I decided to sell my Elecraft K3 and revert back to my FT-1000D. The K3 was integrated very well with DX4Win, LP-Pan, NaP3, and CW Skimmer. The FT-1000 with it's limited CAT commands was more of a

When I click on VE CB for a Canadian call sign I get access denied on the cdn gov't web site. When I click on RAC button I get an error message path not found d:\ (DLL version 9). I think those is

Disregard the "monitor: comment; meant the PF Button fill in. - Alan k9MBQ

+ AA6YQ comments below I am referring to the Grid Computation on the "my QTHs" tab (after pushing the "New" button). Lat/Long can be entered in a Decimal-Degree format (which is very nice). The

+ AA6YQ comments below + Only Icom transceivers have a CI-V address. It's not necessary to specify one for other manufacturer's models like your Yaesu FT-891. 73, Dave, AA6YQ

Thanks Dave. I think I got it pretty close. I know the HEX for the 7300 is 94, however I'm not sure what to put in for they Yaesu 891. I have the User-Defined Control set working on the 7300. Thanks

+ AA6YQ comments below I've configured both my IC 7300 and FT 891 as Multi Radios in Commander. It was simple enough to do. I haven't found a way to have User Defined Profiles for each radio when I

I've configured both my IC 7300 and FT 891 as Multi Radios in Commander. It was simple enough to do. I haven't found a way to have User Defined Profiles for each radio when I switch back and forth.

Thanks Iain. I missed the "consider gridsquares" check box, but it's checked now. I only import .adi contest logs from N1MM+ into DXKeeper, so I set the time span to whatever the length of the

+ AA6YQ comments below Hi guys.....I am busy importing paper logs into DXlabs and I am wondering when I log a US station, where can I input the state abbreviation so that I can see it in the "state"

Roger. I think I would have been up fairly quickly as well had I not let the Staples Techs move DXLab files from what was supposed to be a Clone backup drive to the computer after they had to

All true but it could be very wrong. If you are entering manually and especially if old contacts you had better enter this information actually since the lookup is the current or latest updated data

Hello Ted, The state is stored in the primary subdivision field (pri sub). The display will change the field label based on the DXCC entity of the call entered. The secondary subdivision would be used

Hi guys.....I am busy importing paper logs into DXlabs and Iam wondering when I log a US station, where can I input the state abbreviation so that I can seeit in the “state” column of the

+ AA6YQ comments below Dave - Tks. Took care of the PF Script error message problem and will pursue the Blank Button issue per the web site suggested. Also re-did the Launcher paths as you advised

Dave - Tks. Took care of the PF Script error message problem and will pursue the Blank Button issue per the web site suggested. Also re-did the Launcher paths as you advised and all seems OK. I think

Dave: I am referring to the Grid Computation on the "my QTHs" tab (after pushing the "New" button). Lat/Long can be entered in a Decimal-Degree format (which is very nice). The grid is then computed

+ AA6YQ comments below Apologies, I fell behind on following my own suggestion. But the comments are correct. POTA and the park reference go into the special interest group fields of the MyQTH and

+ AA6YQ comments below I note an apparent glitch with the Grid computation from Lat/Long. It can be replicated as follows: Lat: 45.9997 Long: -115.0808 Should be: DN25lx DXKeeper: DN26la It

+ AA6YQ comments below Dave - apparently I am doing something wrong w/ the Workspace. When I select Folder in the Workspace box and click Load Settings I get a Registry Editor Box with a question: Do