+ AA6YQ comments below + Take a look at the Wiki Article I cited. If that doesn't make the corrective action clear, let me know. 73, Dave, AA6YQ

Hi everyone Would appreciate some help please. I have Commander setup to work with Thetis SDR software using TCP/IP. Works very well, no problems. I am starting to experiment with Vara AC using the

Thanks Dave Yes to TQSL Station Location. Which is what I changed. Probably too soon. In court tomorrow and at Pacific DX Conv this weekend. If I can let me put it on hold til next week when I'll have

+ AA6YQ comments below + Yes. See the explanation, screenshots, and step-by-step instructions in https://www.dxlabsuite.com/dxlabwiki/DXCCUserSelectedDigitalMode 73, Dave, AA6YQ

+ AA6YQ comments below + With WSJT-X directly interoperating with DXlab, any station decoded by your instance of WSJT-X will be conveyed to SpotCollector as a "local spot" with your callsign as the

HI All…Just wondering if there is a way to change the Progress window in DXView to show FT8 Instead of PSK??? I personally don’t operate PSK but would like to see my progress in FT8. Thanks 73

Hello all…..I just managed to get FT8 running here with WSJT and I have linked it to DXKeeper through Spotcollector to transfer my logged contacts from WSJT to DXKeeper automatically. However, I am

+ AA6YQ comments below windoss 11 + Thanks, Dwight. If I understood your private email correctly, you were able to increase the size of the displayed text - but not enough to suit you. You can

windoss 11 On 8/3/2022 12:40 PM, Dave AA6YQ wrote:

+ AA6YQ comments below You are exactly right Gil. I have two 32 inch screens and two 27 inch screens, plenty of real estate. And, all the windows are plenty big, including Commander, it's just that

You are exactly right Gil. I have two 32 inch screens and two 27 inch screens, plenty of real estate. And, all the windows are plenty big, including Commander, it's just that it's

I did have it checked! All fixed now. Thanks, Dave. -- 73, Charles N2SO

I think he wants the change ONLY in the one spot. I understand though why that ability would be low or zero on the list. I think maybe a much larger monitor would be a good but expensive solution.

+ AA6YQ comments below + If you configure Windows to increase the size of information displayed on-screen by following the directions cited in https://groups.io/g/DXLab/message/209451 + to "make

+ AA6YQ comments below + In the General panel on the General tab of DXKeeper's Configuration window, do you have the "New QSO on DX Spot activation" box checked? If so, uncheck it. 73,

Hi Dave, I am running Window 11 Pro on X64 based PC with i5-8400 CPU, 16GB Ram. All DXLab programs are updated and running including DXKeeper's (corrected) Version 16.6.6. When I double-click on a

Well thanks for the suggestions. As previously I had played with all those window things, some very interesting effects to say the least. But the one thing I wanted, was either to

+ AA6YQ comments below New QTH's in TQSL threw a monkey wrench in DXK's LoTW upload feature. I have set QSL config to the new TQSL QTH ID. + There is no "QTH ID" in TQSL. Are you referring to a

New QTH's in TQSL threw a monkey wrench in DXK's LoTW upload feature. I have set QSL config to the new TQSL QTH ID. I have deleted MYQTHID from affected Q's made from the new QTH whose TQSL ID I

Thanks Joe! 73 de Dave, W5SV