Gil, that may be an over-reaction. BitLocker has been around since Windows 8 and is a good thing if you want to protect your personal data. I believe MS announced some time ago that

Where under settings do you find this? Hard to stay ahead of what Microsoft is doing to you that you don't know about. K5FUV

Microsoft has decided to automatically turn on data encryption in Windows! 11. Not sure if on home but I read an article by the reporter on Minneapolis paper that it did on his home edition. THEY DO

Hello, here is some additional info: 1. In between I have seen that the prefilter was enabled. After disabling it 2m-spots are displayed as well. But: 2. After having rbn.dr4.w.de activated in

Dave, unfortunately I did not identify, which version of Commander I was using when I reported the problem in interoperation of my FT5000 with CW Skimmer/Skimmer--to-Commander and Commander last

Hello, I have following problems with my present SC setup (modes and bands, origin etc set to ALL): 1. My telnet cluster rbn.dr4w.de (port 7300) shows all the FT8 spots in SC's telnet cluster window

Thanks, Dave, to you and Joe W4TV. I'll review the references once again. Your comment re Chrome is interesting; I use Firefox and have noticed the same thing. "Obnoxious RAM greed." ;<)

+ AA6YQ comments below + No, that won't be implemented until Elecraft can loan me a K4. + Response time as measured between which events, exactly? 73, Dave, AA6YQ

Is there a way to have DX commander use a K4's IP address for CAT control instead of a serial port. In testing Hamlib's support for this, I see a significant decrease in response time. In hamlib, I

+ AA6YQ comments below See <http://www.dxlabsuite.com/dxlabwiki/GettingStarted> for information on optimizing SC Performance by limiting database size, etc. + The article to which Joe W4TV refers is

You have identified your own problem .... Q > 400 or 500 indicates a backlog of 400 - 500 spots. I saw the same thing regularly this weekend with all the SSB spots for CQWW. As soon as the clock

I'm finding SC is not working well for me -- I'm guessing I have a setting or two screwed up. Here's what I see: - The "Q" often exceeds 400, sometimes 500. The "Q" often turns red. The "Q" always

...via the Databases tab of DXView's Configuration window. 73, Dave, AA6YQ

+ AA6YQ comments below Tnx and I've been putzing with those as well. I'll get a combination that makes sense for me. Reason for my approach is that I have very detailed filters set in CC User and

+ AA6YQ comments below I've quite likely set a hidden filter to cause my 'hiccup', but have not been able to find it or a solution ... "so far". + There are no "hidden filters" in SpotCollector.

+ AA6YQ comments below I just upgraded to windows 11 and can't get commander to connect . I get the Invalid port number (8002) error. What do you suggest? + "Invalid port number" means exactly

If true (I have not seen tyis luckily) it is a horrible defect in Windows. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb

Some but not all Windows major upgrades have a habit of rearranging your Ports and Sound devices. Open windows Device Manager and go down to ports and see what and where the new installation of

Hi Markku, WSJT-X does not use or understand messages like "K1ABC RR73; F1XYZ <P5DX> -10" in normal FT8 mode, they are not used except by Fox stations in FT8 DXpedition Mode. One of the features of

+ AA6YQ comments below + Are you anti-malware applications configured to consider each of your amateur radio applications to be "safe" -- including each of your DXLab applications and applications