DXLab@groups.io | Messages

Home Messages Hashtags

Messages

Between

and

Re: WW Hangs in RTTY Xmit - Not with MixW

HI Rich, I only have Navigator and this is all controlled by Commander with nothing else. I also thought like you this could be some collison effect so I added extra <stop> placing two or even three

By NY2KW · #93840 ·

Re: WW Hangs in RTTY Xmit - Not with MixW

Hi Jim, FSK with the navigator. Its not RFI as I can reporduce with the radio into a dummy load at < 1 watt. I just sent Dave the errorlog. 73 Jerry K1JOS

By NY2KW · #93839 ·

Re: WW Hangs in RTTY Xmit - Not with MixW

How are you controlling PTT? One cause for the problem you reported is having two methods of PTT control active at the same time, one from a CAT command and one using a hardware signal. Some radios

By ve3iay <ve3iay@...> · #93838 ·

Re: DXLab on Linux Question about serial ports

Mark, Yes, I had not thought to tell you I was not running the OSE version of VirtualBox. I run the standard version from the Oracle website to keep up to date with the latest improvements and

By n6ws · #93837 ·

Re: WW Hangs in RTTY Xmit - Not with MixW

Jerry, Navigator and are u running in AFSK or FSK ? from the shack of WB5AAA 73 de JIM

By jim <wb5aaa@...> · #93836 ·

Re: WW Hangs in RTTY Xmit - Not with MixW

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of jsternmd Sent: Sunday, July 03, 2011 10:27 AM To: dxlab@... Subject: [dxlab] WW Hangs in

By Dave AA6YQ · #93834 ·

Re: Creating dupe file for Field Day

I can't resist. Unless things have changed in the last year, no contest requires a dupe sheet when submitting with a Cabrillo format log file. Only paper logs require a dupe sheet and BTW many

By ART SEARLE <w2nra2@...> · #93835 ·

WW Hangs in RTTY Xmit - Not with MixW

I have been using DxLab for years but held out on WW using instead MixW. Finally I crossed over and spent the time to read and set it up with my Navigator and created a slew of custom macros. It

By NY2KW · #93833 ·

Re: DXLab on Linux Question about serial ports

Thanks to Bill and all the others who offered offline suggestions I finally got DXLab working in Ubuntu Linux and thought I would relate my experience. First off, the Virtualbox OSE (Open Source

By wc5m <wc5m@...> · #93832 ·

Re: adding qsl to que from multiple logs

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of Jamie WW3S Sent: Sunday, July 03, 2011 7:52 AM To: dxlab@... Subject: [dxlab] adding qsl

By Dave AA6YQ · #93831 ·

Re: listings

Thank you Dave, All the years that I have been using DXkeeper, I never noticed that screen! I guess that I better sit up and smell the roses...Since uploading is the last thing I do each session, I

By JGMAGS <jgmags2000@...> · #93830 ·

adding qsl to que from multiple logs

Is there a way to add qsls from multiple logs to the qsl que, so you can print all labels at once? When I change logs, it appears to wipe the qsl que...

By Jamie WW3S · #93829 ·

Re: Creating dupe file for Field Day

From reading some online discussions about N1MM, it seems that as good a logging program as N1MM is, it provides no way to create a dupe sheet of a log. We used WriteLog for Field Day, one of its

By John Bastin <jbastin@...> · #93828 ·

Re: Creating dupe file for Field Day

N1MM does not create a 'dupe' sheet either. ARRL will accept a Cabrillo (file or printout) as a substitute. From the 2011 rules: 8.7. Cabrillo format log files are not required for Field Day entries.

By kk1w2000 <kk1w@...> · #93827 ·

Re: Lost AZI

Thanks a lot Dave, that sorted it. Still can't figure out why it went gone wrong. 73 Dave g4mul@...

By G4MUL · #93826 ·

Re: listings

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of jgmags2000 Sent: Saturday, July 02, 2011 11:21 PM To: dxlab@... Subject: [dxlab]

By Dave AA6YQ · #93825 ·

listings

After using SYNc for LOTW and EQsl is there a way to get a list of those callsigns just updated? I know you we get the notepad telling us how many but not the individual callsigns ? 73, John KJ1J

By jgmags2000 <jgmags2000@...> · #93824 ·

Re: VUCC progress reports in DXKeeper

To be clear, step 1 below means deleting the first few lines of the report and all lines after the list of 6m QSOs. 73, Dave, AA6YQ

By Dave AA6YQ · #93823 ·

Re: VUCC progress reports in DXKeeper

If you have the Excel spreadsheet application installed, you can 1. edit the DXKeeper-generated report to contain only the list of 6m Grids 2. direct Excel to open the edited report (in the Open

By Dave AA6YQ · #93822 ·

Re: Off topic, what is the meaning of 44?

How does one get an invitation to join the FOC?

By K3BZ · #93821 ·

121801 - 121820 of 215640

Home Hashtags About Features Pricing Updates Terms Help Twitter