Hello fellow DVKeeper users I have just uploaded my logs for the recent Russian RTTY contest to LoTW and eQSL. My next task is always to check the US contacts to see if there are any of the 27 US

Gpredict can do transceiver and rotor control, I've never used it to do such but I have a copy running on a Raspberry PI if you want me to test anything. 73 Jeff kb2m

Hi Dave, I've noticed that DXView's GeoMag>max box doesn't ever seem to populate regardless of what entity is being looked up. For example, SP to Japan crosses northern latitudes from my QTH but no

After formatting my C: drive and re-install Win10 I re-install in E:\HAM\DX Lab Suite the DXLaucher and he re-install all the other programs (they wasn't deleted because they are on the E: drive) no

+ AA6YQ comments below I particularly enjoy the feature set of gpredict. Have a peek here https://sourceforge.net/projects/gpredict/ It has fairly active development having been most recently

Hi, Dave, all; I particularly enjoy the feature set of gpredict. Have a peek here https://sourceforge.net/projects/gpredict/ It has fairly active development having been most recently revised around

+ AA6YQ comments below + Thanks, John! 73, Dave, AA6YQ

A possible good reference https://www.pe0sat.vgnet.nl/satellite/sat-information/tracking/ https://www.amsat.org/amsat-new/tools/software.php At one time I used a Dos based instatrack it was a

While at the Northeast HamXposition today, I spent some time at the N1T satellite station with Fred AB10C, a long-time DXLab user. This station was controlled by MacDoppler running on an Apple

+ AA6YQ comments below I'm open to suggestions of other sat tracking options that work with dxlabs packages... + The question is whether there's a "better" satellite tracking application that's

I'm open to suggestions of other sat tracking options that work with dxlabs packages...

Should anyone else make the same mistake I did, let me post what happened after I responded to Dave's request above which resolved my confusion (there was no real problem). As you can see, Dave had me

* More AA6YQ comments below Dave, as an alternative to "Sat mode" support for the FT-847, you might want to consider a "SatPC32" transceiver (that would provide a generic satellite support). Two

* more AA6YQ comments below Sorry, should have addressed that in my initial post. I have noticed it before. I can't say for sure that it's always been the case but it has often been the case. I

Sorry, should have addressed that in my initial post. I have noticed it before. I can’t say for sure that it’s always been the case but it has often been the case. I also should have mentioned

+ AA6YQ comments below I’m noticing lots of spots that survive my SC filter setup (Continent and Orgin and (Age < 60 minutes)) aren’t plotted on the DX-Atlas map but many are. DXView Config>Plot

+ AA6YQ comments below Unlike N1MM+ and wsjt-x where N1MM+ suspends its polling and accepts frequency from wsjt-x, Commander is *never* "passive" - Commander is *always* polling for frequency,

+ AA6YQ comments below Looking over the 847 cat commands on page 92 of the 847 user guide, The only thing I see missing is a way to query sat mode status... + A description of "Satellite Mode" is

+ AA6YQ comments below What I was asking was could dxkeeper auto populate the rx/tx freqs from the last logged qso on this satellite... This way, once I log a qso on satellite (x), each subsequent

Hi Dave, I’m noticing lots of spots that survive my SC filter setup (Continent and Orgin and (Age < 60 minutes)) aren’t plotted on the DX-Atlas map but many are. DXView Config>Plot