+ AA6YQ comment below its all back and correct!! + Good! Now be sure to make a backup at least once a week, and retain the last 4 backups. Configuration window, Log tab, Backup button. + And

AS Dave suggested I started with COMMANDER. I use WIN4Yaesu to control my FTdx5000. I connected Commander to one of the WIN4 com0com ports. Since I know nothing abt DXKEEPER I connected LOGic 9 to

THANK YOU THANK YOU EVER SO MUCH !!! thanks for fixing my mess you are the best Dave !!! its all back and correct!!

+ AA6YQ comments below I'm using the programs that came on the original CD - and updates to the microHam program that you alerted me to. I will send you all my version(s) information separately,

I'm using the programs that came on the original CD - and updates to the microHam program that you alerted me to. I will send you all my version(s) information separately, Joe. I can't believe this

+ AA6YQ comments below Was hitting the wrong tab. Your suggestion of the temp swap of VFO's works fine. Thanks. + Ah, you were clicking the XFC button instead of the "M x S" button; I'm glad it's

+ AA6YQ comments below Congratulations, Dave! This award is so well-deserved!! DXLab is superb, as is your helpful support to all of us out here using your great suite of programs! + Thanks,

+ AA6YQ comments below There is no way to thank Dave enough for all the work he does! But I'll say THANK YOU DAVE anyway. He has spent a lot of time helping me with both direct answers and pointing

Was hitting the wrong tab. Your suggestion of the temp swap of VFO's works fine. Thanks. Stuart VK6MK

Congratulations, Dave! This award is so well-deserved!! DXLab is superb, as is your helpful support to all of us out here using your great suite of programs! - 73 and good DX de Mike, K6MKF, NCDXC

There is no way to thank Dave enough for all the work he does! But I'll say THANK YOU DAVE anyway. He has spent a lot of time helping me with both direct answers and pointing out the right sections

Hi Dave Both his K3 and my K3 are using the latest firmware. He has a K3 with a serial port. I have a K3s with a USB connection. I see the same behavior on both. I'll do the debug test shortly. Test

+ AA6YQ comments below Dave your going to have to build an additional "trophy room" when you keep getting these. Congrats on this recognition from the ARRL, for all your help. + Thanks, Danny!

+ AA6YQ comments below I m a long time (almost from the beginning) continuous user. I can attest that Dave has NEVER wavered in his dedication and support of this outstanding program. Simply the

+ AA6YQ comments below All apps updated so using latest versions of all DXlabs modules. I'm new to Winwarbler for CW and setting it up for a friend. I'm using XCVR CTRL App for interfacing to the

Dave your going to have to build an additional "trophy room" when you keep getting these. Congrats on this recognition from the ARRL, for all your help. N7DC@... Ex

I never said I was using Winkey. I'm using XCVR control App, AKA Commander. Jim

If you are using XCVR CTRL App, you are not using the WinKey. WinKey requires a *separate* serial port for WinWrbler to communicate with the WinKeyer. Select "WinKey" in the "Keying" box on the

Yes, I and many other users are running on Win 10 1909 without issue. You may have an antivirus program interfering with the Eltima VSPAX drivers used to create the virtual ports or another virtual

I’m a long time (almost from the beginning) continuous user. I can attest that Dave has NEVER wavered in his dedication and support of this outstanding program. Simply the BEST! Congratulations