This version - in the QRZ panel on the Configuration window's Callbook tab, expands the name of the "Ignore geocoded grid squares" option to "Ignore geocoded grid squares, latitudes, and

+ AA6YQ comments below I am seeking several variations of WAS from my new QTH, and am wondering how I could use SpotCollector to help... Any ideas of how to display STATE for a US State? and even

I am seeking several variations of WAS from my new QTH, and am wondering how I could use SpotCollector to help... Any ideas of how to display STATE for a US State? and even better, if it is needed

+ AA6YQ comments below If you want a display of previously worked stations, look into JT-Alert. + Step-by-step instructions are

+ AA6YQ comments below I have a large group to upload to Lotw. They all load fine into my computer. If I try to upload them one of the QSOs stops the whole process. + What does "stops the whole

# AA6YQ comments below + WSJT-X does not provide any other way of conveying a "decoded callsign of interest" to another application. With the WSJT-X "Double click on call sets TX enable" option

If you want a display of previously worked stations, look into JT-Alert. 73, ... Joe, W4TV

Hi Dave, I have a large group to upload to Lotw. They all load fine into my computer. If I try to upload them one of the QSOs stops the whole process. I think one QSO somehow doesn’t have a

+ WSJT-X does not provide any other way of conveying a "decoded callsign of interest" to another application. With the WSJT-X "Double click on call sets TX enable" option disabled, it takes only one

+ AA6YQ comments below This also happened in June. Uploading LOTW causes a duplicate QSO, I think because one QSO somewhere in my 74,549 QSOs has no data or Callsign and DXKeeper adds the next QSO

Hi Dave, This also happened in June. Uploading LOTW causes a duplicate QSO, I think because one QSO somewhere in my 74,549 QSOs has no data or Callsign and DXKeeper adds the next QSO and creates a

+ AA6YQ comments below I like this function, i.e. the interoperation between WSJT-X and Spotcollector and those which are possible by this interoperation, e.g. direct logging into DXKeeper, DXView

Don't be so sure about that! I started on 6m in 2005 with a 6M5 Yagi at 35', and using SSB and CW, I managed to get to about 70. I went QRO to 1500W, changed the 6M5 out for a 6 element LFA, and this

I like this function, i.e. the interoperation between WSJT-X and Spotcollector and those which are possible by this interoperation, e.g. direct logging into DXKeeper, DXView information populated etc.

+ AA6YQ comments below I'm trying to understand the difference between ODX and OMDX. Looking at: KX4I on 50313.0 in FT8 at 8/4/2022 1510Z (K: United States) ODX is shown as 325 and OMDX is

I'm trying to understand the difference between ODX and OMDX. Looking at: KX4I on 50313.0 in FT8 at 8/4/2022 1510Z (K: United States) ODX is shown as 325 and OMDX is 500. Looking at the definitions --

OK thanks Dave, that explains it! All the best Alan VK2ATW

+ AA6YQ comments below + Commander does not provide the ability to switch its Secondary CAT port between RX and TX. The Secondary port is intended to support connection to a second radio that tracks

+ AA6YQ comments below + Take a look at the Wiki Article I cited. If that doesn't make the corrective action clear, let me know. 73, Dave, AA6YQ

Hi everyone Would appreciate some help please. I have Commander setup to work with Thetis SDR software using TCP/IP. Works very well, no problems. I am starting to experiment with Vara AC using the