+ AA6YQ comments below Ok, I shall check Windows event log, but it seems everything works as before, without any problems. Thanks for your response! + A problem that occurs once will recur until we

Ok, I shall check Windows event log, but it seems everything works as before, without any problems. Thanks for your response!

+ AA6YQ comments below + Each sequence can specify up to 64 instructions; it's unlikely that you or anyone else will ever have to employ all of them. 73, Dave, AA6YQ

OK, a little painful but it works. If my scripts are short enough I think I'll use every 2nd or 3rd line and leave empty lines when I experiment with scripts in the future. -- 73, Norm/KC1BMD

+ AA6YQ comments below The debug log data indicates the radio is sending data to Commander roughly every 200ms (4 times in a minute that was observed) which is what the interrogation interval was set

The debug log data indicates the radio is sending data to Commander roughly every 200ms (4 times in a minute that was observed) which is what the interrogation interval was set for. I believe (but

+ AA6YQ comments below Change "add" to "insert". + Copy/paste instructions downward to free the necessary space. 73, Dave, AA6YQ

Change "add" to "insert". -- 73, Norm/KC1BMD

If you need to add a few lines due to error in logic what's the best way to handle it? -- 73, Norm/KC1BMD

AA6YQ comments below Is there a way to cut/paste multiple lines in a command sequence? I'm looking for an easy way to insert/delete multiple lines without editing the underlying saved text file. +

Is there a way to cut/paste multiple lines in a command sequence? I'm looking for an easy way to insert/delete multiple lines without editing the underlying saved text file. Also, is there a way to

I got the results Dave, thanks. I mentioned previously that I set it to 100ms and I 'believe' I got another CAT error but it took a while. I'll monitor it at 100ms again and then try 75ms, maybe 50ms,

+ AA6YQ comments below Had same problem yesterday and today. It has not happened before in the several days I've been running it. The only difference I can determine is that it started after I

+ AA6YQ comments below Data sent in e-mail. + Received. I responded via email with the details. The executive summary: with the Command Interval set to 200 ms, the maximum time between frequency

Thanks Joe! I will change that default. I've never used the WinWarbler Audio Recording feature and the name of the folder (DXLabs) wasn't much of a clue as to what its purpose was or where to go to

It is the storage location for WinWarbler's Audio Recording feature. You can define the directory in WinWarbler -> Config -> General. Click the Audio Recording button (QSO Audio folder). 73, ...

check out MoRTTY, its a small arduino based keyer that emulates Winkeyer or TinyFSK, depending on the sketch

+ AA6YQ comments below is it possible to setup FSK RTTY via Winkey? + No. If not, will it be supported in the future? + You are the first to request this capability. In DXLab, unimplemented

+ AA6YQ comments below I'm going to try rs232 to DXLabs Commander. I have the cable here and an open 232 port on the pc. Just haven't found the back of the amp. No easy job to move it. I'll post

+ AA6YQ comments below No error log. Sorry + "No error log" means that SpotCollector detected nothing abnormal. + An upgrade to a new version simply provides new .exe files; it has no impact on