Could this be the issue? Did you make this change from the dxlab setup info? https://www.dxlabsuite.com/dxlabwiki/SatelliteTracking Continuous Tracking By default, SatPC32 only conveys information to

+ AA6YQ comments below + DXKeeper does include the CREDIT_GRANTED field when exporting an ADIF file using the Main window's "Export QSOs" tab, but does not include this field when uploading a QSO to

+ AA6YQ comments below I'm trying to configure the integration shown in https://www.dxlabsuite.com/dxlabwiki/SatelliteTracking to convey satellite information from SatPC32 to Commander and on to

I'm trying to configure the integration shown in https://www.dxlabsuite.com/dxlabwiki/SatelliteTracking to convey satellite information from SatPC32 to Commander and on to DxKeeper. I'm using SatPC32

As reported off-line, ClubLog's grid square map is very buggy. 1) It does not reflect grids (I've only checked on 6m) confirmed or verified by card (QSL_RCVD= Y or V) 2) It does not show as

+ Who would use this capability if it were provided? Well, obviously I would :-) ! But seriously, I think the growing number of hams doing remote operation would be interested in this capability.

+ AA6YQ comments below The integration of DXKeeper with ClubLog Grid Square map works very well, and the resulting feature is really interesting. To make it perfect, I think that DXK should change

+ AA6YQ comments below I must have missed a box to check or other omission but <CTRL> click does nothing when trying to change antenna preset values. I must have missed something. Thanks in advance

+ AA6YQ comments below There is no such scenario. Sorry for the confusion. What I would like to achieve is to have instances of Commander, WinWarbler and WSJT-X to be running at the same time without

I must have missed a box to check or other omission but <CTRL> click does nothing when trying to change antenna preset values. I must have missed something. Thanks in advance for any help! John K8UMF

There is no such scenario. Sorry for the confusion. What I would like to achieve is to have instances of Commander, WinWarbler and WSJT-X to be running at the same time without adding one more

Fixed. Thanks Norm WA4ZXV -- ..Norm -- Norm WA4ZXV EM73vw

+ AA6YQ comments below I think I added the new location and grid to LOTW, but I don't find a place to tell DXLabs to use the new location. Can someone point me in the right direction + Step-by-step

+ AA6YQ comments below Have a similar question, is there a way to make Commander, WinWarbler and WSJT-X working at the same time without adding an extra serial connection for WSJT-X? + Please

+ AA6YQ comments below That's really all I need for my current operating conditions, thx. Out of curiosity, are there any other clients that could operate this way (just the client + UDP)? If

# more AA6YQ comments below + 100% of DXCC credits granted to LoTW confirmations will auto-link with no manual intervention. 132 of 133 did in this case. The one that didn't was an unusual case in

132 of 133 did in this case. The one that didn't was an unusual case in that I had logged two QSOs with the station, same band and mode but 8 minutes apart. The report said DXKeeper couldn't tell

+ AA6YQ comments below If you are using WSJT-X just click in the call area and hit F4 , this clears the call from WSJT-x and DX Labs will follow. + On DXView's Main window, clear the

+ AA6YQ comments below I was able to complete my application using only LoTW. It was processed within a couple of hours. No problems downloading or linking DXCC credits in DXKeeper. + 100% of DXCC

Mike, If you are using WSJT-X just click in the call area and hit F4 , this clears the call from WSJT-x and DX Labs will follow. Gordon - N1MGO