|
WinWarbler Pri sub - State
jetandkelly
Has anyone noticed in WinWarbler when you click on a call sign info about Pri Sub and or State does not change correctly? To duplicate this:
1) Make sure all info is cleared, by clicking on the X in WinWarbler 2) Click on any call sign in any of the receive windows 3) Notice the info up top changes as well as DXView 4) Now start click on different call signs in different receive windows or new call signs in the same window. Notice how Pri sub and or State does not always follow correctly? This is especially noticeable when selecting state side calls.
|
|
|
|
Re: DXKeeper Real Estate
Richard B Drake
While a 24" monitor is nice it really doesn't provide that much more
toggle quoted messageShow quoted text
screen real estate. But 2 20" monitors provide a lot more space. Most modern video cards do allow for dual monitors often one digital and one analog and your screen can be extended across both monitors. Most modern flat panel monitors can be configured for either digital or analog input and come with both cables. So, it's pretty simple to set up for one analog and one digital monitor. The set up I use has one 22" wide screen monitor configured for digital input and one 19" 4:3 monitor configured for analog input. My video card is an ATI 3400 series which came standard on a DELL Vostro 420. That's fairly low end as far as graphics cards go (that is it's not a super high speed gamers card) but it works great for my purposes. 73, Rich - W3ZJ Hank wrote:
I've been wondering about the best way to go: Two monitors or one of the new
|
|
|
|
Re: Feature request,,,,,possible idea?
Cliff Frescura K3LL
I like it.
I often find myself hitting the A=B VFO button after the initial SC interaction, then clicking on the other spot to play in two pileups. Perhaps it could be another option on the right click menu when you are on a spot in SC. 73, Cliff K3LL/6 From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com] On Behalf Of Scouse Sent: Thursday, March 31, 2011 9:22 PM To: dxlab@yahoogroups.com Subject: [dxlab] Feature request,,,,,possible idea? Hi Dave, Was tuning around yesterday and had a flash of inspiration. Would it be possible to have a button on Spotcollector to tune the VFO B into another spot. Say for example, you are working JA without a split, and another station pops up on the cluster say,,,,9K2, the ability to just press a button and tune VFO B to the next station to be worked could be an advantage,,,provided they are working without a split. Just an idea.. 73 Brian G0VAX
|
|
|
|
Re: VE7CC-1 spot source not "on" in Spot Collectro
Douglas Smith
--- In dxlab@yahoogroups.com, "W7ZZ" <w7zz@...> wrote:
I neglected to say in my original posting that the settings I specified are in VE7CC User. In DX Lab Suite, you use 127.0.0.1 and port 7300 as the Telnet address where the CC User software will be found, which Spot Collector will treat as if it's a node. You can name it whatever you like but the address is 127.0.0.1, port 7300. Sorry I left this out in original posting. W7ZZ
|
|
|
|
Feature request,,,,,possible idea?
Scouse <briang0vax@...>
Hi Dave,
Was tuning around yesterday and had a flash of inspiration. Would it be possible to have a button on Spotcollector to tune the VFO B into another spot. Say for example, you are working JA without a split, and another station pops up on the cluster say,,,,9K2, the ability to just press a button and tune VFO B to the next station to be worked could be an advantage,,,provided they are working without a split. Just an idea.. 73 Brian G0VAX
|
|
|
|
Re: DXKeeper Real Estate
Dave AA6YQ
Here's a nice little "wraparound" display:
toggle quoted messageShow quoted text
<http://www.seamlessdisplay.com/products_radius320.htm> 73, Dave, AA6YQ
-----Original Message-----
From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of Jerry Keller (K3BZ) Sent: Thursday, March 31, 2011 11:53 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] DXKeeper Real Estate I put in another video card and have 3 monitors.... Win7 supports more than that I think. 73, Jerry K3BZ -----Original Message----- From: Joe - WD�M Sent: Thursday, March 31, 2011 5:51 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] DXKeeper Real Estate Consider another option - many PCs have a video card with two outputs - I have dual monitors to take advantage of that and truly have more "real estate" - but they have to fit on the desk - a different concern. 73 Joe WD�M Celebrating 50 years in amateur radio http://www.wd0m.com On 3/31/2011 2:58 PM, Dave AA6YQ wrote: -----Original Message-----AA6YQ comments below ------------------------------------ Yahoo! Groups Links ------------------------------------ Yahoo! Groups Links ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1209 / Virus Database: 1500/3543 - Release Date: 03/31/11
|
|
|
|
Re: DXKeeper Real Estate
K3BZ
I put in another video card and have 3 monitors.... Win7 supports more than that I think.
toggle quoted messageShow quoted text
73, Jerry K3BZ
-----Original Message-----
From: Joe - WD�M Sent: Thursday, March 31, 2011 5:51 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] DXKeeper Real Estate Consider another option - many PCs have a video card with two outputs - I have dual monitors to take advantage of that and truly have more "real estate" - but they have to fit on the desk - a different concern. 73 Joe WD�M Celebrating 50 years in amateur radio http://www.wd0m.com On 3/31/2011 2:58 PM, Dave AA6YQ wrote: -----Original Message-----AA6YQ comments below ------------------------------------ Yahoo! Groups Links
|
|
|
|
Re: DXCC - DXK differences?
Dave AA6YQ
-----Original Message-----AA6YQ comments below From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of CSM(r) Gary Huber Sent: Thursday, March 31, 2011 11:02 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] Re: DXCC - DXK differences? I’ve been busy correcting my DXK logs so they compare to my DXCC award matrix. The only record I am unable to fix is a FR5ZQ/G contact which has been credited to both Reunion and Glorioso by the DX Desk leaving a FR-R 15M CW Verified by ARRL entry. How do I get the DX Desk to remove the incorrect entry when to make matters worse I have a LOTW QSL from FR5ZQ which is incorrectly credited to Reunion for the QSO I have a paper QSL showing Glorioso? 73,Contact Bill Moore at the DXCC desk, and explain what's wrong. He'll take it from there. Dave, AA6YQ
|
|
|
|
Re: Winwarbler not keeping freq
Dave AA6YQ
-----Original Message-----AA6YQ comments below From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of philboggan Sent: Thursday, March 31, 2011 9:35 PM To: dxlab@yahoogroups.com Subject: [dxlab] Re: Winwarbler not keeping freq Dave, Sorry for the delay. I have rebooted and am still having the same issue. I clicked on several spots tonight and only one would not display freq properly. window reliably display your transceiver frequency (as reported byDoes the "Xcvr Freq" panel in the upper-right corner of WinWarbler's Main Commander)? I've also noticed that WW will not change modes if a SSB or CW spot is clicked, but will switch to RTTY mode when a RTTY spot is clicked. I'm not sure if that is normal or not, I don't work much RTTY and don't use the CW part of WW. must appropriately configure SpotCollector, as described inIf you want clicking on an SSB or CW spot to "activate" WinWarbler, you <http://www.dxlabsuite.com/spotcollector/Help/ConfigurationGeneral.htm#Phone Modes Panel> here.If after reviewing this you have questions, don't hesitate to post them 73, Dave, AA6YQ
|
|
|
|
Re: upload log to club log timed out?
Dave AA6YQ
-----Original Message-----AA6YQ comments below From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of DANNY DOUGLAS Sent: Thursday, March 31, 2011 8:56 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] upload log to club log timed out? It looks like something didnt quite work out. I clicked the upload button, and instead of just doing the ones I had not previously uploaded to club log, it did the whole log file of 29K entries. Then when it finished preparing the file for upload, it started sending them to club log, I almost immediately got the following pop up: Upload file to club log: the connection with clublog terminated before the upload completed". I have been using this one-at-a-time upload, for the past 100 or so QSO files, added to the last manual upload I did by clicking on the upload button.(which took just fine). responsible defect(s).All we can do is wait for Club Log to identify and correct the 73, Dave, AA6YQ
|
|
|
|
Re: strange thing just happened
Dave AA6YQ
-----Original Message-----AA6YQ comments below From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of Bob N3PPH Sent: Thursday, March 31, 2011 8:52 PM To: dxlab@yahoogroups.com Subject: [dxlab] strange thing just happened I just had a qso which started 23:54 on the 31st and ended on the 1st. When I looked at my log the dates were flashing red, begin was 4/1 at 23:54 and end was 4/2 at 00:09. I changed them to the correct dates and times and all was well. I do not know if it is a bug with DXKeeper or the fldigi bridge but I thought I would bring it to your attention. 73,DXKeeper logs the start and end dates specified by the FLDigi bridge. Dave, AA6YQ
|
|
|
|
Re: DXCC - DXK differences?
I’ve been busy correcting my DXK logs so they compare to my DXCC award matrix.
The only record I am unable to fix is a FR5ZQ/G contact which has been credited to both Reunion and Glorioso by the DX Desk leaving a FR-R 15M CW Verified by ARRL entry. How do I get the DX Desk to remove the incorrect entry when to make matters worse I have a LOTW QSL from FR5ZQ which is incorrectly credited to Reunion for the QSO I have a paper QSL showing Glorioso? 73 es DX, Gary - AB9M From: CSM(r) Gary Huber Sent: Wednesday, March 30, 2011 10:39 PM To: dxlab@yahoogroups.com Subject: Re: [dxlab] Re: DXCC - DXK differences? Thanks Dave. Too much trouble (I think) to do anything with the old QSL records at the ARRL. This will let my get my DXK records straight and that will be good enough until I feel different and submit LOTW credits. 73 es DX, Gary - AB9M From: Dave Sent: Wednesday, March 30, 2011 10:31 PM To: mailto:dxlab%40yahoogroups.com Subject: [dxlab] Re: DXCC - DXK differences? --- In mailto:dxlab%40yahoogroups.com, "CSM\(r\) Gary Huber" <glhuber@...> wrote:AA6YQ comments below I have a hybrid DXCC which includes my original 1977 submission of 107 cards. I have a total of 211 â" 213 discrepancies in my DXCC â" DXK compare which seems to be because there is no mode / band information on the credit matrix for those original QSOs which are verified and count towards my MIXED count of 346 (total) / 338 (current). How do I resolve the discrepancy save resubmitting the old cards or submitting new LOTW credits? Is there an entry which can be made in DXK for a verified entity with an unknown mode and unknown band on the LOTW credit matrix? E - if only entity credit for DXCC has been grantedYes: set a QSO's "QSL_RCVD" to B - if only entity and entity-band credit for DXCC has been granted M - if only entity and entity-mode credit for DXCC has been granted 73, Dave, AA6YQ 73 es DX,
|
|
|
|
Re: VE7CC-1 spot source not "on" in Spot Collectro
Douglas Smith
You mention CC User. That's a program that, among other things, passes spots through to a logger, including DX Lab Suite. While it is written by VE7CC, it can connect with any node, including VE7CC-1 CC Cluster node, and pass its spots.
If that's what you're doing, your settings in CC User should be as follows: Configuration - Ports/Logging Program/Logging Program Connection: check the Telnet box and click on the Use Port 7300 button. Check the appropriate boxes in the Data Sent to Logging Program box on the same screen Be sure to check "Live Spot Format" and NOT "DX Tab Format" (the latter will not pass spots that DX Lab Suite will see!). If you want detailed instructions, email me off list. I prepared exhaustive step by step instructions for a local club presentation on the VE7CC User software. If you're using VE7CC-1 CC Cluster as a node, feeding spots directly from it to DX Lab Suite, then the address of the node is ve7cc.net, NOT VE7CC-1. Specify port 23, not port 7300. In this configuration, you are using DX Lab Suite to filter the spots and VE7CC-1 as raw input of spot data. If you use the CC User program, it can be the "front end" for DX Lab Suite, as the only filter, or as a prefilter or in conjunction with filter settings in DX Lab Suite as you deem appropriate. Hope this is helpful. 73, Doug W7ZZ
|
|
|
|
Re: Winwarbler not keeping freq
philboggan <phil.boggan@...>
Dave,
toggle quoted messageShow quoted text
Sorry for the delay. I have rebooted and am still having the same issue. I clicked on several spots tonight and only one would not display freq properly. I've also noticed that WW will not change modes if a SSB or CW spot is clicked, but will switch to RTTY mode when a RTTY spot is clicked. I'm not sure if that is normal or not, I don't work much RTTY and don't use the CW part of WW. Thanks for any advise. 73 Phil, KD5MMM ..
--- In dxlab@yahoogroups.com, "philboggan" <phil.boggan@...> wrote:
|
|
|
|
Re: DXKeeper Real Estate
DANNY DOUGLAS <n7dc@...>
I have purchased three seperarte dual channel boards from Tiger,(three computers) and had all three fail, due to lightning storms here, so am back to a single channel card right now, but will be finding another shortly. I run the whole suite at any given moment, with two or three windows open on the screen. With two monitors, I kept almost everything up on the two screens. Its the only way to fly.
toggle quoted messageShow quoted text
Danny Douglas N7DC ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU CR9/7Y/KH7/5A/GW/GM/F Pls QSL direct, buro, or LOTW preferred, I Do not use, but as a courtesy do upload to eQSL for those who do. Moderator DXandTALK http://groups.yahoo.com/group/DXandTalk Digital_modes http://groups.yahoo.com/group/digital_modes/?yguid=341090159
----- Original Message -----
From: Joe - WDØM To: dxlab@yahoogroups.com Sent: Thursday, March 31, 2011 8:58 PM Subject: Re: [dxlab] DXKeeper Real Estate Hi Hank, Check your video card - if it has two outputs (HDMI and VGA), you're ready to go. If not, you can purchase a relatively inexpensive one for around $30 that will do the job. Just plug in the cables to your monitors, and you're set! You'll have to adjust the desktop to show two monitors, but that's easily done in Windows. Enjoy! Joe WDØM Celebrating 50 years in amateur radio http://www.wd0m.com On 3/31/2011 6:21 PM, Hank wrote: > > Thanks to all who responded to my question; especially Joe, WD0M and Paul, > N1BUG for their pictures. Now I have to ask, how do you connect all those > monitors to your computer? I'm serious. Do you need a special card or > computer to do this? I'll be in the market soon for a new computer so > now is > the time to plan. > > Hank/ke0cu > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
|
|
|
|
Re: DXKeeper Real Estate
Joe - WDØM <wd0m@...>
Hi Hank,
Check your video card - if it has two outputs (HDMI and VGA), you're ready to go. If not, you can purchase a relatively inexpensive one for around $30 that will do the job. Just plug in the cables to your monitors, and you're set! You'll have to adjust the desktop to show two monitors, but that's easily done in Windows. Enjoy! Joe WDØM Celebrating 50 years in amateur radio http://www.wd0m.com On 3/31/2011 6:21 PM, Hank wrote:
[Non-text portions of this message have been removed]
|
|
|
|
Re: upload log to club log timed out?
DANNY DOUGLAS <n7dc@...>
It looks like something didnt quite work out. I clicked the upload button, and instead of just doing the ones I had not previously uploaded to club log, it did the whole log file of 29K entries. Then when it finished preparing the file for upload, it started sending them to club log, I almost immediately got the following pop up: Upload file to club log: the connection with clublog terminated before the upload completed". I have been using this one-at-a-time upload, for the past 100 or so QSO files, added to the last manual upload I did by clicking on the upload button.(which took just fine).
toggle quoted messageShow quoted text
Danny Douglas N7DC ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU CR9/7Y/KH7/5A/GW/GM/F Pls QSL direct, buro, or LOTW preferred, I Do not use, but as a courtesy do upload to eQSL for those who do. Moderator DXandTALK http://groups.yahoo.com/group/DXandTalk Digital_modes http://groups.yahoo.com/group/digital_modes/?yguid=341090159
----- Original Message -----
From: Dave AA6YQ To: dxlab@yahoogroups.com Cc: Michael G7VJR Sent: Thursday, March 31, 2011 8:07 PM Subject: RE: [dxlab] upload log to club log timed out? >>>AA6YQ comments below -----Original Message----- From: dxlab@yahoogroups.com [mailto:dxlab@yahoogroups.com]On Behalf Of DANNY DOUGLAS Sent: Thursday, March 31, 2011 7:23 PM To: dxlab@yahoogroups.com Subject: [dxlab] upload log to club log timed out? I have been getting several pop up notes "upload qso to club log timed out" I take it this means they are not being automatically uploaded, >>>Correct. but now what? Do I need to do something later on to resend them. >>>Clicking the Upload button in the "Club Log" panel on the Main window's "Check Progress" tab will upload all QSOs not yet uploaded to Club Log. I just got three of them in a row, so does this mean club log not available right now? >>>I just successfully uploaded a QSO to Club Log. >>>There is a defect in the programmatic interface that Club Log uses to accept QSOs from DXKeeper and other applications. At last report, Michael G7VJR had confirmed that the upload request was properly reaching Club Log, but had not determined why it was being ignored, resulting in the "time out" reported by DXKeeper. 73, Dave, AA6YQ
|
|
|
|
strange thing just happened
Bob N3PPH <rsheskin@...>
I just had a qso which started 23:54 on the 31st and ended on the 1st. When I looked at my log the dates were flashing red, begin was 4/1 at 23:54 and end was 4/2 at 00:09. I changed them to the correct dates and times and all was well. I do not know if it is a bug with DXKeeper or the fldigi bridge but I thought I would bring it to your attention.
-- 73, Bob N3PPH
|
|
|
|
Re: DXKeeper Real Estate
N1BUG
Hank wrote:
Hank, You need multiple video cards or one card with multiple outputs. The monitor you see in the center (above my radio) is connected to the VGA port built into the computer motherboard. The other four are connected to a cheap 4 head (4 monitor outputs) video card I picked up for $25 used. Everything was pretty much plug and play with this setup. An earlier setup with four monitors used four separate single monitor video cards. That one was a little tricky to configure the hardware plus it used up all my expansion slots. I believe new multiple monitor video cards may be getting scarce. There seems to be a feeling nobody needs more than one monitor with the current generation widescreens! NOT necessarily true for some applications, but I guess we are not exactly mainstream! 73, Paul N1BUG
|
|
|
|
Re: DXKeeper Real Estate
Hank Tyler
Thanks to all who responded to my question; especially Joe, WD0M and Paul,
N1BUG for their pictures. Now I have to ask, how do you connect all those monitors to your computer? I'm serious. Do you need a special card or computer to do this? I'll be in the market soon for a new computer so now is the time to plan. Hank/ke0cu
|
|
|