At least on OM figured it out, I can connect to WFview software to 7610 works great:

+ AA6YQ comments below There is a path shown in DXVIEW that has an empty terminus on one end and does not correspond to a known QSO. How can this be removed? + What actions are you taking to cause

There is a path shown in DXVIEW that has an empty terminus on one end and does not correspond to a known QSO. How can this be removed? Many thanks, John K8UMF

Hard to understand ICOM here. A good reason not to buy one. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb

# more AA6YQ comments below # From Icom management in response to my request for documentation of the IC-7610's LAN port protocol: "While the CI-V protocol is published, the server protocols for the

+ AA6YQ comments below I would like to have commander connect to 7610 thru ethernet connection and then send UDP info to my amp. + Commander does not support the control of an IC-7610 via its LAN

+ AA6YQ comments below I have a different issue, on importing 18853 from Log4OM, 17712 have JJ00aa in grid1 field. They are not duplicate QSO. All earlier QSOs have also been filled with this grid. I

+ AA6YQ comments below but this might be what you need: https://qsl.net/n3pkj/dxkeeper/ + As described here, there are two different approaches to interoperation between WSJT-X and DXLab: direct,

+ AA6YQ comments below Can someone point me to a tutorial on what is required to automatically log contacts to DXKeeper? + From which source(s)? 73, Dave, AA6YQ

I would like to have commander connect to 7610 thru ethernet connection and then send UDP info to my amp. I can get other programs to work thru the the 7610 network interface but so far no luck with

Hi, I have a different issue, on importing 18853 from Log4OM, 17712 have JJ00aa in grid1 field. They are not duplicate QSO. All earlier QSOs have also been filled with this grid. I then cleaned up

Dave, while it is not the automatic switching I was looking for it is a very good way to organize all my Nets. Thank you very much. 73 Rory W4RJG

So SORRY, My FAULT, MK II was not switched on. Please forgive me Carlo IK2RPE Da: DXLab@groups.io <DXLab@groups.io> Per conto di Carlo - IK2RPE via groups.io Inviato: venerdì 16

Win 10. Just made updates. (KB5017308, cumulative for Win 10 V. 21H2 and KB5017500, cumulative of .NET framework 3.5, 4.8, 4.8.1) Commander (v. 15.5.1) does not read any longer frequency. Nothing

log contacts from where? during contests, we use N1MM to log directly to dxkeeper using the n1mm-dxkeeper bridge... ( http://www.dxlabsuite.com/N1MM-DXKeeper/index.htm ) wsjt can log directly stand

Can someone point me to a tutorial on what is required to automatically log contacts to DXKeeper? Thanks

+ AA6YQ comments below Love seeing all the help going on. I have an ic7100 and find win4icom works well with DxLabs. Another software is ic7100bkt. Not as feature rich, and graphics work but not

Hi all, Love seeing all the help going on. I have an ic7100 and find win4icom works well with DxLabs. Another software is ic7100bkt. Not as feature rich, and graphics work but not as smooth.

+ AA6YQ comments below For the progress window, make the modes user selected to any valid mode recognized by DXLab and changeable at any time, i.e. not require restarting DXView to take effect. +

Noted. Many thanks, Joe and Jerry for the remedy. Only been trying that other software less than a month to "see" .what it does.