SpotCollector can correctly interprets some spot notes with multiple grids, e.g. DM12 > DM65 Or DM12 into DM65 If it can determine the spotting station's grid square and this matches one of the

What is the exact error that you get. It might help to determine the problem to know that? Gil, W0MN http://webpages.charter.net/gbaron N 44.082147 W 92.513085 1050' EN34rb Hierro Candente, Batir

Gary, What is the text of the error you receive from eQSL? 73, Rich - W3ZJ eQSL Support Volunteer

I recently started using DXLab (a really great piece of work) and have most everything working on an eMachine running Vista Home Basic. I've got the LOTW uploads and synch working but eQSL has been a

Hello Koen and Dave, I manage several of Callsigns like: ON2AD - my previous Callsign ON3AD - my own callsign ON4ANL - Clubstation of NLB ON4ANL/p - Clubstation of NLB ON30NLB - Special Call of

Thanks, Dave. That should fix it. Perhaps SC could be programmed to ignore multiple grid locations? 73, Bill W6WRT ------------ ORIGINAL MESSAGE ------------

LoTW users list is now (21.425 calls in 318 current countries - updated on 23-JUL-2008) and is ready to download via this

The new DOK list is available in the files section. Date DOK List 24/07/08. Koen ON7RK

Hi Dave, Thanks for the response. That was so quick! I wondered if that was the way to do it but due to allo the other clever things the software does I thought there may have been a cunning plan to

If you uncheck "Initialize eQSL Sent to 'R' for each logged or imported QSO" on the "QSL Config" window's eQSL tab, then when you direct DXKeeper to identify QSOs for uploading to eQSL, only those

Hi Dave I agree with your writing, I simulated a smooth rotor operation with my terminal programm and a batch file, works fine, starts with 15 % and ends with 15 % :-). The main reason, why I dont

I want to use eQSL.cc and wonder if there is any way of filtering multiple QSO's with the same station i.e. regular sked's etc. so the stations I work are not bombarded with QSL's for a daily rag

Sorry, Joe, but it's quite a bit more complicated than "a little loop". 1. Commander will be interacting with your transceiver while its rotating your antenna; control of the rotator must be designed

Hi Dave as I understand a little bit , I look in the cat manual http://yaesu.com/downloadFile.cfm?FileID=1995&FileCatID=158&FileName=FT%2D2000%5FCAT%5FMANUAL.pdf&FileContentType=application%2Fpdf on

Comments are welcome! 73's Giuseppe, IT9FGA

Dave, When it's just about screenspace, a pulldown menu will do the job also. But it's up to you, if it's usefull or not... Koen ON7RK different of "radio screen Behalf Of Koen the callsigns,

Take a look at the DXGrid column in the W5ZY spot database entry. What grid square do you see there? The spot notes for W5ZY are DM12<ES>DM65 which led SpotCollector to erroneously conclude that

W5ZY is one. When I When I right-click on the SC main display line and select "turn rotator to short path", it copies the callsign correctly into DXView, but shows the short path heading as 211

If with "Contest mode" enabled you type a callsign into the Capture window and strike the Enter key, the Main window's Log Page Display will show all QSOs made with that callsign during the current

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of Bill Henderson Sent: Wednesday, July 23, 2008 4:24 PM To: dxlab@... Subject: [dxlab] Re: