Dave, w5sv, To prevent this from happening in the future disable driver updates in Windows update using group policy. Instruction are

Thanks for sending me the Commander errorlog.txt file, Ron. Here's the directive that SpotCollector is sending to Commander when you double-clicked on the Spot Database Entry for a station operating

+ AA6YQ comments below @@ No change. No switch over. + Ok. That means something is preventing Commander and WinWarbler from communicating. I have noticed that DXLab applications have to start

Daryl, What is the *MODE* setting on the PTT tab in WW CONFIG? 73, ... Joe, W4TV

Dave, I have done this and repeated the test. See @@ below. On 7/19/2019 11:33 PM, Dave AA6YQ wrote: @@ No change. No switch over. I have noticed

That is not correct. When Menu 60 is LSB, the FTdx3000 should be reporting CW-L as CW and CW-U as CW-R. I think Dave requested that you enable debugging in Commander/SC and perform/capture a series

So many people spot FT4/FT8 QSOs as either CW or RTTY. How can I make a "filter" to exclude the areas of the bands that have FT8/FT4 activity? Thanks, OK, back in my hole, Ron, KU7Y Mountain Home,

My Oops! Memory failed again. My FTdx3000 has been boxed up for 2 years now replaced by 7300 and 7610. 73 art w2nra

Joe is right. I have Menu #60 set to LSB. This gives the tuning I want. When I start Commander the Mode shows as CW-R, which is correct. If I try to change the Mode to CW using Commander it does not

Thanks, that did it!

Hi Dave, often deleting the offending device from Device Manager then restarting to get the drivers automatically reinstalled sorts things like this out. -- 73 Bill G4WJS.

One tool is COM Name Arbiter Setter V0.9 see <https://www.uwe-sieber.de/misc_tools_e.html> you may need something different, but COM name arbiter generally fixes Windows update created problems on

early this morning, Windows tried to install (but failed) 2019-07 Cumulative Update for Windows 10 Version 1803 for x64-based Systems (KB4507435). As a result, I have lost my virtual com ports... in

Actually, the FTdx3000 default CW mode *IS* USB. MENU 060 CW BFO USB/LSB/AUTO DEFAULT= USB Selecting AUTO will make CW = LSB on 160/80/40 and USB on 30 and above. Selecting LSB will select LSB

Hi Ron, The Yaesu FTdx3000’s default CW mode IS LSB so you need to choose the CW setting (not CW-R) in DXLab software. This will give you “Tune up frequency to raise side-tone frequency

This is the test on which we are currently focused. After you configuring your anti-malware to consider WinWarbler and Commander to be safe, please repeat it: 1. make the General tab of Commander's

@ answer below @   All I have is Advanced System Care and Windows Defender. Commander and WW were not in the Defender list.   I added them, restarted the PC and tried the test of WW Start and

~ more AA6YQ comments below %�� I does not. ~ That means something on your system is preventing WinWarbler from communicating with Commander. ~ Have you configured your Firewall and

% N8AID answer below. %   I does not.

! more AA6YQ comments below