Yes, mine is set at 5 sec. 73, ... Joe, W4TV

I'm going to try rs232 to DXLabs Commander. I have the cable here and an open 232 port on the pc. Just haven't found the back of the amp. No easy job to move it. I'll post my results. Norm WA4ZXV

No error log. Sorry

+ AA6YQ comments below + Is there an errorlog.txt file in your SpotCollector folder? If so, please attach it to an email messsage, and send the message to me via aa6yq (at) ambersoft.com+ Locate the

I found that in the SC config, Spot Sources, WSTJ-X was not enabled. I have not touched this setting, so something happened when I updated SC (or maybe update of Windows). But now the SC_WSTJ

Maybe this is a problem with Spotcollector and not the Windows update, because Spotcollector was updated today with version 8.8.3?

After my latest Windows 10 update, the SC_WSTJ does not start when Spotcollector starts. I have to start SC_WSTJ manually from the filesystem. (Sorry, wrong program name in the subject header)

Hi Rich. You have to make sure that there is a space before LIKE in those expressions. ie. "APP_DXKeeper_USER_DEFINED_0LIKE" should be "APP_DXKeeper_USER_DEFINED_0 LIKE" I don't know if the criteria

+ AA6YQ comments below + Ok. So we can see what's going on, please do the following: 1. on the General tab of Commander's Configuration window, check the "Log debugging info" box 2. terminate

[KC1BMD] It is disabled. -- 73, Norm/KC1BMD

Hi Joe, Correct, all new Acom 2000A's have shipped with the new RCU since around 2012. However, you can buy the new RCU separately for $800 at any time for those who have the old RCU and want to

Thanks. I didn’t read the note that says to increase the time from the default of 2 seconds if a check fails error appears. It’s good to have more than one eye taking a look. I’ll give it a

In JT Alert ... Settings -> Manage Settings -> Logging Increase the time in the "Check QSO Log Record" box. Apparently your system is slow and does not respond quickly enough when JT Alert tries to

I assume all new Acom 2000A amplifiers include the new RCU. At least they are shown that way at DX Engineering and Ham Radio Outlet. I do not see any option to purchase just the RF deck without the

+ AA6YQ comments below I’m new to this group, how to I contact Laurie? Can you provide email? + I provided the URL to the JTAlert support group in the last sentence of my previous

# more AA6YQ comments below # A Commander errorlog.txt file that captures a "CAT error" would reveal whether Commander really went 1 second without sending a frequency update. Do you have your

+ AA6YQ comments below + I found several documents describing the protocol for the older Acom 2000A. The older amplifier does not accept a "set frequency" command; it accepts commands to control

[KC1BMD]: Acom support said the amp wants to see frequency/band data for auto-band-switching at least once per second, otherwise it will produce CAT errors. As far as I can tell, the band switching

I’m new to this group, how to I contact Laurie? Can you provide email? Michael Fehrenbach W9MRF

Thanks Joe, to add to my original post about the old RCU, I use the 3-wire DB9 cable from RS232 on the back of the amp to a USB serial adapter db9 (FTDI chip), it must be using only pins 2,3, and 5