Many thanks to all who have posted comments so far. Salvatore I4FYV, DXLab applications collectively store hundreds of settings in the Windows Registry. Moving three of DXKeeper's settings from the

+ AA6YQ comments below I've been thru that article step by step 3 times (doing the settings each time). As soon as I uncheck Enable WSJT-X as a spotter source, the LED spot source shows RED. Here

Dave, I've been thru that article step by step 3 times (doing the settings each time). As soon as I uncheck Enable WSJT-X as a spotter source, the LED spot source shows RED. Here are the settings I'm

That is only true for the traditional "high tones" (2125/2295 Hz). For European "Low Tones" the corresponding offsets would be 1275 and 1360Hz. For rigs that support the "1 KHz standard" (915/1075

The WinWarbler setup instructions indicate that when using FSK for RTTY operation, an offset of -2125 Hz should be entered in the LSB row, and the "Optimal Offset" should be set to 2210 Hz. I would

+ AA6YQ comments below + Welcome to DXLab, Jerry. All questions are welcome here, no matter how many times they may have already been asked or answered, or how obvious the answers might be in the

+ AA6YQ comments below + Pathfinder automatically logs in to QRZ.com here, and no one else has reported a problem. Please post the full "something with QRZ might be outdated" message. Thanks!

+ AA6YQ comments below + As a first diagnostic step, reboot Windows into "safe mode with networking", start the Launcher, and then direct the Launcher to start SpotCollector. Any difference in

Short of an RTFM response,.. This year I have transitioned to DXLab and have imported my logs from HRD. I am noticing that some entries that are in my log do not seem to be displayed under RAT or

Unable to  log into QRZ.com using Pathfinder 5.2.6, checked both user name and password. Pop up window say unable to find User name and Password.  Both are there when using pathfinder

I do not understand this response. I would want that ability for one reason. I frequently use a club call to make contacts coincidentally with my own call in the same session. Having the ability to

I upgraded a computer from Win7 to Win10 over this past weekend. I only run Spotcollecter, DXView, Map and DXKeeper on this machine. Under Win7 everything ran well. Under Win10 I am seeing a delay

I like this proposal. It seems another benefit might be for QSL managers when a log that is being managed loads the matching station, operator and owner detail. 73, Ken - WO1N

Sounds great. I vote yes. Steve Ws5w -- Steve WS5W

The only problem I cam see is that instead of a small workspace to change my mode of operation is that I would need multiple logs and each would have the same thing or much the same except for the

Good morning Dave, I agree that that is one of the areas that people have to remember to change things when logging from a different location, etc. But it adds the advantage of having the data

Dave,     Sounds like a great idea to me!  I sometimes use 2 calls on the same computer, this would make it easier to do. Thanks! Gordon - N1MGO

hello Dave, None, it is a very good idea to make a log even more independent from the host operating system. Store more and more settings in the database, apart those that are really common settings

I think it is a very good change. When there is no pandemic I operate from all around the world and would value this functionality. Björn SM7IUN Den mån 2 nov. 2020 kl 23:21 skrev Dave AA6YQ

On our club members can choose to use the club call or their own. With the proposed change that would be easy - and welcome. 73 de Knut LA9RY Den 02.11.2020 23.22, skrev Dave AA6YQ: