+ AA6YQ comments below + By that, I assume you mean that when you didn't see K3S in Commander's Radio Model selector, you incorrectly assumed you had an obsolete Radios.txt file, and "brought over"

+ AA6YQ comments below + You could continue to use your log by reverting to the previous version of DXKeeper, but if you place your log file in a zip archive, attach the zip archive to an email

I just performed and upgrade from DXLab Launcher and one of them was a log update now my log won't open I get this messages ( Existing fields were not successfully updated due to an error noted in the

I reported here on two threads that GridTracker was the culprit. Yes.

Yes Dave. Brought over obsolete radio.txt. I will try to find current list. When I reinstalled DXL Suites, I thought any file like that would get an update. I will search web for current file.

yes. All suites installed and up to date. Cannot find K3s in Commander>config>rGeneral>radio dropdown. + K3 is the correct entry to select. There has never been a K3S entry. 73,

yes. All suites installed and up to date. Cannot find K3s in Commander>config>rGeneral>radio dropdown.

+ AA6YQ comments below Hi. Suffered a fatal hd crash. Installing DXL on new PC. Rig is K3s. I do not see it in DXK Radio Config drop down. I see KENWOOD option. Since Elecraft choice is

Thanks, Leo! I will issue an updated Pathfinder search for 425 DX News. Dave

Did you direct Launcher to update the other applications? Bruce - K5WBM

Hi. Suffered a fatal hd crash. Installing DXL on new PC. Rig is K3s. I do not see it in DXK Radio Config drop down. I see KENWOOD option. Since Elecraft choice is KENWOOD,or K2 is that the right

Bernard, good morning. I do believe you have limited your connection by not defining the correct subnet range. Your subnet mask should be 255.255.255.0. This should match your configuration of

My initial thought is you have made this too complicated. Why not use an Ethernet switch and put everything on the same IP subnet? It is possible to put two NICs in a PC and make it work but I

I installed a Remote connection between my DX 1200 PA and my Win10 Computer The Remote SW works in principal, but after a certain time following Error message appears and stops the communikcation:

yes, I've studied documentation. It works fine now -- 73 de Leo IZ5FSA

# more AA6YQ comments below Thanks Dave. I only use VSPD on the laptop to create a 2nd port. # That's unnecessary. Just connect your IC-7300 to your laptop with a standard USB A-B cable.

Thanks Dave. I only use VSPD on the laptop to create a 2nd port.

+ AA6YQ comments below + No. As documented here https://www.dxlabsuite.com/dxkeeper/Help/Items.htm#QTH + DXKeeper uses the QTH item to record your QSO partner's city or town. 73,

+ AA6YQ comment sbelow + That won't work. You should not use VSPD or any other "virtual port" software in this scenario. A. When you connect your IC-7300 to your PC, it's device driver will create a

+ AA6YQ comments below I had this error for the first time - shortly after installing Gridtracker (earlier this week). The DXKeeper error code was: 2021-06-08 19:07:21.192 > Common.GetFileFromURL