Date   

Re: Pathfinder - QRZ Down

Dave AA6YQ
 

+ AA6YQ comments below

I’ve been having trouble with Pathfinder all morning – they must be having a problem

+ Pathfinder has been working correctly. QRZ.com now appears to be available.

+ Note that when QRZ.com is unavailable, Pathfinder can still access other sources of QSL information.

73,

Dave, AA6YQ

Glenn Van Benschoten
gtvanben@...

From: DXLab@groups.io [mailto:DXLab@groups.io] On Behalf Of Bob WB2NVR
Sent: Saturday, March 14, 2020 11:20 AM
To: DXLab@groups.io
Subject: [DXLab] Pathfinder - QRZ Down

Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.

According to https://www.isitdownrightnow.com/qrz.com.html QRZ is down.

Anyone have any info about this?

73,

Bob WB2NVR


Re: QRZ Seems to be down

Don Murray
 

QRZ is up for me...

73
Don
W4WJ




On Saturday, March 14, 2020 Bob WB2NVR <DXLab@groups.io> wrote:

Looks like it just came back up.

73,
Bob WB2NVR


Re: QRZ Seems to be down

Mike Flowers
 

Installed new turbo-encabulator … ;>)

 

https://www.youtube.com/watch?v=MXW0bx_Ooq4

 

- 73 and good DX de Mike, K6MKF, NCDXC Secretary

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Bob WB2NVR
Sent: Saturday, March 14, 2020 09:25
To: DXLab@groups.io
Subject: Re: [DXLab] QRZ Seems to be down

 

Looks like it just came back up.

73,
Bob WB2NVR


Re: QRZ Seems to be down

Bob WB2NVR
 

Looks like it just came back up.

73,
Bob WB2NVR


Re: QRZ Seems to be down

Bob WB2NVR
 

You can check if the problem is yours, or if the site is down for everyone here:

https://www.isitdownrightnow.com/qrz.com.html

73,

Bob WB2NVR


Re: QRZ Seems to be down

Gilbert Baron W0MN
 

Maybe it is time to find another source but then is there any with the amount of data they have. This is the problem with a one source solution. It would be neat if PF cold automatically go to a second source. 😊

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Hasan Schiers N0AN
Sent: Saturday, March 14, 2020 11:05
To: DXLab@groups.io
Subject: Re: [DXLab] QRZ Seems to be down

 

Gil,

It's been up and down a lot lately. Yesterday it had other issues. There also have been some network issues that prevented users from even getting to the main page.

73, N0AN

Hasan

 

 

On Sat, Mar 14, 2020 at 11:03 AM Gilbert Baron W0MN <w0mn00@...> wrote:

Anyone else having trouble with PF and QRZ. This is what I get trying to reach QRZ on Web

 

Hmmm… can't reach this page

www.qrz.com took too long to respond

Try:

  • Checking the connection
  • Checking the proxy and the firewall
  • Running Windows Network Diagnostics

ERR_CONNECTION_TIMED_O

 

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Re: Pathfinder - QRZ Down

Gilbert Baron W0MN
 

XML not working here. Pathfinder times out direct log to website times out. QRZ has been havi8ng a lot of reliability problems lately.

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Mike Flowers
Sent: Saturday, March 14, 2020 10:24
To: DXLab@groups.io
Subject: Re: [DXLab] Pathfinder - QRZ Down

 

QRZCOM web server appears down here.   XML API is still working …

 

- 73 and good DX de Mike, K6MKF, NCDXC Secretary

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Bob WB2NVR
Sent: Saturday, March 14, 2020 08:20
To: DXLab@groups.io
Subject: [DXLab] Pathfinder - QRZ Down

 

Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.  

According to https://www.isitdownrightnow.com/qrz.com.html    QRZ is down.

Anyone have any info about this?

73,

Bob WB2NVR


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Re: Two Monitor Solution

Bill <ko4nrbs@...>
 

Got it set up at least on two screens.  Haven't got HDSDR set up yet.  That will be my next project.  Thanks to all!!
73,
Bill

On Saturday, March 14, 2020, 10:22:01 AM CDT, Joe Subich, W4TV <lists@...> wrote:



On 2020-03-14 10:10 AM, Bill via Groups.Io wrote:
> When using Extend all I get on the larger screen is the Task Bar.
> The smaller screen's Task bar is there but too low to see.73,Bill
> KO4NR
You may need to use PC Settings -> System -> Display to set the
proper (native) display resolution for each display.  If the
resolution is set incorrectly some of the display area may be lost
(off the bottom/right side of the display).

> Was want to run HDSDR on the larger one and everything else on the
> smaller one.

Given the amount of information in DXKeeper, CI-V Commander, WSJT-X
and JTAlert, you may be better served to run them on the larger screen
and dedicate the smaller screen to HDSDR.


73,

    ... Joe, W4TV


On 2020-03-14 10:10 AM, Bill via Groups.Io wrote:
>  When using Extend all I get on the larger screen is the Task Bar.  The smaller screen's Task bar is there but too low to see.73,Bill KO4NR
>      On Saturday, March 14, 2020, 09:02:39 AM CDT, Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:

>    Yes I have two monitors now.  Was want to run HDSDR on the larger one and everything else on the smaller one.  73,Bill KO4NR
>      On Saturday, March 14, 2020, 09:00:46 AM CDT, Dave Fugleberg <davefugleberg@...> wrote:

>  Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.73 de W0ZF
> On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
>
> Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?
> Please excuse my ignorance!!
> 73,Bill KO4NR
>
>
>
>
>
>
>
>
>




Re: QRZ Seems to be down

Hasan Schiers N0AN
 

Gil,
It's been up and down a lot lately. Yesterday it had other issues. There also have been some network issues that prevented users from even getting to the main page.
73, N0AN
Hasan


On Sat, Mar 14, 2020 at 11:03 AM Gilbert Baron W0MN <w0mn00@...> wrote:

Anyone else having trouble with PF and QRZ. This is what I get trying to reach QRZ on Web

 

Hmmm… can't reach this page

www.qrz.com took too long to respond

Try:

  • Checking the connection
  • Checking the proxy and the firewall
  • Running Windows Network Diagnostics

ERR_CONNECTION_TIMED_O

 

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


QRZ Seems to be down

Gilbert Baron W0MN
 

Anyone else having trouble with PF and QRZ. This is what I get trying to reach QRZ on Web

 

Hmmm… can't reach this page

www.qrz.com took too long to respond

Try:

ERR_CONNECTION_TIMED_O

 

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Re: Pathfinder - QRZ Down

Glenn Van Benschoten
 

I’ve been having trouble with Pathfinder all morning – they must be having a problem

 

Glenn Van Benschoten

gtvanben@...

 

From: DXLab@groups.io [mailto:DXLab@groups.io] On Behalf Of Bob WB2NVR
Sent: Saturday, March 14, 2020 11:20 AM
To: DXLab@groups.io
Subject: [DXLab] Pathfinder - QRZ Down

 

Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.  

According to https://www.isitdownrightnow.com/qrz.com.html    QRZ is down.

Anyone have any info about this?

73,

Bob WB2NVR


Re: Pathfinder - QRZ Down

Mike Flowers
 

QRZCOM web server appears down here.   XML API is still working …

 

- 73 and good DX de Mike, K6MKF, NCDXC Secretary

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Bob WB2NVR
Sent: Saturday, March 14, 2020 08:20
To: DXLab@groups.io
Subject: [DXLab] Pathfinder - QRZ Down

 

Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.  

According to https://www.isitdownrightnow.com/qrz.com.html    QRZ is down.

Anyone have any info about this?

73,

Bob WB2NVR


Re: Two Monitor Solution

Joe Subich, W4TV
 

On 2020-03-14 10:10 AM, Bill via Groups.Io wrote:
When using Extend all I get on the larger screen is the Task Bar.
The smaller screen's Task bar is there but too low to see.73,Bill
KO4NR
You may need to use PC Settings -> System -> Display to set the
proper (native) display resolution for each display. If the
resolution is set incorrectly some of the display area may be lost
(off the bottom/right side of the display).

Was want to run HDSDR on the larger one and everything else on the smaller one.
Given the amount of information in DXKeeper, CI-V Commander, WSJT-X
and JTAlert, you may be better served to run them on the larger screen
and dedicate the smaller screen to HDSDR.


73,

... Joe, W4TV


On 2020-03-14 10:10 AM, Bill via Groups.Io wrote:
When using Extend all I get on the larger screen is the Task Bar.  The smaller screen's Task bar is there but too low to see.73,Bill KO4NR
On Saturday, March 14, 2020, 09:02:39 AM CDT, Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Yes I have two monitors now.  Was want to run HDSDR on the larger one and everything else on the smaller one.  73,Bill KO4NR
On Saturday, March 14, 2020, 09:00:46 AM CDT, Dave Fugleberg <davefugleberg@...> wrote:
Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.73 de W0ZF
On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?
Please excuse my ignorance!!
73,Bill KO4NR


Pathfinder - QRZ Down

Bob WB2NVR
 

Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.  

According to https://www.isitdownrightnow.com/qrz.com.html    QRZ is down.

Anyone have any info about this?

73,

Bob WB2NVR


Re: Two Monitor Solution

neil_zampella
 

Bill ...

you have to manually drag the windows you want over to the extended monitor.     If you're moving any DXLab application, first set the use multiple monitors checkbox in their configuration screen.

As far as the toolbar being too low, you may want to have Windows verify the display resolution by opening up the Display Settings from the Control Panel, and clicking on the DETECT button.  This 'should' adjust the monitor for that correct resolution.      If you have two monitors of different resolutions this has to be done.

Neil, KN3ILZ

On 3/14/2020 10:10 AM, Bill via Groups.Io wrote:
When using Extend all I get on the larger screen is the Task Bar.  The smaller screen's Task bar is there but too low to see.
73,
Bill KO4NR

On Saturday, March 14, 2020, 09:02:39 AM CDT, Bill via Groups.Io <ko4nrbs@...> wrote:


Yes I have two monitors now.  Was want to run HDSDR on the larger one and everything else on the smaller one.  
73,
Bill KO4NR

On Saturday, March 14, 2020, 09:00:46 AM CDT, Dave Fugleberg <davefugleberg@...> wrote:


Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.
73 de W0ZF 

On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?

Please excuse my ignorance!!

73,
Bill KO4NR

Virus-free. www.avg.com


Re: Two Monitor Solution

Dave AA6YQ
 

+ AA6YQ comments beloew

I have two monitors set up now with all the software appearing identically on both of them (Duplicate). Maybe use Extend or ?? and then drag everything but HDSDR over to the 2nd monitor?

+ See

< https://support.microsoft.com/en-us/help/4340331/windows-10-set-up-dual-monitors>


Will DXCommander/Keeper and HDSDR need to have separate com ports?

+ Only one physical COM port is required for Commander to interact with your transceiver. See

<https://www.dxlabsuite.com/dxlabwiki/HDSDRCWSkimmerConfiguration>

73,

Dave, AA6YQ


Re: Two Monitor Solution

Bill <ko4nrbs@...>
 

When using Extend all I get on the larger screen is the Task Bar.  The smaller screen's Task bar is there but too low to see.
73,
Bill KO4NR

On Saturday, March 14, 2020, 09:02:39 AM CDT, Bill via Groups.Io <ko4nrbs@...> wrote:


Yes I have two monitors now.  Was want to run HDSDR on the larger one and everything else on the smaller one.  
73,
Bill KO4NR

On Saturday, March 14, 2020, 09:00:46 AM CDT, Dave Fugleberg <davefugleberg@...> wrote:


Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.
73 de W0ZF 

On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?

Please excuse my ignorance!!

73,
Bill KO4NR


Re: Two Monitor Solution

Bill <ko4nrbs@...>
 

Yes I have two monitors now.  Was want to run HDSDR on the larger one and everything else on the smaller one.  
73,
Bill KO4NR

On Saturday, March 14, 2020, 09:00:46 AM CDT, Dave Fugleberg <davefugleberg@...> wrote:


Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.
73 de W0ZF 

On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?

Please excuse my ignorance!!

73,
Bill KO4NR


Re: Two Monitor Solution

Dave Fugleberg
 

Ah saw your clarification after I sent my first reply. Extend is the correct option in Windows to do what you want.

On Sat, Mar 14, 2020 at 8:57 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
I have two monitors set up now with all the software appearing identically on both of them (Duplicate).  Maybe use Extend or ?? and then drag everything but HDSDR over to the 2nd monitor?

Will DXCommander/Keeper and HDSDR need to have separate com ports?

Wondering about com port conflicts.

Thanks Dave!!

73,

Bill KO4NR

On Saturday, March 14, 2020, 08:41:11 AM CDT, Dave AA6YQ <aa6yq@...> wrote:


+ AA6YQ comments below

Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?

+ Every DXLab application provides a "Use multiple monitors" option on its Configuration window's General tab. Enable this option, and DXLab application windows dragged to a secondary monitor and terminated will re-appear on that secondary monitor when they are next started.


      73,


              Dave, AA6YQ





Re: Two Monitor Solution

Dave Fugleberg
 

Do you have 2 monitors on your PC now, Bill? Wasn't sure if your question was only about those specific programs, or if you needed to know how to make 2 monitors work on one PC.
73 de W0ZF 

On Sat, Mar 14, 2020 at 8:33 AM Bill via Groups.Io <ko4nrbs=yahoo.com@groups.io> wrote:
Is it possible, using the same computer, to run WSJT-X, DXCommander/Keeper and JTALERT on one monitor and HDSDR on a second monitor?

Please excuse my ignorance!!

73,
Bill KO4NR