@ more AA6YQ comments below + The situation you describe is identical to a spot from the DX + Cluster: there's no guarantee that you can hear that station. The + fact that the station is QRV on

the earnest DXer. Indeed, and I had thought of that. It's just that with the "spot" essentially coming from my own radio, another useful bit of information (namely, whether the station is being

Thanks, Dave! I'll assume that you'll be implementing Q65 support in the same way you have implemented support for the other ADIF submodes; please let me know when that's been completed so that I can

+ AA6YQ comments below I just got WSJTX set up to directly interface with Spot Collector. I like it - it's slick. One quibble I have - I've noticed that with audio alarms in SpotCollector set to

I just got WSJTX set up to directly interface with Spot Collector. I like it - it's slick. One quibble I have - I've noticed that with audio alarms in SpotCollector set to Need & Filtered, I'm

+ AA6YQ comments below SKCC Logger puts the QSO partner's SKCC number in a SKCC tag (e.g. <SKCC:5>1817T). When importing this ADIF file to DXKeeper, I want the value in the SKCC tag to go into

SKCC Logger puts the QSO partner's SKCC number in a SKCC tag (e.g. <SKCC:5>1817T). When importing this ADIF file to DXKeeper, I want the value in the SKCC tag to go into

Ahhh I see what I might have forgotten.. will check settings in internet explorer

OK Disregard one of the TLS settings was uncheck... ahhh how fast we forget.. Jim K3ybn Dave et.al. I am again getting the dreaded 12157 error. I recognize what it is and verified it by looking in

In case anyone imports QSO data from Ham Radio Deluxe logbook: - I investigated why some QSO's exported from HRD logbook (latest v6.7.0.323) caused the J00aa locator when imported into DXKeeper. - I

Dave, Up to this point in time, eQSL.cc has required QSOs made in "ADIF Submodes" like FT8 and FT4 to be submitted to eQSL.cc as Modes, e.g. <MODE:3>FT8 and <MODE:3>FT4 despite the fact that

I forwarded an email I had received from eQSL to you Dave. I dont know much more than that. When I try and upload the Q65 contacts in DXKeeper to eQSL, I get a eQSL problem report back stating Bad

@ AA6YQ comments below I have been using the “Identifying Special Callsigns” feature (http://dxlabsuite.com/spotcollector/Help/ConfigurationSpecialCallsigns.htm) of SpotCollector with good

I would go Ryzen these days... possibly 3700x. That said; don't be disappointed if it doesn't resolve the CW Skimmer issue. I've found it unusable recently when there are other apps running (some

+ AA6YQ comments below I am looking to get a new computer for my shack. Currently I use a Thinkpad Laptop with an Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz with 2 cores, 16Gb of Memory, and an Intel

I am looking to get a new computer for my shack. Currently I use a Thinkpad Laptop with an Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz with 2 cores, 16Gb of Memory, and an Intel HD Graphics on board. My

That doesn't solve the problem, which was to show only CWOps members *on CW, who have not been worked before on CW* (but also show other stations who are Needed on other modes). I can't think of any

Hi Dave I got it going. so case is solved. Tnx Dave NU4N -- 73's de NU4N Dave

+ AA6YQ comments below For the USA-CA award that I am pursuing, is there a way/place where to indicate the already submitted, accepted, verified counties as iI do, for example for IOTA, WAS, WAZ.

+ Please place your log file (pathname specified in the "Log file" panel on the Configuration window's log tab) in a zip archive, attach the zip archive to an email message, and send the message to me