+ AA6YQ comments below This also happened in June. Uploading LOTW causes a duplicate QSO, I think because one QSO somewhere in my 74,549 QSOs has no data or Callsign and DXKeeper adds the next QSO

Hi Dave, This also happened in June. Uploading LOTW causes a duplicate QSO, I think because one QSO somewhere in my 74,549 QSOs has no data or Callsign and DXKeeper adds the next QSO and creates a

+ AA6YQ comments below I like this function, i.e. the interoperation between WSJT-X and Spotcollector and those which are possible by this interoperation, e.g. direct logging into DXKeeper, DXView

Don't be so sure about that! I started on 6m in 2005 with a 6M5 Yagi at 35', and using SSB and CW, I managed to get to about 70. I went QRO to 1500W, changed the 6M5 out for a 6 element LFA, and this

I like this function, i.e. the interoperation between WSJT-X and Spotcollector and those which are possible by this interoperation, e.g. direct logging into DXKeeper, DXView information populated etc.

+ AA6YQ comments below I'm trying to understand the difference between ODX and OMDX. Looking at: KX4I on 50313.0 in FT8 at 8/4/2022 1510Z (K: United States) ODX is shown as 325 and OMDX is

I'm trying to understand the difference between ODX and OMDX. Looking at: KX4I on 50313.0 in FT8 at 8/4/2022 1510Z (K: United States) ODX is shown as 325 and OMDX is 500. Looking at the definitions --

OK thanks Dave, that explains it! All the best Alan VK2ATW

+ AA6YQ comments below + Commander does not provide the ability to switch its Secondary CAT port between RX and TX. The Secondary port is intended to support connection to a second radio that tracks

+ AA6YQ comments below + Take a look at the Wiki Article I cited. If that doesn't make the corrective action clear, let me know. 73, Dave, AA6YQ

Hi everyone Would appreciate some help please. I have Commander setup to work with Thetis SDR software using TCP/IP. Works very well, no problems. I am starting to experiment with Vara AC using the

Thanks Dave Yes to TQSL Station Location. Which is what I changed. Probably too soon. In court tomorrow and at Pacific DX Conv this weekend. If I can let me put it on hold til next week when I'll have

+ AA6YQ comments below + Yes. See the explanation, screenshots, and step-by-step instructions in https://www.dxlabsuite.com/dxlabwiki/DXCCUserSelectedDigitalMode 73, Dave, AA6YQ

+ AA6YQ comments below + With WSJT-X directly interoperating with DXlab, any station decoded by your instance of WSJT-X will be conveyed to SpotCollector as a "local spot" with your callsign as the

HI All…Just wondering if there is a way to change the Progress window in DXView to show FT8 Instead of PSK??? I personally don’t operate PSK but would like to see my progress in FT8. Thanks 73

Hello all…..I just managed to get FT8 running here with WSJT and I have linked it to DXKeeper through Spotcollector to transfer my logged contacts from WSJT to DXKeeper automatically. However, I am

+ AA6YQ comments below windoss 11 + Thanks, Dwight. If I understood your private email correctly, you were able to increase the size of the displayed text - but not enough to suit you. You can

windoss 11 On 8/3/2022 12:40 PM, Dave AA6YQ wrote:

+ AA6YQ comments below You are exactly right Gil. I have two 32 inch screens and two 27 inch screens, plenty of real estate. And, all the windows are plenty big, including Commander, it's just that

You are exactly right Gil. I have two 32 inch screens and two 27 inch screens, plenty of real estate. And, all the windows are plenty big, including Commander, it's just that it's