+ AA6YQ comments below While looking for the ERRORLOG.TXT file I got sidetracked and compared my files in the Spotcollector Databases folder to a recent backup. The backup had several more files so I

Problem solved after a fashion. Using a TQSL tbk restored the deleted Station Locations, then was able to LoTW upload. Midnight Thursday got FCC email that I'd been successful despite all odds (<5%)

Jim, you can change the UDP base port in PstRotatorAz to something like 10000 then in N1MM+ you can change the UDP Rotor port to 10060 that should solve the issue. The 12060 UDP port being used in

I recently resumed using rotor control program PstRotatorAz including its SteppIR Controller window. I just tried N1MM-DXKeeper Gateway, after not using it for a long time, and found it couldn’t

Dave - While looking for the ERRORLOG.TXT file I got sidetracked and compared my files in the Spotcollector Databases folder to a recent backup. The backup had several more files so I overwrote the

<markmu.Boeing747@...> wrote: Yes, yes, yes. GM8ARV's guide is the best. For goodness' sake, don't pay for a time sync program when NTP (W3HCF's DARPA project) is free. Windows'

* more AA6YQ comments below Yes, please, Dave + If some or all of your logged QSOs do not specify a DISTANCE item, DXKeeper can compute them for you en masse; if you'd like to do this, let me know

The often used NTP Setup Instructional Guide has just recently been updated by Mr. David Taylor. Found at the below SatSignal website. https://www.satsignal.eu/ntp/setup.html --73 de Mark ..w2or..

+ AA6YQ comments below Ok…I checked the Details box to make the Details panel visible and looks like DIST is blank even though logs have grid squares and lat/long info. + Does the QSO in question

Is there an errrorlog.txt file in your SpotCollector folder? If so, please attach it to an email message, and send the message to me via aa6yq@... 73, Dave, AA6YQ

Thank you, Joe, it sounds good. I found where the Gateway can be downloaded. I’ll look into it. 73, Art W2NRA CWOPS OPS #1955

Art, as a side note, if you are using N1MM+ to log the CWT you can also use N1MM DXKeeper Gateway to automatically log each CWT QSO as you work them. I use this feature all the time and it eliminates

Ok…I checked the Details box to make the Details panel visible and looks like DIST is blank even though logs have grid squares and lat/long info. What am I doing wrong? Does it need to recalculate

This morning Spotcollecter came up with a layout of just two rows or boxes with just two in each row. It connects to my spot source but the blue 'Autoscroll' label with the line through it just keeps

Yes, please, Dave + If some or all of your logged QSOs do not specify a DISTANCE item, DXKeeper can compute them for you en masse; if you'd like to do this, let me know and I'll show you how. Carlo

I HAD missed Step 11, but got the rest of it done by researching the WIKI. Thanks again! Earl

# More AA6YQ comments below + AA6YQ comments below <snip> I guess one day I'll get all these functions working. + The functions all work now, but they require your logged QSOs to contain the

+ AA6YQ comments below Having only ever had wire antennas, I never put in a direction that my antenna was pointed -- short path, long path, etc. + You can use the "Modify QSOs" panel to set ANT_PATH

I guess one day I'll get all these functions working. You're right, Dave. I apologize, my choice of words was unfortunate and reflected badly on your product. As usual, it's great, I just don't

Already found it, thanks Robie! Having only ever had wire antennas, I never put in a direction that my antenna was pointed -- short path, long path, etc. Earl