SpotCollector is showing 6W1TA as a needed Marathon country. I worked 6W1TA on 1/26/2020 on 20meter CW. When I right click on the spot and select Display Award Tracking for 6W1TA it shows under

Mike, Typically you can allow DXLab Suite (Commander/WinWarbler) to use the USB Interface for frequency control, Sound Card (WinWarbler) and "Panadapter" while the SteppIR controller and Expert 2K

Hi Dave, That worked perfectly for my needs. Here’s what I did with this: I now use F12 macro to: turn on Dual Watch FEFE98E007C1FD turn on Split FEFE98E00F01FD select VFO B

Dave - My WSJT-X will not connect to the sound card if I don't use the USB line.

Yes, the Spot on ... and Spot <callsign> on ... and Spot <callsign> on ... with notes are greyed out. - 73 and good DX de Mike, K6MKF, NCDXC Secretary

Thanks for that tip Carl. I'll give it a try. 73, Dale AA1QD

Presumably the "Spot ... on ... in ..." context menu entries. 73, ~iain / N6ML

This is going in a lot of groups. It even showed up in the IBM group. I have no idea if it is a scam or not but it is certainly out of place. Outlook Laptop Gil W0MN Hierro candente, batir de

+ AA6YQ comments below I've noticed recently that DXKeeper will lose contact with SpotCollector and when I right-click on a recent log entry to spot it, my spotting options are grayed out. + What

Thanks, dave, That worked perfectly. Now when I hit Commander F12 I can log QSOs in VFO B. Commander Shift F12 brings me back to logging in VFO A. Just like I does in N1MM Logger+ contests.

Hi Folks, I’ve noticed recently that DXKeeper will lose contact with SpotCollector and when I right-click on a recent log entry to spot it, my spotting options are grayed out. SpotCollector is

...via the Databases tab on DXView's Configuration window. 73, Dave, AA6YQ

+ AA6YQ comments below I told you I'd get back to the group on how this worked out - kudos to Joe W4TV for his deep expertise on interfacing these kinds of devices and he filled in knowledge gaps I

The sender was unmoderated after posting a "Hello" message last week; I should have noticed that this message contained no amateur radio content and left the user moderated. 73,

+ AA6YQ comments below Several years ago when I got my IC-7851, I connected my computer running DXLab to a CT-17 via a serial port on the computer, and then connected the CT-17 to the IC-7851, a

+ AA6YQ comments below I'm trying to create a CIV command set for SO2V use. I have the DualWatch and Split. I just need to select the VFO. The only VFO select command I can find is 29 00 and 29

I told you I’d get back to the group on how this worked out – kudos to Joe W4TV for his deep expertise on interfacing these kinds of devices and he filled in knowledge gaps I had from my limited

Several years ago when I got my IC-7851, I connected my computer running DXLab to a CT-17 via a serial port on the computer, and then connected the CT-17 to the IC-7851, a SteppIR Controller for the

I’m trying to create a CIV command set for SO2V use. I have the DualWatch and Split. I just need to select the VFO. The only VFO select command I can find is 29 00 and 29 01but it has to be used

Hi Dale. What I do is the following: I have a file that sets certain initial values when I launch Commander. Regardless what they are, I have 4 power level buttons and 1 power slider defined. The