+ AA6YQ comments below Dave, same thing here. After a few weeks in TX, upgraded the DXkeeper, and the expansion of database fails. I have over 70k QSO, do you want me to send you the database

Dave, same thing here. After a few weeks in TX, upgraded the DXkeeper, and the expansion of database fails. I have over 70k QSO, do you want me to send you the database (compressed via email ? )

I learned last night that Pathfinder's "NZ Callbook" search is no longer working... 73, Dave, AA6YQ

Dave Both Gridtracker and DXK started working ok last night. I did note both Sync QSO and Sync QSL took longer than normal. I will also try the work around. 73 Tim VE6SH

To add a datapoint, and FWIW. I've been obsessively syncing LoTW QSOs. 3, 4 times a day at least. I never use control key modifier, I just want to check results since the last time, hoping that

Over the past few days, several reports of "Unable to download from LoTW: Invalid Request" have been posted here. With "Log debugging info" enabled, the resulting errorlog.txt shows this

Dave, Sidney, Thanks. Jim - KR9U

+ AA6YQ comments below When I select a different filter group (e.g. Narrow) and then select Data-U (wide) the Filter Group changes back to wide (both on DX-C and the radio) but the radio does not go

+ AA6YQ comments below In DXK when I select the Check Progress tab and then WAS Progress button, the report only shows the bands 80, 15 and 10 meters; and I can't figure out why. I'm looking

Jim, Have you set up to include 6M? You have to do that in the AWARDS tab under config. Sid K3SX

In DXK when I select the Check Progress tab and then WAS Progress button, the report only shows the bands 80, 15 and 10 meters; and I can't figure out why. I'm looking specifically for 6 meters. Jim -

When I select a different filter group (e.g. Narrow) and then select Data-U (wide) the Filter Group changes back to wide (both on DX-C and the radio) but the radio does not go into DATA mode. I

+ AA6YQ comments below I am running DX Commander 15.0.9. It has been working as expected with my IC-7610. I recently had to substitute an IC-7300 while the 7610 is off for service. I made what I

No just tried and both DXK and GT are not updating (and I get the same error message with DXK as others). Sounds like it is a networking issue, but has baffled me. Tim VE6SH

“… with spot notes "begging" ” - Hhhaaaaa !! oh that’s so good … best thing I’ve heard all day

I am running DX Commander 15.0.9. It has been working as expected with my IC-7610. I recently had to substitute an IC-7300 while the 7610 is off for service. I made what I thought were the

Ooops, crossed the streams. I mentioned this issue in another thread and noted that GT was simultaneously having issues.

Undoubtedly, that's why I brought up GT. As of about half an hour ago, both were able to download/sync once again. I always love seeing new confirmations, especially when they indicate I just worked

I have same issue. I can send a errorlog if you like. This only started yesterday. I also note that Gridtracker is not able to sync with LOTW so I thought it was my Firwall, but all looks good. Is it

+ AA6YQ comments below + No, SpotCollector provides an independent setting: "Maximum age of last LoTW upload" in the Controls panel on the Configuration window's "Spot Database" tab. + You wouldn't