Similar (?) with FT-991A. The virtual com ports have to be reinstalled. Buddy (360) 440-0190 K7DBH

+ AA6YQ comments below I and Ross Slater have finally figured out why my operational port on commander would change every time I would cycle the radio and power supply off and back on. + Your

+ AA6YQ comments below I don't have DXView controlling my rotator - It's all done manually here, so that’s why I’m interested in seeing the AZ. My DXView Heading panel shows 66. + DXView will

I and Ross Slater have finally figured out why my operational port on commander would change every time I would cycle the radio and power supply off and back on. I find that when I shut down the

Thanks for the errorlog files, Mark and Mike. WinWarbler populates its "QSO Info" panel's Az item with your antenna's actual heading, not with a short-path or long-path heading computed from the

+ AA6YQ comments below If I double click on a unique call in SC about half the time the info is not sent to WW or DXK from a QRZ XML lookup. The call sign shows up but not the name or other info. +

Geochron 4K is a software package that will run on a Windows computer. In order to read the fine details (City/place names) you will need a 4K TV or monitor exclusively dedicated to that software

I rebooted the pc and have [CC,DXK,DXV] showing in the WinWarbler top bar.   When I type AA6YQ  enter, DXV shows the short and long bearings   37   217   and WWarbler poulates the state MA

If I double click on a unique call in SC about half the time the info is not sent to WW or DXK from a QRZ XML lookup. The call sign shows up but not the name or other info. Thanks 73 Kent N6WT

+ AA6YQ comments below Dave have you had a chance to see the Geochron 4K video world map? I wonder if there would be anyway to plot QSO info or maybe SC data from DXLabs on that map. Wouldn't that be

+ AA6YQ comments below Recently had to send my K3 in for repair- so have had to put my kx3 into service as main shack radio for 2-3 weeks. Using it with a SignalinkUSB and all is working fine with

Dave have you had a chance to see the Geochron 4K video world map? I wonder if there would be anyway to plot QSO info or maybe SC data from DXLabs on that map. Wouldn’t that be cool. Julio, W4HY

+ AA6YQ comments below I've seen this as well and have wondered if I had WinWarbler mis-configured. I'm sure I've missed something. I just performed Dave's suggested procedure and do not have AZ

I've seen this as well and have wondered if I had WinWarbler mis-configured. I'm sure I've missed something. I just performed Dave's suggested procedure and do not have AZ in the QSO info pane

Recently had to send my K3 in for repair- so have had to put my kx3 into service as main shack radio for 2-3 weeks. Using it with a SignalinkUSB and all is working fine with WSJTX and FT8. But

Unless DXView is running and WinWarbler is communicating with it -- as indicated by the presence of DXV between the square brackets in WinWarbler's Main window -- the azimuth in WinWarbler's "QSO

OK I will use the clear function because yesterday I ended up populating incorrect state and county information into my DXKeeper log. Mark N1UK

It says CC   DXK   DXV  SC Although yesterday I wasn't running the DXV or SC Mark N1UK

+ AA6YQ comments below I notice also that the WinWarbler log window is keeping the old State and County information. If I change the callsign to say AA9L and press enter, the log window is showing

+ AA6YQ comments below Winwarbler log display is showing Path as S but to be sure I went to Win Warbler > Config > Log > Path is set to S. Winwarbler still doesn't show an AZ value. I see that