Commander only knows the frequencies of the current primary transceiver and the transceiver connected to the secondary CAT port (if any). 73, Dave, AA6YQ

If you log QSOs in N1MM, export them at the end of the contest, and then import them into DXKeeper, you can configure the import operation to report anything needed that is worked or confirmed by the

If I'm following what you're saying, I was able to see how many DXCC/Zones I worked during CQWW right from N1MM. Perhaps your contest logging program could also provide that information? Scott KN3A

When the bands are hot with a lot of DX, I will setup 2 rigs – for exampleone on 10m and one on 15m. Commander supports the So2r Microham protocol and the 2 rigs are setup tofollow the commander

Seems a MUCH easier way is to make an image of the disk you are replacing with an image backup program , installing the new disk, restoring the image. you avoid the windows and application reinstalls

Hi, Just wondering if there's a simple way to see if anything needed was worked during a contest. What I did was create a custom date filter QSO_Begin BETWEEN #2013-10-26 00:00# and #2013-10-27

Yes, it had been installed and configured correctly and has been behaving flawlessly since a week after I made the plunge to DXLS. I left the shack to make lunch for my wife and me, and when I got

I had the same thing happen. No N1MM at the time although I do havebridge/N1MM on the box. 73/jeff/ac0c www.ac0c.com alpha-charlie-zero-charlie From: Dave AA6YQ Sent: Sunday, October 27, 2013

-----Original Message----- Sent: Sunday, October 27, 2013 8:36 PM To: dxlab@... Subject: [dxlab] Import Query Like a whole bunch of others I just finished a few hours in CQWW. I used the

From: dxlab@... [mailto:dxlab@...] On Behalf Of Jack Berry Sent: Sunday, October 27, 2013 5:29 PM To: dxlab@... Subject: Re: [dxlab] Operator field problem I saw

Firstly, I have been using the dxlabs software suite for a couple months now and have really enjoyed all the abilities it has to offer. I joined this group about a week ago and everyone seems to be

I replaced my HD with a 240 GB Samsung SSD several months ago. I had a problem with the cloning program that came with it so I used Acronis to clone the old drive. I had no problems doing it and

Like a whole bunch of others I just finished a few hours in CQWW. I used the new N3FJP Contest log. I liked it! Here is my question. I have not imported any logs into DXK in a long time. First of

What you are trying to do is essentially the same as moving between systems except that you will be maintaining the same directory location. See:

My heartfelt thanks to both Iain and to you, Dave. WA2DFP Steve

hello, I am in the process to substitute the system hard disk (C:\) with an SSD. So the operating system will be fully reinstalled and so will be all applications, including the DXLab Suite.

I saw the same today but no bridge, not running n1mm. I have latest versions running.

Hi, Just started getting this in DX Keeper with Bridge activated. I'd been operating the contest all weekend but this just started up: "upload qso to club log unknown column 'operator' in 'field

Hi Dave this was the hint, it works fine 73 Alex ---In dxlab@..., <dxlab@...> wrote: -----Original Message----- From: dxlab@... [mailto:dxlab@...] On Behalf Of Joe Subich, W4TV Sent: Sunday,

From: dxlab@... [mailto:dxlab@...] On Behalf Of af5k@... Sent: Sunday, October 27, 2013 9:15 AM To: dxlab@... Subject: [dxlab] Thanks Thanks every one for