+ AA6YQ comments below How can I get the Commander module to not check off the Interrogation square? For some reason my K3 will not work after a while with the Interrogation checked off. I have to

+ AA6YQ comments below when LOTW was down I stopped automatically uploading , after each qso. Club log kept working along fine. I was able to set up the "auto loading" to LOTW after they got it

+ AA6YQ comments below My DXKeeper awards recompute function used to be "instantaneous", but now it is very slow. Here is one data point: QSO ends 13:37:00; recompute finishes 13:40:00. While the

How can I get the Commander module to not check off the Interrogation square? For some reason my K3 will not work after a while with the Interrogation checked off. I have to do a reset and it will

when LOTW was down  I stopped automatically uploading , after each qso. Club log kept working along fine. I was able to set up the "auto loading" to LOTW after they got it fixed.  I must have

Pete, You don't want to prefix otherwise good log entries with !. A ! before the call sign indicates that the QSO in question is not valid for awards. The Upload to Club Log button under the Check

You shouldn't need to do anything special to upload the corrected entries. From the Check Progress tab click the upload button in the Club Log panel. This will upload any newly added or changed

If you've configured DXKeeper for upload to Club Log [1], you'd just need to make sure that "Club" is set to 'M' (in the Auxiliary panel) for those QSOs, then click on "Upload" in the Club Log panel

I recently uploaded my entire 164K QSO DXKeeper log to Clublog. They responded with 19 exceptions, some of which I have deleted or corrected in DXKeeper, and now I would like to

Hi Everyone: My DXKeeper awards recompute function used to be "instantaneous", but now it is very slow. Here is one data point: QSO ends 13:37:00; recompute finishes 13:40:00. While the recompute is

I believe the only place it needs to be updated in is TQSL. Neil, KN3ILZ -- This email has been checked for viruses by AVG. https://www.avg.com

FWIW ... also check the privacy settings for your Microphone, as it appears that M$ is trying to 'help' you by turning off stuff you turned on. Check to make sure that WSJT-X still has

+ AA6YQ comments below + Thanks, Dave! That article is now accessible via <https://www.dxlabsuite.com/dxlabwiki/WindowsTricks> 73, Dave, AA6YQ

Have Windows-10 stop updating device drivers automatically. https://www.windowscentral.com/how-disable-automatic-driver-updates-windows-10 Choose the “How to stop updates for drivers with Windows

+ AA6YQ comments below I have a new updated callsign certificate but I don't see where to update it in DXLAB. Also, they offered the alternative to have no password and I chose that option. +

Pretty certain this gets updated in the eqsl app....

+ AA6YQ comments below After successfully printing almost a thousand QSLs using the DXKeeper's 'Print QSL cards' feature I'm now running into a problem of quality and its not a printer issue. When I

Dave, I have a new updated callsign certificate but I don’t see where to update it in DXLAB. Also, they offered the alternative to have no password and I chose that option. Cordially, Mike

Thanks to everyone for the helpful information. I will see if I can do a better job of documenting the serial port information. I may try to if I can get details at the hardware level that I can use

After successfully printing almost a thousand QSLs using the DXKeeper's 'Print QSL cards' feature I'm now running into a problem of quality and its not a printer issue. When I view the background