Date   
Re: Download DXCC QSL List

Stan Gammons
 

On 4/5/19 10:55 PM, Dave AA6YQ wrote:


+ Note that QSL card confirmations to which DXCC Credit has been granted will not be reported by LoTW.

Is that because another system/method is used to process cards?   I think doing it that way is a bit of a pain.  But, it is what it is I suppose.


73

Stan
KM4HQE

Re: Download DXCC QSL List

Dave AA6YQ
 

* There's a faster way to accomplish your objective than what's described below:

1. follow the procedure given in

<https://groups.io/g/DXLab/message/184862>

2. in the "DXCC, Challenge, & Toplist" panel on the Main window's "Check Progress" tab, click the "Compare" button; this will display a report listing discrepancies between the DXCC Credit shown in your ARRL DXCC Record, and the DXCC Credit shown in DXKeeper.

3. for each QSO that the discrepancy report shows as having been granted DXCC Credit to an LoTW confirmation,

a. locate the QSO in the Log Page Display

b. right-click, and select "Update from LoTW" from the pop-up menu

73,

Dave, AA6YQ


+ AA6YQ comments below

Those are the instructions I was working from.

The reason for this exercise is that my LOTW account says I have 4 more DXCC credits than DXK does. I would like to identify the discrepancies in a relatively efficient manner.

+ That can be accomplished by depressing the CTRL key while clicking the "Sync LoTW QSLs" button. DXKeeper will direct LoTW to report all of your QSOs that are confirmed via LoTW, identifying those to which DXCC Credit has been granted. DXKeeper will then review that report, and update your logged QSOs to reflect LoTW confirmation and DXCC Credit granted to LoTW confirmations.

+ With a large number of QSOs confirmed in LoTW, the above procedure can take a long while. If the words "not responding" appear in the title bar of DXKeeper's Main window, ignore them; that's Windows speak for "waiting for LoTW to assemble and download the requested report".

+ Note that QSL card confirmations to which DXCC Credit has been granted will not be reported by LoTW.

73,

Dave, AA6YQ






---
This email has been checked for viruses by AVG.
https://www.avg.com

Re: Download DXCC QSL List

Dave AA6YQ
 

+ AA6YQ comments below

Those are the instructions I was working from.

The reason for this exercise is that my LOTW account says I have 4 more DXCC credits than DXK does. I would like to identify the discrepancies in a relatively efficient manner.

+ That can be accomplished by depressing the CTRL key while clicking the "Sync LoTW QSLs" button. DXKeeper will direct LoTW to report all of your QSOs that are confirmed via LoTW, identifying those to which DXCC Credit has been granted. DXKeeper will then review that report, and update your logged QSOs to reflect LoTW confirmation and DXCC Credit granted to LoTW confirmations.

+ With a large number of QSOs confirmed in LoTW, the above procedure can take a long while. If the words "not responding" appear in the title bar of DXKeeper's Main window, ignore them; that's Windows speak for "waiting for LoTW to assemble and download the requested report".

+ Note that QSL card confirmations to which DXCC Credit has been granted will not be reported by LoTW.

73,

Dave, AA6YQ

Re: UDP address on WSJT-X panel on the Configuration window's Spot Sources

Carl - WC4H
 

When I click on the check box to "Enable" the UDP for WSJt-X I get this:
Cannot connect to WSJTX via UDP address 192.168.3.102 port 2237 because address is not available from local machine.

So I can go no further in testing.  I have opened port 2237 on the other PC, I can ping from either PC to the other, I even forwarded the port on the router which should not be necessary for the internal network.

So, I guess that ends that unless the Check Box let's me enable it.

73.
Carl - WC4H

Re: Download DXCC QSL List

Pete Smith
 

Those are the instructions I was working from.

The reason for this exercise is that my LOTW account says I have 4 more DXCC credits than DXK does.  I would like to identify the discrepancies in a relatively efficient manner.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 4/5/2019 5:59 PM, Dave AA6YQ wrote:

+ Is your objective to download your DXCC credits from the ARRL and have DXKeeper update your log to reflect "award credit granted"? If so, downloading your DXCC QSL report from LOTW is not a part of the procedure. The instructions are here:

<https://www.dxlabsuite.com/dxlabwiki/ManageDXCCCredits>

+ If you have a different objective, please state it.

     73,

          Dave, AA6YQ

 

On Fri, Apr 5, 2019 at 01:39 PM, Pete Smith wrote:

I downloaded my DXCC QSL report from LOTW.  Once I had done that, I attempted to run the Analyze routine, but then thought "dummy, you need to put that download where DXK can find it."  Rather than guess at where that might be, I used the download button on the DXCC Credits window to re-download the report.  After chugging for a while, it announced that I have zero DXCC credits.  I know that's not correct, because I have a 254k ADIF file in my Downloads folder.  What's the problem?  Did LOTW refuse to send my credits a second time?  If so, should I write them and ask that they reset my account?

Re: Commander and Ftdx3000

Dave AA6YQ
 

+ AA6YQ comments below

On Fri, Apr 5, 2019 at 01:50 PM, mitchhunt7 wrote:

Thank you Dave! That gives me a starting point
+ Please post your results here. Thanks!

      73,

            Dave, AA6YQ

Re: Download DXCC QSL List

Dave AA6YQ
 

+ Is your objective to download your DXCC credits from the ARRL and have DXKeeper update your log to reflect "award credit granted"? If so, downloading your DXCC QSL report from LOTW is not a part of the procedure. The instructions are here:

<https://www.dxlabsuite.com/dxlabwiki/ManageDXCCCredits>

+ If you have a different objective, please state it.

     73,

          Dave, AA6YQ

 

On Fri, Apr 5, 2019 at 01:39 PM, Pete Smith wrote:

I downloaded my DXCC QSL report from LOTW.  Once I had done that, I attempted to run the Analyze routine, but then thought "dummy, you need to put that download where DXK can find it."  Rather than guess at where that might be, I used the download button on the DXCC Credits window to re-download the report.  After chugging for a while, it announced that I have zero DXCC credits.  I know that's not correct, because I have a 254k ADIF file in my Downloads folder.  What's the problem?  Did LOTW refuse to send my credits a second time?  If so, should I write them and ask that they reset my account?

Re: Commander and Ftdx3000

mitchhunt7 <mitchhunt7@...>
 

Thank you Dave! That gives me a starting point



Sent from my U.S.Cellular© Smartphone

-------- Original message --------
From: Dave AA6YQ <aa6yq@...>
Date: 4/5/19 3:31 PM (GMT-06:00)
To: DXLab@groups.io
Subject: Re: [DXLab] Commander and Ftdx3000

+ AA6YQ comments below

On Fri, Apr 5, 2019 at 01:24 PM, mitchhunt7 wrote:

Hi I am currently running DXLab suite with my Yeasu ftdx3000. I was wondering if there is a way to configure the commander to power the radio on and off.

+ The FTDX3000 CAT manual describes a pair of commands to turn the radio off and on, respectively:

PS0;

PS1;

+ However, the description accompanying the commands is cryptic:

"This command requires dummy data be initially sent. Then after one second and before two seconds, the command is sent".

+ Unless someone here has determined how to make these commands work correctly, my advice is to ask Yaesu Technical Support for an explanation.

+ Then you can employ a User-defined Command Sequence to issue the appropriate commands to your FTDX3000:

<http://www.dxlabsuite.com/commander/Help/CommandSequences.htm>

       73,

           Dave, AA6YQ

 

 

 

 

Download DXCC QSL List

Pete Smith
 

I downloaded my DXCC QSL report from LOTW.  Once I had done that, I attempted to run the Analyze routine, but then thought "dummy, you need to put that download where DXK can find it."  Rather than guess at where that might be, I used the download button on the DXCC Credits window to re-download the report.  After chugging for a while, it announced that I have zero DXCC credits.  I know that's not correct, because I have a 254k ADIF file in my Downloads folder.  What's the problem?  Did LOTW refuse to send my credits a second time?  If so, should I write them and ask that they reset my account?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Determining Your DXCC account number

Kent N6WT
 

Looks good!

Thanks
73
Kent
N6WT


On Fri, Apr 5, 2019 at 1:20 PM Dave AA6YQ <aa6yq@...> wrote:

+ AA6YQ comment sbelow

On Fri, Apr 5, 2019 at 01:02 PM, Kent Olsen wrote:

When I went thru this I felt it was misleading. I misread the wiki and thought that everything after the = was the password. Maybe you could make a mention that it is only the first number.

+ Is this better?

<https://www.dxlabsuite.com/dxlabwiki/DetermineDXCCAccountNumber>

+ If not, please suggest an improvement.

       73,

              Dave, AA6YQ

 

 

Re: Commander and Ftdx3000

Dave AA6YQ
 

+ AA6YQ comments below

On Fri, Apr 5, 2019 at 01:24 PM, mitchhunt7 wrote:

Hi I am currently running DXLab suite with my Yeasu ftdx3000. I was wondering if there is a way to configure the commander to power the radio on and off.

+ The FTDX3000 CAT manual describes a pair of commands to turn the radio off and on, respectively:

PS0;

PS1;

+ However, the description accompanying the commands is cryptic:

"This command requires dummy data be initially sent. Then after one second and before two seconds, the command is sent".

+ Unless someone here has determined how to make these commands work correctly, my advice is to ask Yaesu Technical Support for an explanation.

+ Then you can employ a User-defined Command Sequence to issue the appropriate commands to your FTDX3000:

<http://www.dxlabsuite.com/commander/Help/CommandSequences.htm>

       73,

           Dave, AA6YQ

 

 

 

 

Commander and Ftdx3000

mitchhunt7@...
 

Hi I am currently running DXLab suite with my Yeasu ftdx3000. I was wondering if there is a way to configure the commander to power the radio on and off. Thanks! 
Mitch 
KE0UAS 



Sent from my U.S.Cellular© Smartphone

Re: Determining Your DXCC account number

Dave AA6YQ
 

+ AA6YQ comment sbelow

On Fri, Apr 5, 2019 at 01:02 PM, Kent Olsen wrote:

When I went thru this I felt it was misleading. I misread the wiki and thought that everything after the = was the password. Maybe you could make a mention that it is only the first number.

+ Is this better?

<https://www.dxlabsuite.com/dxlabwiki/DetermineDXCCAccountNumber>

+ If not, please suggest an improvement.

       73,

              Dave, AA6YQ

 

 

Re: Determining Your DXCC account number

Kent N6WT
 

Dave

When I went thru this I felt it was misleading. I misread the wiki and thought that everything after the = was the password. Maybe you could make a mention that it is only the first number.

Thanks
73
Kent
N6WT


On Fri, Apr 5, 2019 at 12:39 PM Pete Smith <n4zr@...> wrote:

I guess that counts as an early account(?). Thanks, Dave.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 4/5/2019 3:33 PM, Dave AA6YQ wrote:
+ AA6YQ comments below

I have just tried to follow the instructions in the above-titled Help page, but instead of yielding an account number, clicking on View Award Credit Matrix produces the matrix requested, but the URL reads "/lotw.arrl.org/lotwuser/awardaccount?awardaccountcmd=status&awg_id=DXCC&ac_acct=1&bingo=1#list"  .  Everything after the ampersand is different.

+ As indicated by

ac_acct=1

+ your DXCC account number is 1

Any ideas what's wrong? 

+ There is nothing wrong. The

bingo=1#list

+ is just another parameter the ARRL added to the URL.

          73,

                 Dave, AA6YQ





Re: Determining Your DXCC account number

Pete Smith
 

I guess that counts as an early account(?). Thanks, Dave.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 4/5/2019 3:33 PM, Dave AA6YQ wrote:

+ AA6YQ comments below

I have just tried to follow the instructions in the above-titled Help page, but instead of yielding an account number, clicking on View Award Credit Matrix produces the matrix requested, but the URL reads "/lotw.arrl.org/lotwuser/awardaccount?awardaccountcmd=status&awg_id=DXCC&ac_acct=1&bingo=1#list"  .  Everything after the ampersand is different.

+ As indicated by

ac_acct=1

+ your DXCC account number is 1

Any ideas what's wrong? 

+ There is nothing wrong. The

bingo=1#list

+ is just another parameter the ARRL added to the URL.

          73,

                 Dave, AA6YQ





Re: Determining Your DXCC account number

Dave AA6YQ
 

+ AA6YQ comments below

I have just tried to follow the instructions in the above-titled Help page, but instead of yielding an account number, clicking on View Award Credit Matrix produces the matrix requested, but the URL reads "/lotw.arrl.org/lotwuser/awardaccount?awardaccountcmd=status&awg_id=DXCC&ac_acct=1&bingo=1#list" . Everything after the ampersand is different.

+ As indicated by

ac_acct=1

+ your DXCC account number is 1

Any ideas what's wrong?

+ There is nothing wrong. The

bingo=1#list

+ is just another parameter the ARRL added to the URL.

73,

Dave, AA6YQ

Determining Your DXCC account number

Pete Smith
 

I have just tried to follow the instructions in the above-titled Help page, but instead of yielding an account number, clicking on View Award Credit Matrix produces the matrix requested, but the URL reads "/lotw.arrl.org/lotwuser/awardaccount?awardaccountcmd=status&awg_id=DXCC&ac_acct=1&bingo=1#list"  .  Everything after the ampersand is different.

Any ideas what's wrong?  Might this be related to my having been a very early beta (or maybe alpha) user of LOTW who hasn't applied for DXCC credit since 1993?  Do I need to write to the ARRL?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: DXCC progress report suggestion

Dave AA6YQ
 

+ AA6YQ comments below

I don't know if others would agree with me on this, but the prefix portion of the DXCC Progress Report would be much easier to read if the sort was "prefixes within active entities" followed by "prefixes within deleted countries".

+ ARRL progress reports -- like the "DXCC Award Credit Report" in LoTW, and the "Award Credit Matrix" view of your DXCC Record are sorted by prefix alone, with no special section for now-deleted countries".

73,

Dave, AA6YQ

DXCC progress report suggestion

Bill - AA4M
 

Hello Dave - AA6YQ,

I don't know if others would agree with me on this, but the prefix portion of the DXCC Progress Report would be much easier to read if the sort was "prefixes within active entities" followed by "prefixes within deleted countries".

Thank, Bill - AA4M

Re: UDP address on WSJT-X panel on the Configuration window's Spot Sources

Carl - WC4H
 

Thanks Dave.

I'll play with it some more.  Will report back if I have any luck.

73.
Carl - WC4H