So I'm sitting here playing with WinWarbler and PSK-31. Very nice! I haven't used it much because I have FLdigi working fine but I need a bridge software to log contacts. I was considering buying HRD

Sent reply to ambersoft alongwith errorlog. Com 21 was port assigned to DXView Rotator Control. Changed DXView Rotator port to None. I use PSTRotator AZ app which is assigned to to Com 9. There

Check the "Rotator Control" tab. Uncheck "Enabled" and "Enable at startup", and set the Serial Port Interface / Port to "None" (assuming you're not using it). 73, ~iain / N6ML

Thanks Dave. I just did that. DXView is the suite associated with com port error. I don't see the com port designation in DXView Config. Furthermore DXView launches nd seems to work. Jim

+ AA6YQ comments below When I start launch of DXL suites, I am now getting message "Com port 21 is unavailable". I do not have a com port 21 installed on pc. I cannot detect which suite is looking

+ AA6YQ comments below I have been using DXLab for a short time now and am quite happy with it's performance. I have downloaded some of the command sequence and slider functions and all are working

When I start launch of DXL suites, I am now getting message "Com port 21 is unavailable". I do not have a com port 21 installed on pc. I cannot detect which suite is looking for that port. I am not

GM to all, I have been using DXLab for a short time now and am quite happy with it's performance. I have downloaded some of the command sequence and slider functions and all are working as advertised.

Wow. Great Jim. I love it when I learn something in these forums! THANKS!! -- 73 Bob KD7YZ AMSAT LM #901

In the batch file for JTAlert, you could add before the command to run JTAlert the line TIMEOUT 3 which will pause for between 2 and 3 seconds before running the next command. And try different values

+ AA6YQ comments below hi at all, what is the problem of this: + That looks like a failure of the Jet database engine, possibly caused by a hardware failure. I suggest that you check the Windows

hi at all, what is the problem of this: 2020-04-25 05:48:45 > SpotCollector version 8.5.0 2020-04-25 05:48:45 > App.Path : C:\DXLab\SpotCollector 2020-04-25 05:48:45 > App.exe

+ AA6YQ comments below In a Feb. event, I operated from my Home Station using a 2nd call (Station Call Sign was changed to K1FOC) And logged ~150 QSO's sequentially over a 2-day period...into my

Hello Dave & the group, In a Feb. event, I operated from my Home Station using a 2nd call (Station Call Sign was changed to K1FOC) And logged ~150 QSO's sequentially over a 2-day period...into my

+ AA6YQ comments below Just curious if I've missed a setting or something "obvious" - but obviously not to me.... Syncing LoTW QSLs and returning to my log page shows the newest confirmations at the

Hi Jim lemme see what I put in the two batch files: to get wsjtx going ----------------------------------- @ECHO OFF COLOR 0A CD /D "C:\WSJT\wsjtx\bin\" REM -- CD /D "C:\WSJT\wsjtx\bin\" Start

Just curious if I've missed a setting or something "obvious" - but obviously not to me.... Syncing LoTW QSLs and returning to my log page shows the newest confirmations at the bottom of the log

If you have the time and energy then full new install is the way to go. I avoid it if possible because it is a really REALLY LARGE PITA to get all applications back with all settings. I avoid it like

Another way to do this, I am able to launch JTAlert from DXLab using the following two line JTAlert.bat file. cd "C:\Program Files (x86)\HamApps\JTAlert" "C:\Program Files

My preferred approach for OS "upgrades" is to install a new drive (SSD, these days - I actually do a mirror across two SSDs for important systems), do a fresh OS install, then install