Dave, Following up. My computer "lock up" problem (which you advised is a lack of resources) occurred frequently in July and August. I posted here on August 26,

I don't use Pathfinder, I just set up the callbook in DXKeeper's config file to HamQTH (once you've initially logged in) and have never had a problem. HamQTH reports on virtually all call

Hi, Would anyone be able to help with some information regarding the automatic downloading of eQSL images? I have about 1,200+ eQSLs at eQSL.cc which is a lot to download manually and label.

+ AA6YQ comments below I thought you should know, given that the buttons are there. + The RAC button will work if you have the "Radio Amateur's Callbook" installed on your computer, and Pathfinder

NW. I thought you should know, given that the buttons are there. Thanks for all the work you do. DEC for YORK & DURHAM Region ARES. ASEC GTA ARES section M: +1-416-876-2979 H: +1-416-227-1414 E:

+ AA6YQ comments below The Canadian government did not remove the online directory. They changed its address to <https://apc-cap.ic.gc.ca/pls/apc_anon/query_amat_cs$.startup>. Be warned, it's not

It was a heads up for the users of the software Thanks for the additional info. DEC for YORK & DURHAM Region ARES. ASEC GTA ARES section M: +1-416-876-2979 H: +1-416-227-1414 E: va3bxg@... WL:

The Canadian government did not remove the online directory. They changed its address to <https://apc-cap.ic.gc.ca/pls/apc_anon/query_amat_cs$.startup>. Be warned, it's not very fast. RAC callbook -

+ AA6YQ comments below When I click on VE CB for a Canadian call sign I get access denied on the cdn gov't web site. + In 2017, the Canadian government removed the online directory of Canadian

+ AA6YQ comments below Perhaps this is a bit off thread. I have a 756Pro that interfaces to sound card and CI-V interface to ATEN USB/Serial port. DXLabs reads it - it works with WSJT, etc.

+ AA6YQ comments below I decided to sell my Elecraft K3 and revert back to my FT-1000D. The K3 was integrated very well with DX4Win, LP-Pan, NaP3, and CW Skimmer. The FT-1000 with it's limited CAT

Hi Roger, both applications are expecting to talk to a serial device, not another application, the only way you can connect them back-to-back is to loop pair of serial devices. Com0Com emulates a

Hi all: Perhaps this is a bit off thread. I have a 756Pro that interfaces to sound card and CI-V interface to ATEN USB/Serial port. DXLabs reads it – it works with WSJT, etc. Everything

I decided to sell my Elecraft K3 and revert back to my FT-1000D. The K3 was integrated very well with DX4Win, LP-Pan, NaP3, and CW Skimmer. The FT-1000 with it's limited CAT commands was more of a

When I click on VE CB for a Canadian call sign I get access denied on the cdn gov't web site. When I click on RAC button I get an error message path not found d:\ (DLL version 9). I think those is

Disregard the "monitor: comment; meant the PF Button fill in. - Alan k9MBQ

+ AA6YQ comments below I am referring to the Grid Computation on the "my QTHs" tab (after pushing the "New" button). Lat/Long can be entered in a Decimal-Degree format (which is very nice). The

+ AA6YQ comments below + Only Icom transceivers have a CI-V address. It's not necessary to specify one for other manufacturer's models like your Yaesu FT-891. 73, Dave, AA6YQ

Thanks Dave. I think I got it pretty close. I know the HEX for the 7300 is 94, however I'm not sure what to put in for they Yaesu 891. I have the User-Defined Control set working on the 7300. Thanks

+ AA6YQ comments below I've configured both my IC 7300 and FT 891 as Multi Radios in Commander. It was simple enough to do. I haven't found a way to have User Defined Profiles for each radio when I