Dave, thanks for the reply but let this be my official request for a future update. + That's Enhancement # 1742 in the DXKeeper Enhancement

You do have the option to edit anything that's being sent to DXKeeper from WSJT-X if you have the "Log QSO" panel appearing from WSJT-X. You can then edit power, time, etc, before you click

Dave, thanks for the reply but let this be my official request for a future update. 2nd question, however, I see no way too update the QSO power (the default) reported to DCKeeper after it’s

You could allow a multiplier for amp users. Of course there would need to be a way to know if amp was in use. I would like this as I often have logged the wrong power. Probably not a high priority

+ AA6YQ comments below I am a new user of DX labs. When I change the RF power on my Yaesu FT 991A , and complete a QSO, the power recorded when the completed QSO Is sent to DX keeper the recorded

I am a new user of DX labs. When I change the RF power on my Yaesu FT 991A , and complete a QSO, the power recorded when the completed QSO Is sent to DX keeper the recorded power remains at the

Dave W0RX, >My next step is to improve my antenna switching as I cannot listen on both rigs simultaneously yet. {shameless plug follows} The latest version of the freeware FreqEZ Band

via the Databases tab of DXView's Configuration window. Terminate DXKeeper and SpotCollector before directing DXView to update these databases. 73, Dave, AA6YQ

+ AA6YQ comments below + As described in "Primary CAT Port switching" section of https://www.dxlabsuite.com/commander/Help/ControllingMultipleRadios.htm + Commander can rapidly switch among 4

I use a Flex 6400M and an Icom 7610. Just set up as per DXLab documentation and they both work flawlessly. I also use a MicroHam u2R for the control lines. Everything plays great

My main radio is a Flex 6600 and has worked fine for a long time with Commander. I have added a FTDX10 to the shack that I also want to control with Commander. I have read thru the "Controlling

I am watching and hoping for the 27 day repeat. I erected my 30 ft FD tower and new 5 element yagi on July 2nd. I am using RAT to follow my progress. Since July 2nd I have worked 45 states, 10

Stan, you can do it ! You have your "home garden" of Carribean and South America, and it will help very much increasing the number. I work 6m since the year 2000 with a 1/4 wave vertical and 100w, and

It is now and that fixed it. Thanks Dave. 73, Dale AA1QD

+ AA6YQ comments below + Is the "Capture Location Info from Notes" option enabled on the Configuration window's General

With the IOTA contest going this weekend I see lots of spots for IOTA stations with IOTA number in the spot comments but the IOTA column in SC never populates with an IOTA number. I've searched the

Hi Dave, Interesting. I have DXCC on 80, 40, 30, 20, 17, 15, 12 and 10 meters, but I've only worked 15 DXCC entities on 6 meters. That was using FT8 with 100 watts and a hex beam. I guess DL is the

Check Windows printer configurations. To see if Microsoft has helped you recently by changing your configurations. I prefer to use the Control Panel's Devices and Printers. However, in Windows-10

The K3NG board should work more easily on a (current) Yaesu rotator than on a CDE/Hy-Gain rotator since the Yaesu does not have a brake and the direction pot is isolated. However, to the best of my

As every DXer, his/her immediate family, and close friends know, radiation from our sun -- the "solar flux" -- ionize atoms and molecules in the earth's ionosphere, making it more reflective of HF