W5ZY is one. When I When I right-click on the SC main display line and select "turn rotator to short path", it copies the callsign correctly into DXView, but shows the short path heading as 211

If with "Contest mode" enabled you type a callsign into the Capture window and strike the Enter key, the Main window's Log Page Display will show all QSOs made with that callsign during the current

-----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of Bill Henderson Sent: Wednesday, July 23, 2008 4:24 PM To: dxlab@... Subject: [dxlab] Re:

I didn't ask the question correctly What I meant was... Could I assign parameters that the contest would allow me to work the same station once in each band in all three modes and then once I worked

Hi Thanks to both of you for getting back so soon. When working the likes of 80m or 40m it's often useful to know where the spot came from to help you decide whether or not a contact is

Yes. You can type whatever you like into the "Contest ID" selector on the Config window's Contest tab. With "Contest Mode" enabled, each newly-created QSO will have its Contest item initialized to

I looked through the wiki and didn't see that you can 'create' a contest Upcoming FlexRadio QSO Party usual hf bands 3 pts for working another flex radio (you can work the same station on each

Hi Dave, I wrote another msg, before reading this, tnx for your effort, I believe it should work well, with the DMU-2000 it is a great deal. tnx 73 Joe, OE3JTB Of Joe

Hi Dave tnx for fast answer, I thought, its possible without an interface, because the TRX is connected via the Yaesu original interface with the rotor, there are CAT commands in the reference list,

Please provide a couple of examples of US callsigns that when right-clicked in a Spot Database Entry result in rotation to the wrong heading. Thanks! 73, Dave, AA6YQ

Thanks, Koen; I understand now. There are users who operate with one callsign, but from many different locations. Unlike the current station-location selector, an array of "radio buttons" for each

It's certainly easier for me to debug problems in the current releases than in older releases. However, the incidence of problems in older releases is low. 73, Dave, AA6YQ

A review of the CAT documentation reveals that interface is very low- level: 1. rotate clockwise 2. rotate counterclockwise 3. increase speed by 1% 4. decrease speed by 1% 5. ask transceiver to

Dave, When you have 2 or more call's in use within the same logbook and LOTW, you have to click into the station location field to change the call for up and downloading to LOTW, or you can change

Bill, I am not sure there is adequate "value added" to this compared to the increase in processing required. Jose - N1BAA Dave AA6YQ wrote:

This could be implemented, but would increase the processing required for each new spot database entry. Why is the spotting station's DXCC entity of interest? 73, Dave, AA6YQ

Sorry, Koen, but I don't understand. Please elaborate. 73, Dave, AA6YQ

Dave, The station location is a nice option... Would it be not easyer to add radiobuttons with the callsigns who are valid for LOTW. 73 Koen ON7RK

Thanks, Joe; I forgot that Yaesu provide a CAT instruction to control an attached Yaesu rotator. I will extend Commander to support this, and then add an "Transceiver Control Software" option to

I am using rotor control with an Alfa Spid rotator. When the main SpotCollector window is open, I can right-click on a DX entry and select the option to turn the rotor to the short path heading. It