Dave, Copied the DefaultBands from the web and pasted it into a new text file "DefaultBands.text" then placed that into the DXKeeper/Database - C:\Program Files (x86)\DXKeeper\Databases DxKeeper still

The logic has nothing to do with licensing rules. It comes about because the ten US call areas are used as geographic multipliers in their contests. If they did not have such a rule in effect, someone

Dave, My guess is that the sensitivity of some mouse scroll wheels is such that barely touching it causes the frequency to shift. I use the scroll feature constantly and have the mouse set so as not

BARTG sponsors contests in particular. Those Brits still think they have the right to override US rules. After almost 250 years they still have not learned! 73, ... Joe, W4TV

+ AA6YQ comments below Have used Commander over the years for three different Icom radios - R75, IC-7600, and now the R8600. Excellent software! Is there a way in Commander to lock the frequency?

Have used Commander over the years for three different Icom radios - R75, IC-7600, and now the R8600. Excellent software! Is there a way in Commander to lock the frequency? Often I find the tuned

+ AA6YQ comments below I recently uploaded my IOTA QSOs from DxKeeper to the IOTA website, that went fine and all QSOs were approved for credit. Today I downloaded the .csv file with the approved

+ AA6YQ comments below Additional info: where is the DXKeeper log page display configuration supposed to be saved? + You can configure DXKeeper to save it wherever you like. I think that the

Additional info: where is the DXKeeper log page display configuration supposed to be saved? I think that the location somehow became C:\Program Files (x86)\DXKeeper\Databases\DefaultBands.txt and

Which contests are these? If your address with the FCC is in Texas and you are operating from that QTH, the /5 is not required by FCC and not for major contests. Just curious. 73. Carl - WC4H

I'm seeing 1, 4, 118, 8 etc. Have I misconfigured?

I recently uploaded my IOTA QSOs from DxKeeper to the IOTA website, that went fine and all QSOs were approved for credit. Today I downloaded the .csv file with the approved QSOs from the

+ AA6YQ comments below Thanks for the quick response, sorry to miss seeing you at Visalia, dang virus. + That was a more tractable virus, as viruses go... I rebooted WIndows into Safe Mode with

Hi Dave, Thanks for the quick response, sorry to miss seeing you at Visalia, dang virus. I rebooted WIndows into Safe Mode with networking. Then started Launcher and clicked on SpotCollector.

OK Dave, thanks. As I keep eliminating things, I'll finally get to the problem....

+ AA6YQ comments below The motherboard on my HP ProDesk 600 G3 computer recently had to be replaced because of flaky USB ports. Now when I start DXLab (through Launcher) all modules come up except

+ AA6YQ comments below Great! Making progress... Totally redid ground system -- bigger and shorter wires. Also set all the USB ports to not power down. Added ferrite choke at each end of USB

The motherboard on my HP ProDesk 600 G3 computer recently had to be replaced because of flaky USB ports. Now when I start DXLab (through Launcher) all modules come up except SpotCollector which gives

Thanks for the replies to this. The rig will arrive this week and looking forward to the spots showing up on the pan adapter.  It worked great on my previous 6600 until the update from Flex changed

Same here, also with a 6600. Works like a champ! 73 Paul w2eck