I am currently working on an interface for the HAM IV and similar rotators. It will have the same features than the rotator interface, published in the 2019 October QST. A prototype has been

Thanks for the screen shots, Paul. Pathfinder uses the Microsoft Web Browser component to render web pages. The errorlog shows that a module named jscript9.dll faulted with error code 0xc0000005;

When using WinWarbler's Outgoing Spot window the "Mode" is added to the notes field when posted on the cluster. Is there anyway of disabling the "Mode" so it does NOT show up in the clusters notes

+ AA6YQ comments below Dave - I did not see anything unusual in the Windows Security Log, but attached in the Windows 10 Event logs. The times did coincide with when the PF went away. + This group

Did you load the saved workspace when you moved DXLab Suite from the Windows 7 to Windows 10 system? It sounds like you did not do so and there are several settings that are different. In

I just switched to a new W10 computer and cannot get Spot Collector to put clicked on call sign in call window of WW. Also when running JTalert and logging to DXKeeper there is no CBA activated, on

That single lever is a two section rotary switch - very difficult to interface with any of the after market boards. You will probably do best with a replacement controller. If you choose to build

Your ham m will be similar. The arduino relay contacts will be in parallel with the switches in the controller box. https://www.egloff.eu/index.php/en/la-technique/arduino/k3ng-rotator-for-hamiv

I'm doing this to interface ham iv with analog controller box. A voltage divider to adjust the meter voltage to 0-5v will be required. Gonna use solid state relay for brake And 2 channel relay board

Brown with one lever, big meter that is 180-0-180 or S to N to S.

Hi Dave... When using WinWarbler's Outgoing Spot window the "Mode" is added to the notes field when posted on the cluster. Is there anyway of disabling the "Mode" so it does NOT show up in the

Dave Sri screen shots I embedded didn't make it through. 73 Paul

Dave - I did not see anything unusual in the Windows Security Log, but attached in the Windows 10 Event logs. The times did coincide with when the PF went away. 73 Paul w2eck

Stephen The ERC Version 4 either RS232 or USB can be used with your rotator, no need to buy a new controller. The relays in the ERC are wired across the switches in the normal

+ AA6YQ comments below + No. JT-Alert sends DXKeeper a message containing the QSO to be logged, and DXKeeper logs it. + Do you have JTAlert configured to direct DXKeeper, DXView, and Pathfinder to

Is it possible to activate the DXKeeper Capture Window to work along with WSJT-X? While the JTAlert window is good, it shows limited information about the callsign working. This is not a critical

Am 23.08.2021 um 21:15 schrieb Dave AA6YQ: Tnx, Dave! The reason was, that the Contestlog ADIF-export had dxcc=54 (UA) and not 15 (UA0). It is difficult to guess the loacation of a /M oder /P atation

+ AA6YQ comments below As the title says -- can I download my contacts from LoTW and then import them into DXKeeper? It's been quite a while since I used the suite and all my data was on a machine

+ AA6YQ comments below I worked in the RDA contest RQ9O/P in NS-20. After log import from my UCXLog contest logger there was a mismatch "oblast" was set to "PM", district was "NS-20" as logged and

I have the Rotor EZ in one of my controllers and it works well. I’ve recently been researching how to automate another rotor which has the old single lever control box that Joe described. I think