Thank you Dave, All the years that I have been using DXkeeper, I never noticed that screen! I guess that I better sit up and smell the roses...Since uploading is the last thing I do each session, I

Is there a way to add qsls from multiple logs to the qsl que, so you can print all labels at once? When I change logs, it appears to wipe the qsl que...

From reading some online discussions about N1MM, it seems that as good a logging program as N1MM is, it provides no way to create a dupe sheet of a log. We used WriteLog for Field Day, one of its

N1MM does not create a 'dupe' sheet either. ARRL will accept a Cabrillo (file or printout) as a substitute. From the 2011 rules: 8.7. Cabrillo format log files are not required for Field Day entries.

Thanks a lot Dave, that sorted it. Still can't figure out why it went gone wrong. 73 Dave g4mul@...

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of jgmags2000 Sent: Saturday, July 02, 2011 11:21 PM To: dxlab@... Subject: [dxlab]

After using SYNc for LOTW and EQsl is there a way to get a list of those callsigns just updated? I know you we get the notepad telling us how many but not the individual callsigns ? 73, John KJ1J

To be clear, step 1 below means deleting the first few lines of the report and all lines after the list of 6m QSOs. 73, Dave, AA6YQ

If you have the Excel spreadsheet application installed, you can 1. edit the DXKeeper-generated report to contain only the list of 6m Grids 2. direct Excel to open the edited report (in the Open

How does one get an invitation to join the FOC?

44 = half an 88...... maybe it means just hugs and no kisses??

73 + 88 = 161

There *were no changes* other than Europa, and the four "European" regions in Asiatic Russia. Europa was added to the database and the other four were updated to be closer to the center of the

There were no changes in lat/long for those entities. The only changes were for the added Europa (FT#E) and the updated entries for the "European" part of Asiatic Russia. 73, ... Joe, W4TV

I made NO changes and now everyone of a dozen entities which were showing incorrect short and long headings are now working correctly. The only thing I can figure is a local look up problem in the

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of DANNY DOUGLAS Sent: Saturday, July 02, 2011 9:35 PM To: dxlab@... Subject: [dxlab] OK,

Most of my headings are now incorrect with KP4 now showing headings of SHORT 300 (should be 135 or so) and Long of 200.

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of Radio W4BYG Sent: Saturday, July 02, 2011 6:33 PM To: dxlab@... Subject: [dxlab] Unable

OK, trying to work a few in the RTTY test, and I find WnWarbler always on top. I didnt set it, and know there is a way to do so, but cant find the box to untick (if that is indeed the problem).

--- In dxlab@..., "CSM&#92;(r&#92;) Gary Huber" <glhuber@...> wrote: > > After upgrading to DXCC-2.3.6 I’m finding the Headings SHORT and LONG are no longer correct for DX entities