digit grouping symbol: . [ascii 46]
16-Jan-2011 16:40:47 > LocaleInfo.Display: date separator : / [ascii 47]
16-Jan-2011 16:40:47 > LocaleInfo.Display: time separator : : [ascii 58]
16-Jan-2011 16:40:47 > DXLogMain.Form_Load, MainWindowState from registry = 0
16-Jan-2011 16:40:47 > DXLogMain.Form_Load: Main window height = 13620
16-Jan-2011 16:40:47 > DXLogMain.SelectTab: 0
16-Jan-2011 16:40:47 > DXLogMain.SelectTab: Main window height = 13620, width = 19410
16-Jan-2011 16:40:47 > RegionModule.Initialize started
16-Jan-2011 16:40:47 > RegionModule.Initialize completed
16-Jan-2011 16:40:47 > UserDefinedFieldsModule.Initialize
16-Jan-2011 16:40:47 > Capture.Form_Load
16-Jan-2011 16:40:47 > Capture.Form_Resize
16-Jan-2011 16:40:47 > Common.RestoreWindowPosition: Capture, DualMonitor = False
16-Jan-2011 16:40:47 > from registry = (17940, 10995, 6135, 6855)
16-Jan-2011 16:40:47 > restored to = (17940, 10995, 6135, 6855)
16-Jan-2011 16:40:47 > WindowState = 0
16-Jan-2011 16:40:47 > DXLogMain.Form_Load - Capture window loaded
16-Jan-2011 16:40:47 > DXLogModule.Initialize - begin
16-Jan-2011 16:40:47 > DXLogModule.Initialize - DXLogMain initialized
16-Jan-2011 16:40:47 > DXLogModule.Initialize - InitializeQSOTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.Initialize - InitializeProgressTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.Initialize - WAZInitializeProgressTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.Initialize - MarathonInitializeProgressTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.Initialize - InitializeQTHTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.Initialize - InitializeSettingsTableDefinitions complete
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray: start
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray: reading from D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;DefaultBands.txt
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 2190M 0.136 0.137
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 560M 0.501 0.504
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 160M 1.8 2
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 80M 3.5 4
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 60M 5.3305 5.405
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 40M 7 7.35
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 30M 10.1 10.15
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 20M 14 14.35
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 17M 18.068 18.168
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 15M 21 21.45
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 12M 24.89 24.99
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 10M 28 29.9
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 6M 50 54
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 4M 70 71
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 2M 144 148
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 1.25M 222 225
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 70CM 420 450
16-Jan-2011 16:40:47 > DXLogModule.InitializeBandArray 33CM 902 928
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 23CM 1240 1300
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 13CM 2300 2450
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 9CM 3300 3500
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 6CM 5650 5925
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 3CM 10000 10500
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 1.25CM 24000 24250
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 6MM 47000 47200
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 4MM 75500 81000
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 2.5MM 119980 120020
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 2MM 142000 149000
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray 1MM 241000 250000
16-Jan-2011 16:40:48 > DXLogModule.InitializeBandArray SUBMM 300000 1000000
16-Jan-2011 16:40:48 > DXLogModule.Initialize - InitializeBandArray complete
16-Jan-2011 16:40:48 > DXLogModule.Initialize - InitializeQTHArrays complete
16-Jan-2011 16:40:48 > DXLogModule.Initialize - InitializeFilters complete
16-Jan-2011 16:40:48 > DXLogModule.Initialize - InitializeModes complete
16-Jan-2011 16:40:48 > DXLogModule.OpenSubdivisionDatabases: opening Primary Subdivision database in D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;PrimarySubdivisionDatabase.mdb
16-Jan-2011 16:40:48 > DXLogModule.OpenSubdivisionDatabases: opening Secondary Subdivision database in D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;SecondarySubdivisionDatabase.mdb
16-Jan-2011 16:40:48 > DXLogModule.OpenSubdivisionDatabases complete
16-Jan-2011 16:40:48 > DXLogModule.OpenDXCCDatabase, DXCCDatabasePathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxView&#92;Databases&#92;DXCC.mdb
16-Jan-2011 16:40:48 > DXLogModule.Initialize - DXCCDatabase opened
16-Jan-2011 16:40:48 > Common.RestoreWindowPosition: AwardProgressUI, DualMonitor = False
16-Jan-2011 16:40:48 > from registry = (1050, 5760, 11475, 6120)
16-Jan-2011 16:40:48 > restored to = (1050, 5760, 11295, 7350)
16-Jan-2011 16:40:48 > WindowState = 0
16-Jan-2011 16:40:49 > DXLogModule.Initialize - InitializeCombos complete
16-Jan-2011 16:40:49 > DXLogModule.Initialize - InitializeFields complete
16-Jan-2011 16:40:50 > DXLogModule.Initialize - InitializeDXCCCombo complete
16-Jan-2011 16:40:50 > Common.RestoreWindowPosition: QSLSetup, DualMonitor = False
16-Jan-2011 16:40:50 > from registry = (31365, 4845, 7905, 8640)
16-Jan-2011 16:40:50 > restored to = (0, 4845, 7905, 8640)
16-Jan-2011 16:40:50 > WindowState = 0
16-Jan-2011 16:40:50 > DXQSLModule.UpdateLotWStationLocations: AppData folder = C:&#92;Documents and Settings&#92;WD8JJA&#92;Application Data&#92;TrustedQSL&#92;station_data
16-Jan-2011 16:40:50 > <StationDataFile>
16-Jan-2011 16:40:50 > <StationData name="Mobile">
16-Jan-2011 16:40:50 > <CALL>WD8JJA/M</CALL>
16-Jan-2011 16:40:50 > <CQZ>4</CQZ>
16-Jan-2011 16:40:50 > <DXCC>291</DXCC>
16-Jan-2011 16:40:50 > <GRIDSQUARE>EM68rv</GRIDSQUARE>
16-Jan-2011 16:40:50 > <ITUZ>8</ITUZ>
16-Jan-2011 16:40:50 > <US_COUNTY>Lawrence</US_COUNTY>
16-Jan-2011 16:40:50 > <US_STATE>IN</US_STATE>
16-Jan-2011 16:40:50 > </StationData>
16-Jan-2011 16:40:50 > <StationData name="Home">
16-Jan-2011 16:40:50 > <CALL>WD8JJA</CALL>
16-Jan-2011 16:40:50 > <CQZ>4</CQZ>
16-Jan-2011 16:40:50 > <DXCC>291</DXCC>
16-Jan-2011 16:40:50 > <GRIDSQUARE>EM68rv</GRIDSQUARE>
16-Jan-2011 16:40:50 > <ITUZ>8</ITUZ>
16-Jan-2011 16:40:50 > <US_COUNTY>Lawrence</US_COUNTY>
16-Jan-2011 16:40:50 > <US_STATE>IN</US_STATE>
16-Jan-2011 16:40:50 > </StationData>
16-Jan-2011 16:40:50 > </StationDataFile>
16-Jan-2011 16:40:50 > QSLSetup.InitializePrinter: 3 available printers
16-Jan-2011 16:40:50 > Microsoft XPS Document Writer
16-Jan-2011 16:40:50 > Lexmark Z700-P700 Series
16-Jan-2011 16:40:50 > &#92;&#92;FAMILYCOMPUTER&#92;Loft Printer
16-Jan-2011 16:40:50 > QSLSetup.PrinterName_Click: Lexmark Z700-P700 Series
16-Jan-2011 16:40:50 > DXQSLModule.SelectPrinterQuality: -3
16-Jan-2011 16:40:51 > QSLSetup.UpdatePaperSources
16-Jan-2011 16:40:51 > selecting printer
16-Jan-2011 16:40:51 > determining # of paper sources
16-Jan-2011 16:40:51 > 1 paper sources
16-Jan-2011 16:40:51 > requesting bins
16-Jan-2011 16:40:51 > requesting bin names
16-Jan-2011 16:40:51 > bin and bin name requests succeeded
16-Jan-2011 16:40:51 > 1 Automatic 1
16-Jan-2011 16:40:51 > paper source selection from registry = automatic
16-Jan-2011 16:40:51 > selected item source index = 0
16-Jan-2011 16:40:51 > seleting paper bin 1
16-Jan-2011 16:40:51 > paper bin selection succeeded
16-Jan-2011 16:40:51 > envelope source selection from registry = automatic
16-Jan-2011 16:40:51 > selected item source index = 0
16-Jan-2011 16:40:51 > seleting paper bin 1
16-Jan-2011 16:40:51 > envelope bin selection succeeded
16-Jan-2011 16:40:51 > Common.RestoreWindowPosition: DatabaseInfo, DualMonitor = False
16-Jan-2011 16:40:51 > from registry = (25215, 5790, 7515, 4200)
16-Jan-2011 16:40:51 > restored to = (0, 5790, 7515, 4200)
16-Jan-2011 16:40:51 > WindowState = 0
16-Jan-2011 16:40:51 > DXLogModule.Initialize - LotWDatabase opened
16-Jan-2011 16:40:51 > DXLogModule.Initialize - eQSLDatabase opened
16-Jan-2011 16:40:51 > Common.RestoreWindowPosition: AdvancedFilter, DualMonitor = False
16-Jan-2011 16:40:51 > from registry = (24000, 4440, 11340, 8760)
16-Jan-2011 16:40:51 > restored to = (0, 4440, 11340, 8760)
16-Jan-2011 16:40:51 > WindowState = 0
16-Jan-2011 16:40:51 > AdvancedFilter.Form_Load, theCurrentTime = 1/16/2011 4:40:51 PM, PrevDay = 1/15/2011 4:40:51 PM, theFormat = ddddd hh:nn
16-Jan-2011 16:40:51 > DXLogModule.Initialize - InitializeBandModeFilters complete
16-Jan-2011 16:40:51 > DXLogModule.Initialize - InitializeSQLSortandFilters complete
16-Jan-2011 16:40:51 > DXLogModule.InitializeStateAbbrevArray - Initialize complete
16-Jan-2011 16:40:51 > DXLogModule.Initialize - complete
16-Jan-2011 16:40:51 > DXLogMain.Form_Load - DXLogModule initialized
16-Jan-2011 16:40:52 > Common.RestoreWindowPosition: DXLogSetup, DualMonitor = False
16-Jan-2011 16:40:52 > from registry = (25725, 4440, 11040, 9420)
16-Jan-2011 16:40:52 > restored to = (0, 4440, 11040, 9420)
16-Jan-2011 16:40:52 > WindowState = 0
16-Jan-2011 16:40:52 > DXLogSetup.Form_Load: starting
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 0, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 1, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 2, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 3, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 4, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 5, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.LogFrameVisible_Click, Index = 6, MakeVisible = True, LogFrameVisibleShift = 0
16-Jan-2011 16:40:52 > DXLogSetup.UpdateQSLKeyVisibility
16-Jan-2011 16:40:52 > MainDualColumns not checked
16-Jan-2011 16:40:52 > DXLogSetup.DisplayLotWeQSLStatus_Click
16-Jan-2011 16:40:52 > DXLogMain.UpdateFetchRowStyleEnable: True
16-Jan-2011 16:40:52 > Common.RestoreWindowPosition: AddressEditor, DualMonitor = False
16-Jan-2011 16:40:52 > from registry = (11730, 6510, 6135, 5745)
16-Jan-2011 16:40:52 > restored to = (11730, 6510, 6135, 5745)
16-Jan-2011 16:40:52 > WindowState = 0
16-Jan-2011 16:40:53 > DXLogMain.UpdateFetchRowStyleEnable: True
16-Jan-2011 16:40:53 > DXLogModule.FormatLogGrid: start
16-Jan-2011 16:40:53 > DXLogModule.InitializeDefaultQTH
16-Jan-2011 16:40:53 > DefaultQTH.Latitude.Degrees = 38
16-Jan-2011 16:40:53 > DefaultQTH.Latitude.Minutes = 52
16-Jan-2011 16:40:53 > DefaultQTH.Latitude.Sign = -1
16-Jan-2011 16:40:53 > DefaultQTH.Longitude.Degrees = 86
16-Jan-2011 16:40:53 > DefaultQTH.Longitude.Minutes = 35
16-Jan-2011 16:40:53 > DefaultQTH.Longitude.Sign = -1
16-Jan-2011 16:40:53 > DXGridModule.GetGridSquare
16-Jan-2011 16:40:53 > DXGridModule.GetGridSquare
16-Jan-2011 16:40:53 > DXLogSetup.Form_Load: restored LogPathname from registry: D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:53 > DXLogSetup.Form_Load: LogPathname = D:&#92;Programs&#92;Ham&#92;DXLab Suite&#92;DxKeeper&#92;Databases&#92;WD8JJA.mdb
16-Jan-2011 16:40:53 > Common.SetBrowserPathname, thePath =
16-Jan-2011 16:40:53 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:53 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:53 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:53 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogModule.UpdateDetailGrid
16-Jan-2011 16:40:54 > DXLogSetup.InitializeUserDefinedFields
16-Jan-2011 16:40:54 > DXLogSetup.MainDualColumns_Click, DualColumns.Value = 1
1


Marathon stats

Art K6XT <k6xt@...>
 

Would it be feasible to put a little tally text line in DXKeeper's RAT
Marathon Award Progress Filter panel, that shows the latest totals
according to the band and mode selectors?

--
73 Art
Allison, Colorado
A glass is good, and a lass is good,
And a pipe to smoke in cold weather;
The world is good, and the people are good,
And we ’re all good fellows together.
John O’Keefe
Happy New Year!


Connect and disconnect Cluster

Koen
 

Dave,

The Sysop of ON0DXK mailed me today and told me i am connecting and disconecting the cluster every 5 minutes and it give a lot of useless traffic.

The led on the Spot source status shows yellow.

I have no idea whats wrong.

Some info:
on0dxk.dyndns.org
port 8000

73 Koen
ON7RK


Re: LoTW Mass Download

Chuck Green
 

Thanks Dave and John. I am saving all day Monday for fun stuff and this is
at the top of the list. It is presidents day, a day off from work, and a
good day to kill this polyheaded monster once and for all and start enjoying
the functionality of the suite.

73's
Chuck

-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com] On Behalf Of Dave
AA6YQ
Sent: Sunday, January 16, 2011 12:06 AM
To: dxlab@yahoogroups.com
Subject: RE: [dxlab] LoTW Mass Download




AA6YQ comments below
-----Original Message-----
From: dxlab@yahoogroups.com <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@yahoogroups.com <mailto:dxlab%40yahoogroups.com> ]On Behalf Of
John KLim
Sent: Saturday, January 15, 2011 11:43 PM
To: dxlab@yahoogroups.com <mailto:dxlab%40yahoogroups.com> ; 'Chuck'
Subject: RE: [dxlab] LoTW Mass Download

Chuck,

For the first problem:

1. Download the ADIF data into a file to your local hard disk.
2. Edit the file
3. Substitute for the entire file
Old string <QSL_RCVD:1>Y
New string <QSL_RCVD:1>N <QSL_SENT:1>N <LOTW_QSL_SENT:1>Y
<LOTW_QSL_RCVD:1>Y
4. Save the file.
5, Import the file.

Using DXKeeper's Advanced window's "Modify QSOs" panel is less
error-prone than editing ADIF with a text editor.

Fir ADIF specifications see www.ADIF.ORG.

I hope this helps.

BTW, on the "TO" prefix, when resolved I would also like the fix.

DXLab has for many years provided an override mechanism to deal with
ambiguous and "non-standard" callsigns. See

<http://www.dxlabsuite.com/dxview/Help/Configuration.htm#Entity Overides>

73,

Dave, AA6YQ

Version: 10.0.1191 / Virus Database: 1435/3382 - Release Date: 01/15/11


Re: moving to a new desktop

Richard B Drake
 

Detailed step by step instructions for moving DXLab from one PC to another are provided at:

http://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs

Instructions for moving LoTW to another PC are provided at:

http://www.dxlabsuite.com/dxlabwiki/LotWMoveToAnotherPC

73, Rich - W3ZJ



WW3S wrote:

I'm moving to a new desktop running Win7, I have all the new applications
installed, and copied my log and the log page display config file
over....I'd like to move my DXCC and LOTW stuff over next, what do I need to
move over so my DXCC records are the same as on the old PC, and what do I
need to move so the automagic LOWT upload/sync works?




------------------------------------

Yahoo! Groups Links






moving to a new desktop

Jamie WW3S
 

I'm moving to a new desktop running Win7, I have all the new applications installed, and copied my log and the log page display config file over....I'd like to move my DXCC and LOTW stuff over next, what do I need to move over so my DXCC records are the same as on the old PC, and what do I need to move so the automagic LOWT upload/sync works?

111881 - 111900 of 200117