+ AA6YQ comments below Yes I do. But a number of entries have been entered before I realized I had an issue + Since you don't know what damage was done to your current log, I suggest that you 1.

Yes I do. But a number of entries have been entered before I realized I had an issue :-(

+ AA6YQ comments below On the main log QSOs. I have question on 2 of the fields. One labeled RX Freq in the QSO block and the other labeled ADDR in the QSL block. Where did the DXKeeper get the

On the main log QSOs. I have question on 2 of the fields. One labeled RX Freq in the QSO block and the other labeled ADDR in the QSL block. Where did the DXKeeper get the information from and

+ AA6YQ comments below I have the same problem as Kent, if you use the space to change fields, the same thing happens, works fine (in my case Pathfinder to perform "lookup" operations) but you lose

+ AA6YQ comments below There are times when I want to toggle off spots on my SSDR displays coming from SC to see just spots from N1MM+'s Telnet function. To do so I switch off

Dave, I have the same problem as Kent, if you use the space to change fields, the same thing happens, works fine (in my case Pathfinder to perform "lookup" operations) but you lose the focus.

Hi Dave, There are times when I want to toggle off spots on my SSDR displays coming from SC to see just spots from N1MM+'s Telnet function. To do so I switch off Commander>Config>Bandspread>Display

+ AA6YQ comments below Given I do not know which qsl have been changed by my niece, I do not know from which date she 'submitted' from I assume that it was qso dated after Jan 1st. The ask is to

Walt, the ARRL has daily bulletin service in RTTY from W1AW. Check the ARRL web site for the schedule. The Reverse Beacon Network also spots RTTY, but in my experience activity

Given I do not know which qsl have been changed by my niece, I do not know from which date she 'submitted' from I assume that it was qso dated after Jan 1st. The ask is to create an sql (spell check

+ AA6YQ comments below + The new "Operation log" added in Gateway1.1.6 may be responsible for that; I will investigate... 73, Dave, AA6YQ

Dave While using the gateway, if I enter a callsign in N1MM and hit enter the info is populated in N1MM but then the focus goes to the gateway application. I have to click on the N1MM log window so I

+ AA6YQ comments below + In the Sort panel in the lower-left corner of the "Log QSOs" tab on DXKeeper's Main window, select "UTC". 73, Dave, AA6YQ

Dave- Thank you for your quick response for the update to N1MM to DxKeeper Gateway. I'm trying it out now and really like the new log feature. One issue though. I get a popup from DXkeeper "there is

+ AA6YQ comments below + The annotated picture of WinWarbler's Main window in <https://www.dxlabsuite.com/dxlabwiki/RTTY_Operation> + shows a RTTY signal in its waterfall display. 73,

The ARRL sends bulletins in multiple formats—including digital (RTTY). http://www.arrl.org/w1aw-operating-schedule#digital 73, Dave, w6de

Using DXLabs Suite and I would like to try my hand at some RTTY. (Been doing PSK31 and FT8/FT4) Old Navy radioman and cut my radio teeth on RTTY. Is there a regular RTTY broadcast of some kind that

AA6YQ comments below + I don't understand what "set WAS qsl as submitted" means. Please explain. + Which panel was cleared? Can one help me to reset all eligible qso from 1/1/2020 + I don't

Ok, with no comment..... My 7 year old niece was playing my laptop (when we were not on lockdown).. I think most of you know the end results. The end result she set WAS qsl as submitted and then