Stephen The ERC Version 4 either RS232 or USB can be used with your rotator, no need to buy a new controller. The relays in the ERC are wired across the switches in the normal

+ AA6YQ comments below + No. JT-Alert sends DXKeeper a message containing the QSO to be logged, and DXKeeper logs it. + Do you have JTAlert configured to direct DXKeeper, DXView, and Pathfinder to

Is it possible to activate the DXKeeper Capture Window to work along with WSJT-X? While the JTAlert window is good, it shows limited information about the callsign working. This is not a critical

Am 23.08.2021 um 21:15 schrieb Dave AA6YQ: Tnx, Dave! The reason was, that the Contestlog ADIF-export had dxcc=54 (UA) and not 15 (UA0). It is difficult to guess the loacation of a /M oder /P atation

+ AA6YQ comments below As the title says -- can I download my contacts from LoTW and then import them into DXKeeper? It's been quite a while since I used the suite and all my data was on a machine

+ AA6YQ comments below I worked in the RDA contest RQ9O/P in NS-20. After log import from my UCXLog contest logger there was a mismatch "oblast" was set to "PM", district was "NS-20" as logged and

I have the Rotor EZ in one of my controllers and it works well. I’ve recently been researching how to automate another rotor which has the old single lever control box that Joe described. I think

+ AA6YQ comments below Generally speaking, and with respect to radio tuning, I would expect single clicking an FT8 station in the Commander Bandspread to do the same things as double clicking the

+ AA6YQ comments below Yesterday, halfway thru importing an ADIF log, Pathfinder went away and the remainder of the logs were imported to DX Keeper with no call-book data. Today in the process of

Is the controller the old "brown" single lever controller that is not much larger on the face than the meter itself or is it one of the newer, large "box" with three lever switches (CW, Brake,

It's in this book

Suggestions?

As the title says -- can I download my contacts from LoTW and then import them into DXKeeper? It's been quite a while since I used the suite and all my data was on a machine that

I worked in the RDA contest RQ9O/P in NS-20. After log import from my UCXLog contest logger there was a mismatch "oblast" was set to "PM", district was "NS-20" as logged and both fields were flashing.

I've seen one or more projects that used an Arduino to control the CDE rotors. One project is in the Arduino project book from the ARRL. I forget which book it's in. 73 Stan KM4HQE Sent with

First of all, you need a new digital rotor control box. Can’t do it with the stock box. K5FUV Sent from AT&T Yahoo Mail for iPad

I have an 1970's Ham M rotor and CDE controller that is serving me well. Is it doable to hook USB to DXView? If so, how? If not DXView, any other way without changing rotors? The Ham M has 8 wires,

Joe/Dave - Thanks for the help. The Mark item Joe mentioned was all OK. However, my K3 AFSK TX is set to FIL OFF. The problem was that the Speaker was muted - found it after reviewing the item Dave

Howdy, all; Generally speaking, and with respect to radio tuning, I would expect single clicking an FT8 station in the Commander Bandspread to do the same things as double clicking the same station

Yesterday, halfway thru importing an ADIF log, Pathfinder went away and the remainder of the logs were imported to DX Keeper with no call-book data. Today in the process of looking up the remaining