My RTTY is working fine with WinWarbler, but all of a sudden PSK is not. When I go to PSK the transmitter keys, but no audio is generated. The PSK settings are per the DXLab Wiki. Like I said, it

>>>AA6YQ comments below

>>>AA6YQ comments below

-----Original Message----- Sent: Monday, July 24, 2017 5:23 AM To: dxlab@... Subject: [dxlab] VS: Question Why does this not stop? I am also not able to update Dxkeeper.exe in Dxlab

Dear Joe Thank you very much. Never ever had a faster response in any support system I invoked. Faster then an ambulance. !!!! Regards Dr.Ghassan

Yes. Yes, enter YYYY-MM-DD in the filter textbox and click on the "Since" button. This is even easier after the first use of the "Since" filter as a Control-click on the "Since" button will filter

Why does what not stop? On your DXKeeper question, what did you do, what did you expect to happen, what actually happened? -- 73, Rich - W3ZJ www.w3zj.com

Dear Dave, Dear All, My present query is about DXKeeper and the possibility of incremental updating // vs. LOTW. Description: I have 2 QTHs few miles away

Hi Dave, does that mean we should be looking back through our logs to assign sub-modes correctly to achieve matches with the augmented eQSL records or will differences be offered as warnings like

Fra: Jan Langerud [mailto:ja-lan@...] Sendt: 12. juli 2017 14:35 Til: dxlab-subscribe@... Emne: VS: Question Fra: Jan Langerud [mailto:ja-lan@...] Sendt: 12. juli

When you invoke DXKeeper’s “Sync eQSL.cc QSLs” function, the “Inbox” returned by eQSL now specifies both MODE and SUBMODE for each QSO whose MODE includes one or more SUBMODEs in the ADIF

Thanks for your continuing interest, Dave. No scope here so I can't follow your suggestion.

>>>AA6YQ comments below

Antonio, Have tried both 4800 and 9600 with both 1 and 2 stop bits. None of these combinations work. Thanks for the suggestion.

Thanks, Dave. All of your setting suggestions are what I have been using. The serial cable is not the null modem type. There are no bent pins. The dual serial port is old. The manufacturer was

Anthony W.DePrato WA4JQS since 1962 CQ DX HALL OF FAME # 35 DXCC HONOR ROLL DXPEDITION OF THE YEAR 1992 VP8SSI DXPEDITION OF THE YEAR 1993/1994 3Y0PI VP8SSI 3Y0PI VP8BZL V31SS ZD8JQS WA4JQS/ZS1

Make sure - Commander's interrogation is enabled, with an interval of 200 ms - the serial port's RTS is set to "ON" - the radio and Commander are set to the same baud rate - you're using the

I would unplug both from the PC, watching device driver, then plug the 850 in to see what port it shows up on DD.

Thanks, Bob. Just did check the port number assignments and Device Manager tells me that this dual serial port card (now ASIX MCS9835) is assigned as ports 2 and 3. In Device Manager, set the

May be that Windows 10 assigned a different COM port number than 2. I have a USB to COM port adapter and when I installed a new driver the ports changed. So might want to check that. 73, Bob