This happened once again and then I realized that eQSL uploads fail on the same QSO's as Clublog. Thus, I suspect that this is really an Internet connection failure which will happen from time to

+++ AA6YQ comments below

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of f6gcp Sent: Sunday, August 05, 2012 5:45 AM To: dxlab@... Subject: [dxlab] Winkey and

Hi Ian, thanks on information. I have checked running Winkey2 software, and it shows firmware 2.3. A <winkeycmd:> could be nice, for advanced settings (Up to now, I don't know what I can do with this

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Rich - W3ZJ Sent: Sunday, August 05, 2012 11:24 AM To: DXLab Subject: [dxlab] Clublog Two of my last

If Chkdisk can't correct the damage to DXKeeper 10.3.7, then the procedure below will get you a new DXKeeper1037.exe Unless there's some other explanation for the low-level damage to your files, you

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Chuck Chandler Sent: Sunday, August 05, 2012 4:33 PM To: dxlab@... Subject: [dxlab] Update

OK, as soon as the check disk finishes I'll do that! Thanks, Dave!! -- =================== Chuck Chandler chandlerusm@... =================== [Non-text portions of this message have been

I posted earlier that DXK 10.3.7 won't launch. I've done some more checking. First off, I've been away and had the radio PC off. I turned it on Saturday and ran N1MM Logger to play a bit in the

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Ken Bandy, KJ9B Sent: Sunday, August 05, 2012 12:03 PM To: dxlab@... Subject: [dxlab]

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of alanswinger Sent: Sunday, August 05, 2012 12:00 PM To: dxlab@... Subject: [dxlab] Re:

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Chuck Chandler Sent: Sunday, August 05, 2012 9:59 AM To: dxlab@... Subject: [dxlab]

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Bob Sent: Sunday, August 05, 2012 9:56 AM To: dxlab@... Subject: [dxlab] Re: Lotw Multiple

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of Paul Beringer Sent: Sunday, August 05, 2012 9:39 AM To: dxlab@... Subject: [dxlab] County

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of pa3c_aart Sent: Sunday, August 05, 2012 7:26 AM To: dxlab@... Subject: [dxlab]

Hi Pat, What version of WinKeyer do you have? There was a change between v2.2 and v2.3 that significantly helps with this situation. From http://k1el.tripod.com/files/Winkey23changes.pdf : "Hang

A recompute in DXKeeper will not affect existing spot database entries. If you want those to be updated, you will need to Recompute in SpotCollector too (Config -> Spot Database). Failing that, when

You might choose to hide a spot database entry for the special callsign for some reason... perhaps it's EME, a mis-spot (it's actually some other DX station, but the idiots keep repeating a bad spot),

Rich Not a problem as we are now on the same page... Peace Bob

OK, I took this comment: to mean that you were working stations with W1SLG and importing them to your KB1ZJU log. As I look at it again I guess all you were saying is that you have two station