+ AA6YQ comment sbelow I went through Dave's lengthy method to move DXLab to a new PC with Windows 10. Good news: all went well. Bad news: SpotCollector opens with an error message that an old

I went through Dave's lengthy method to move DXLab to a new PC with Windows 10. Good news: all went well. Bad news: SpotCollector opens with an error message that an old BandModes text file it is

ARRL will not address 60 meters until there are statistics to value it's use. NR1DX's comments are valid. If DXab, or some some other recording mechanism, could accumulate statistics on the value

Tried a couple of QSOs. No change in the LotW sent field, it remains U. Steve, K8JQ

+ AA6YQ comments below + OK. Locate the Log Page Display entry for one of the QSOs in the group that you say was uploaded but not accepted by LoTW. Right click it and select "update from LoTW" from

+ AA6YQ commetns below On Thu, May 21, 2020 at 02:51 PM, Fred - NA2U wrote: + Set the "QSL Via" panel to LoTW. 73, Dave, AA6YQ

My usual method is to filter the Log QSOs tab, then on the QSL tab => Add Requested => Upload to LotW => Sync LotW QSOs => Sync Lotw QSLs. This won't work because when I click Add Requested

Option 1, Steps 1 and 2 If I set QSL via to QSL cards I do not get an “Update from LOTW” button. I’ll add that the list shows the last failure before the current one was 7/10/18. 73

+ Aa6YQ comments below A CWT is a "CW test". A one hour CW contest that runs three times on Wednesdays. I usually make about a hundred contacts. As far as I am aware, the logs for the three CWTs have

A CWT is a "CW test". A one hour CW contest that runs three times on Wednesdays. I usually make about a hundred contacts. As far as I am aware, the logs for the three CWTs have the same

Thanks for sending me your log, Don. 1. Your log contains 19 empty QSOs, each with no callsign, band, mode, date, or time. An empty QSO is created when you click the New button on the Main window's

* more AA6YQ comments below that does seem to be unconfirmed so far but I'll bet that is exactly what they will require. They are very strict on that with paper QSLs and I doubt that will change. Is

Hi Dave Ok thanks, I didn't know about the default ADIF value, will see what they have to say to that. 73, Herman / PA3BFH Op 21-5-2020 om 22:55 schreef Dave AA6YQ: -- Herman van den Berg /

+ AA6YQ comments below #117,118 + So the question is, which will be faster: A. 6590 individual requests sent to LoTW to report a QSO's status so that DXKeeper can update each one B. Directing

Hi Dave, that does seem to be unconfirmed so far but I'll bet that is exactly what they will require. They are very strict on that with paper QSLs and I doubt that will change. Is all too common for

+ AA6YQ comments below What I need is the option "N" in the QSL rcvd Box... It is available in the QSL sent box, but for what I want to do the QDure system triggers on the QSL rcvd Box. QSL rcvd = Y

+ AA6YQ comments below Would it be possible to add 60Mtrs to the DXView Info tables? + It is certainly possible, but I will not do so: I agree with the ARRL that 60m is too narrow a band for DXing

#below. I,too, was surprised by the large number. I don’t understand why. 73 from the desert, Fred/NA2U #117,118 ____________________________________________________________ Sponsored by

+ AA6YQ comments below I made some contacts in each of the three CWTs yesterday. + What's a CWT ? Uploaded to LotW per the instructions on UploadLotWLogPageDisplay - DX Lab Suite Wiki

+ AA6YQ comments below Since GlobalQSL seems to have stopped working I'm checking other QSL services. The QDure sytem by the Spanish club URE (https://qsl.ure.es/en/) is one of these. I sent a