no, of course. I don't know (I'd have to look) if I have even only one entity worked on all bands 160-10. As I've said, I'm pursuing the mixed DXCC, and an option to see unworked entities, I mean

Typing error below: May 17 should have been March 17. From: dxlab@... [mailto:dxlab@...] On Behalf Of Tommy Alderman Sent: Friday, April 05, 2013 12:32 PM To:

Dave, I have just tried. Clicking on Plot in DXKeeper moves the radio button in the map from DXCC entities to Log and no red dots appear, the map remains empty. Again, what I want to see are

Oh, ok. I can imagine the code to decode random comments gives somewhat fuzzy results. I suppose that is credible in UA4 in early April, also the spot was busted anyway since the DX was on 28026 UP 3

<salvatore.besso@...> wrote: Have you worked all of those 277 entities on ALL bands 10 though 160? Any entity that you have not worked on ALL bands (that you are pursuing) is still considered

Iain, look again, I have checked only "Unworked", so there would be no more than 64 dots on the map. I'm pursuing mixed DXCC 160-10 and at today I have worked 277 entities, so I want to see the

Ok I have so far in DXK 855 QSO's All are uploded to LOTW, EQsl, etc . Now I do the sync buttons on LOTW with no errors. Now if i click on the button that says Up-Date from LOTW a box pops up asking

-----Original Message----- Sent: Friday, April 05, 2013 5:40 AM To: dxlab@... Subject: [dxlab] Re: SC split spot it. I've just seen another that could perhaps be better. 5W0M spotted

When you have a logged QSO whose address does not print correctly, please 1. create an email message that specifies the QSO's callsign, date, and time 2. place your log file in a zip archive 3.

-----Original Message----- Sent: Friday, April 05, 2013 12:02 PM To: dxlab@... Subject: [dxlab] Problem with DXKeeper using new version of tQSL The new version of tQSL has been working

If you employ DXKeeper's DXCC submission generator, the first thing you'll do is deselect LotW's "proposal" and then select the QSOs identified by DXKeeper. LotW's "proposal" is notoriously

-----Original Message----- Sent: Friday, April 05, 2013 7:32 AM To: Lista DXLab Subject: [dxlab] DXView world map question hello all, all DXLab apps running. I go to DXView and I click the World

-----Original Message----- Sent: Friday, April 05, 2013 5:09 AM To: Lista DXLab Subject: [dxlab] Another question about DXKeeper qsl management hello all, I have noticed the following behaviour when

<salvatore.besso@...> wrote: It's not very intuitive (IMO), but the (full) meaning of "Unconfirmed" is "unconfirmed on any band or mode that you are pursuing for DXCC"... so if you're pursuing

I have run a TS2000 with USB to Serial converter (usually through a hub) for several years. For me, port config: Port 6 <--- this will probably differ for you Baud 9600 Word 8

In message #118365 (May 17),a question was posed about keying a K3 with RTS/DTR in the com port used by ww for communications with the K3, Dave answered: ">>>There's not, John. However, you can

The new version of tQSL has been working fine for the last few days except for the last QSO I tried to upload. From DXKeeper's Log QSOs screen, I right clicked on an entry and chose "Upload to LotW".

Spot on, Joe. Thank you. -Kurt KR2C

Program error 8020 is most often associated with a defective driver for a Prolific based USB to serial adapter. Some Prolific drivers rise the interrupt for "character received" before the character

I had a situation where I needed to delete my com ports on my Win7 PC. I had the PC rediscover the ports without any problems. It seems that all the programs I've checked so far work properly. I'm