Updated eQSL AG and LotW databases are available via the Databases tab of DXView's Config window. Thanks, Renzo. 73, Dave, AA6YQ

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of g7tmu Sent: Monday, April 05, 2010 3:42 PM To: dxlab@... Subject: [dxlab] DXkeeper Record

Hi Dave - Thanks for the reply. My problem was that I was never asked to update the station_data file in C:\Documents and Settings, so I didn't know to do it. Once I copied the file from the old

Hi Rick Many thanks for the infos but it's very important to know that I create only the database for DXView from the list edited by Robert HB9BZA. Robert warns that this list is extremely valuable

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of wb2nvr Sent: Monday, April 05, 2010 4:24 PM To: dxlab@... Subject: [dxlab] TQSL Station

yes, that works (hold shift when you hit "spot" button in WW) ... That technique is also useful to see the "Tags" column in SC for special callsigns (e.g. club memberships). --david [Non-text

Thanks, Jim. That's where I'm looking. The drop down window for Station Locations is blank, even after I click on update. Bob WB2NVR

Bob Look under DXK/QSL/QSL Config/LoTW. This is where the password, path and QTH are set up. 73 - Jim - K8SIA Sent: Monday, April 05, 2010 5:02 PM To: dxlab@... Subject:

Hi Dave, I have just uploaded an updated LoTW user list database, now it is at: 32,931 calls in 333 current countries - updated on 02-APR-2010 73,

Hi Rich - Thanks! Yes, I see my certificates in TQSL. I don't see them in the DXKeeper QSL configuration page, in the TQSL section. There is a drop down window for station locations - mine is

You can see and edit your station locations by running TQSL.exe. 73, Rich - W3ZJ wb2nvr wrote:

Hi Dave - I just installed DXKeeper on a new computer, and it's not seeing my station locations. In the DXKeeper QSL Configuration tab, I entered the TQSL.exe pathname. I don't remember how to

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Richard J. Fiero II W5TFW Sent: Monday, April 05, 2010 10:24 AM To: dxlab@... Subject:

Placing <xcvrcommand: 'ZZMD07;> in WinWarbler's RTTY startup macro should accomplish the objective. 73, Dave, AA6YQ

I have just tried loading DXKeeper on my new Sony laptop which runs Windows7 '64 bit version'. All works fine, as far as I can see, except there is no 'qso record number' displayed betweeen the video

Dave, 1. set "Limit Add and Sync operations to this station callsign" to WA8RXI All is well, LoTW_Sent=Y and LoTW_RCVD=R on all 348... Have added a STATION_CALLSIGN column to my excel

John, Correct, I changed "Limit Add and Sync operations to this station callsign" from N8XI to WA8RXI and all is well Thanks, 73, Rick - N8XI

Dave, Rich, John, et al Your first suggestion of changing the Station_Callsign to my previous call for the 348 QSOs was the first thing I needed to do. And the final piece that you provided: DXK >>>

Dave, is there a WAY to make spot collector automatically put in the notes Column the grid squares during a contact ?

Welcome to the South East John. It's pollen alright and it will get worse. The season hasn't actually begun here in Maryland yet but it will within the next couple of weeks and it will be so thick