-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of martyn1ht Sent: Wednesday, February 02, 2011 11:24 AM To: dxlab@... Subject: [dxlab] Re:

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Robert Sheskin Sent: Wednesday, February 02, 2011 8:31 AM To: dxlab@... Subject: Re:

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Barry Bourgond Sent: Wednesday, February 02, 2011 8:27 AM To: dxlab@... Subject: [dxlab]

--- In dxlab@..., "Richard J. Fiero II W5TFW" <joeyw5tfw@...> wrote:

Never mind Al Gore. AIUI, warmer oceans mean that the air picks up more moisture that then falls either as rain or as snow when it reaches cooler regions. 73 Alan NV8A

These 2 searches should produce the same "Add Needed" result for 80 and 160. Or at least I want them to. They do not. #1: (band = '160m' or band = '80m') and QSO_Begin > #1 jan 2010# and DXCCID <>

I have not had any new spots appear in the main window since yesterday morning, although spots are appearing continuously in the individual source window. I have checked to be sure I am not filtering

In thinking about about, do we know whether more people add comments to spots or not? If the majority make comments, perhaps the ctrl-click action should be the default and the ctrl-click action would

Well, think of it this way. Imagine what the ground reflectivity will be once it stops snowing........... Lee KC4ART

Pete very few realize that the Post Master in Stanley is the issuing officer for ham calls. the Falklands for many years did not have telephone service between a lot of the camps and ranches on either

Hi I observe such effect, when you start DX Launcher, after start DX keeper, and Path Finder will no start or closed after primary start Start Path Finder over DX Launcher - the problem

I have seen that a couple of times also, stopping and restarting Pathfinder has always worked for me. 73, Bob N3PPH

I keep getting the following error. DXKeeper Callbook error: Required version of Pathfinder not running. I have the latest version, version 5.6.4. Any ideas?

Hi Dave, When I launch WinWarbler 6.9.7 with FT2000D in CW and Commander showing CW-R, WinWarbler changes mode to Phone and Commander and Rig change to Phone. If I change WinWarbler's mode to CW and

I am TRULY " Shaken by the things I hear from you Guys ! " where is your TRUST in AL Gore ! ~~~~~~~~~he has made Billions of dollars lying to all of YOU ! by the way, where IS al Gore ? surely

I had nested my crankup tower well prior to this storm hitting. The antenna was approximately at the 35 feet level Now it's at the 25 feet asl that's 'Above Snow Level'. Dave, can you convert that

If you choose to upload each & every QSO when it's logged, clublog qill get all the infos available at logging time. Later, when that already-uploaded QSO gets confirmed (either LotW or QSL card),

As a DXK & ClubLog user I upload my complete ADIF log to ClubLog about once a month & delete the existing one to enable it to pick up any QSLs received & recorded in the intervening period. ClubLog

+++ AA6YQ comments below

Hmm, that wouldn't update uploaded QSO's QSL info, would it ? -- Laurent F1JKJ 2011/2/2 Dave AA6YQ <aa6yq@...>