DXLab@groups.io | Messages

Home Messages Hashtags

Messages

Between

and

Is it possible to have DXKeeper running on one computer in a network and having different computers on the same network, possibly using different programs, etc. send logging information via TCP/IP or

By K7IU - Marv · #209673 ·

Re: Chromebook

I knew there had to be a catch. Thanks for the info. Julio

By Julio Peralta · #209672 ·

Re: Chromebook

BUT, they do not run windows so not possible. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb

By Gilbert Baron W0MN · #209671 ·

Re: Chromebook

They're Linux dumb terminals that must be connected to the cloud to the cloud to operate. Won't work. If you want a cheap computer look at refurbs from TigetDirect Buck,

By Buck · #209670 ·

Chromebook

Has anyone had any experience using a Chromebook to run DXLabs and maybe a connected radio. They seem to be very inexpensive but they have 3 or 4 USB ports to interface with and the specs didn’t

By Julio Peralta · #209669 ·

Re: dxlab commander to rf2k interface

+ AA6YQ comments below + I'm glad to hear that it worked, Murf. Kudos to the N1MM developers for establishing a standard UDP format for realtime radio updates. Enjoy! 73, Dave,

By Dave AA6YQ · #209668 ·

Re: dxlab commander to rf2k interface

Thanks guys for all the help and tip My first time using UDP. I was able to find what the PI address was in the RF2K-S. I think that was the hardest part learning how to do that. Once I found my IP

By Pat · #209667 ·

Re: Rotor Control Question

+ AA6YQ comments below + So you'd like the option to have antenna selection be automatic as a function of your transceiver' current band as reported by Commander? + Were you able to download and link

By Dave AA6YQ · #209666 ·

Re: Rotor Control Question

Dave, Thanks for the quick response. I had read the referenced documents and had hoped there was something I was missing. Guess I am always asking a "one-off" question. Rick N0YY

By Rick Heinrich · #209665 ·

Re: Rotor Control Question

+ AA6YQ comments below My station has a yagi and a rotatable dipole on the mast. The rotatable dipole is parallel to the boom of the yagi. I am assuming that I can use the "Alignment Panel" to

By Dave AA6YQ · #209664 ·

Re: Default QSL Message not being retained

+ AA6YQ comments below Thanks for the response, Dave. I followed your instructions as outlined below. I am noticing that the Default QSL message is not retained even if I just simply close

By Dave AA6YQ · #209663 ·

Rotor Control Question

My station has a yagi and a rotatable dipole on the mast. The rotatable dipole is parallel to the boom of the yagi. I am assuming that I can use the "Alignment Panel" to select an offset for the

By Rick Heinrich · #209662 ·

Re: Default QSL Message not being retained

Thanks for the response, Dave. I followed your instructions as outlined below. I am noticing that the Default QSL message is not retained even if I just simply close DXKeeper, and don't change

By Ken Bandy, KJ9B · #209661 ·

Re: Default QSL Message not being retained

+ AA6YQ comments below I am using a workspace, and that thought crossed my mind as well. I have updated the W9ISF workspace a couple of times after setting the default message. Doing so had no

By Dave AA6YQ · #209660 ·

Re: Default QSL Message not being retained

Hi Joe. I am using a workspace, and that thought crossed my mind as well. I have updated the W9ISF workspace a couple of times after setting the default message. Doing so had no change in the

By Ken Bandy, KJ9B · #209659 ·

Re: Default QSL Message not being retained

Ken, Are you loading a workspace at startup? If so, is the default QSL message stored in that workspace (did you update the workspace after setting the default QSL message)? 73, ... Joe, W4TV

By Joe Subich, W4TV · #209658 ·

Default QSL Message not being retained

Good morning, Dave. I have recently stumbled onto an issue that may or may not be a problem. With the annual special event that I host, I always have the default QSL Message set up in DXKeeper with

By Ken Bandy, KJ9B · #209657 ·

Re: Rotor control using ARCO with Orion

ARCO needs an IP address, Port and Control Protocol specified on the Settings -> LAN tab. If using IP, DXView Rotator Control tab needs the IP Address and Port in the ARCO box and either Arco Hygain

By Joe Subich, W4TV · #209656 ·

Re: Rotor control using ARCO with Orion

i see i used hygain to talk to the rt21,,,,,, thanks On 8/9/2022 6:05 PM, Dave AA6YQ wrote:

By bill steffey NY9H · #209655 ·

Re: Rotor control using ARCO with Orion

+ AA6YQ comments below + The OR2800 rotator controller does not use either the Hygain protocol or the Yaesu protocol. + When controlling an ARCO via TCP, you must specify both the Host Address and

By Dave AA6YQ · #209654 ·

6081 - 6100 of 215640

Home Hashtags About Features Pricing Updates Terms Help Twitter