I keep the world map minimized most of the time. The majority of the time, when I look at the world map, it's only to see the gray line. I'm using two monitors. It's real handy when I'm contesting,

(1) I didn't know that would do what it does, but.... (2) that leaves the size much bigger than when I started! LOL! What I was hoping I'd see was what I started with, before I added panels - i.e., I

Thanks Rich. Art (W2NRA) pointed out my faux pas as well. Yes, the TO prefix doesn't specify the country of operation. Because it all worked so well in DXView, I forgot about this. I also had

Hello, I read the manual, but about QSLing and the indicators I got a little bit confused. In the QSL_rcvd box, what is the difference between "I" and "X" ?? In APP_DXKeeper_EQSL_QSL_rcvd what

Thanks Art. I overlooked the "ambiguous" BS! I mistakenly figured that since DXView was picking up FJ as St. Barts that everything was working fine. Now that I think about it, the very first time I

FireBrick wrote: They are FETs stuffed into a glass bottle. 73, -- Ken K4XL k4xl@... *** BoatAnchor Manual Archive *** On the web at http://bama.sbc.edu and http://bama.edebris.com FTP site

Do what Im gonna end up doing. Run 2 monitors. LOL Sparky KC4ART

I haven't read this entire thread closely, but if you have noise that far off center, my guess is the cause is the LSB setting on the FT1000MP receiver. If you're trying to receive FSK, push the

Thanks a lot, Dave. This will make entering QSOs from my old paper logs much smoother! 73, John, K8AJS bastinj@...

Hi Art, I you hold the Control key and then remove the additional panels (uncheck the radio buttons) the screen will stay the same size. 73 Art W2NRA "Keep to the code!" w2nra.com

Art, Is this true for all FJ prefixes or just TO5FJ? Since the French will issue the TO prefix temporarily to DXPeditions operating from any of several different countries it's not possible to assign

Hi Art My last post, to Andy, works for you too. The TO5 prefix for the callsign TO5FJ is an ambiguous French prefix and does not indicate St. Barts. You'll have to add TO5FJ on the

Hi Andy, The TO5 prefix for the callsign TO5FJ is an ambiguous French prefix and does not indicate St. Barts. You'll have to add TO5FJ on the Entity Overrides tab of SpotCollector or DXView. 73 Art

I agree with you Rich, but there are times when a number of those need to be open at the same time - like when checking in a batch of bureau cards. You'll need the QSL panel, Awards panel, etc.

If you check all the same boxes in the opposite order, what happens then? I think you will find that it has nothing to do with the details panel but will happen with any panel that would cause the

Hi there, I made the correct install of DXCC-database 2.2.3. according to dxlab-wiki. Works OK, but I didn't get spots from TO5FJ in the correct color (I need it red, but it's still in black. I made

I found the error. I had an additional empty line at the bottom. Deleted, everything fine. 73, Andy idea why...

Hi Andy, What have you got the resolution of your monitor set to? I also have the a 22 inch wide screen monitor and I don't see the problems you described. I have mine set to 1680 by 1050

Lamp bases. Danny Douglas N7DC ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB All 2 years or more (except Novice) Pls QSL direct, buro, or LOTW preferred, I Do not use, but as a courtesy

That's pretty much what mine does as well. The monitors I use in the shack have much higher resolution and more "depth" i.e., they show a lot more from top to bottom. The one in the family room is