Hello Art, yes i know that I'm can grab the bottom of the Capture window or pull it out to get the User define back But Im think it is not possble to hide the Grid 2 and 3, 4 . tnx for the Answer

I happen to have a mechanical Geochron. I bought mine at a flea market for $50. A little clean up and it works fine.. You can find them out in the wild occasionally. It makes for a nice

Right answer k4ia, Buck K3# 101 Honor Roll 8B DXCC EasyWayHamBooks.com

When connected to my PC (running Windows 7) via USB, my IC-7300 creates COM6; this appears in the Windows Device Manager's Ports section as "Silicon Labs CP210x USB to UART Bridge". If I turn off the

+ AA6YQ comments below Similar (?) with FT-991A. The virtual com ports have to be reinstalled. + Under what circumstances do the virtual com ports have to be reinstalled? 73,

Similar (?) with FT-991A. The virtual com ports have to be reinstalled. Buddy (360) 440-0190 K7DBH

+ AA6YQ comments below I and Ross Slater have finally figured out why my operational port on commander would change every time I would cycle the radio and power supply off and back on. + Your

+ AA6YQ comments below I don't have DXView controlling my rotator - It's all done manually here, so that’s why I’m interested in seeing the AZ. My DXView Heading panel shows 66. + DXView will

I and Ross Slater have finally figured out why my operational port on commander would change every time I would cycle the radio and power supply off and back on. I find that when I shut down the

Thanks for the errorlog files, Mark and Mike. WinWarbler populates its "QSO Info" panel's Az item with your antenna's actual heading, not with a short-path or long-path heading computed from the

+ AA6YQ comments below If I double click on a unique call in SC about half the time the info is not sent to WW or DXK from a QRZ XML lookup. The call sign shows up but not the name or other info. +

Geochron 4K is a software package that will run on a Windows computer. In order to read the fine details (City/place names) you will need a 4K TV or monitor exclusively dedicated to that software

I rebooted the pc and have [CC,DXK,DXV] showing in the WinWarbler top bar.   When I type AA6YQ  enter, DXV shows the short and long bearings   37   217   and WWarbler poulates the state MA

If I double click on a unique call in SC about half the time the info is not sent to WW or DXK from a QRZ XML lookup. The call sign shows up but not the name or other info. Thanks 73 Kent N6WT

+ AA6YQ comments below Dave have you had a chance to see the Geochron 4K video world map? I wonder if there would be anyway to plot QSO info or maybe SC data from DXLabs on that map. Wouldn't that be

+ AA6YQ comments below Recently had to send my K3 in for repair- so have had to put my kx3 into service as main shack radio for 2-3 weeks. Using it with a SignalinkUSB and all is working fine with

Dave have you had a chance to see the Geochron 4K video world map? I wonder if there would be anyway to plot QSO info or maybe SC data from DXLabs on that map. Wouldn’t that be cool. Julio, W4HY

+ AA6YQ comments below I've seen this as well and have wondered if I had WinWarbler mis-configured. I'm sure I've missed something. I just performed Dave's suggested procedure and do not have AZ

I've seen this as well and have wondered if I had WinWarbler mis-configured. I'm sure I've missed something. I just performed Dave's suggested procedure and do not have AZ in the QSO info pane

Recently had to send my K3 in for repair- so have had to put my kx3 into service as main shack radio for 2-3 weeks. Using it with a SignalinkUSB and all is working fine with WSJTX and FT8. But