Date   

Re: SC and IRC

Bob N3PPH <rsheskin@...>
 

Yes I do. I get it to start the process and then it gives up. This is the entire error from the SC window. Have they turned ident checking on maybe? I never had that running before.

Connected to irc.radiochat.org @ 9/11/2011 1652
*** Looking up your hostname
*** Checking Ident
*** Found your hostname
*** No ident response
Your client may not be compatible with this server.
Compatible clients are available at http://www.worldirc.org/index.php?page=software
ERROR :Closing Link: N3PPH by Newark.NJ.US.WorldIRC.Org (Registration Timeout)

73,
Bob N3PPH

From: dxlab@... [mailto:dxlab@...] On Behalf Of Rich - W3ZJ
Sent: Sunday, September 11, 2011 12:29 PM
To: dxlab@...
Subject: Re: [dxlab] SC and IRC


Not having any problem with that here. Do you have it Enabled, host
address set to "irc.radiochat.org", Channel set to CQDX, Robot set to
DXS and your username (usually your callsign) set correctly?

73, Rich - W3ZJ

Bob N3PPH wrote:
I have noticed that I no longer connect to irc with spot collector. I get
this message " Your client may not be compatible with this server". I don't
think it is related to urlmon as I have not had problems with LOTW. I used
an irc client to make sure I could connect otherwise and it does work as
expected that way.

73
Bob N3PPH


Re: SC and IRC

g4wjs
 

--- In dxlab@..., "Bob N3PPH" <rsheskin@...> wrote:

I have noticed that I no longer connect to irc with spot collector. I get
this message " Your client may not be compatible with this server". I don't
think it is related to urlmon as I have not had problems with LOTW. I used
an irc client to make sure I could connect otherwise and it does work as
expected that way.
I've always had that message but the client does eventually connect. In my case it is because my router cannot handle the IDENT packets that the IRC protocol uses to establish communication. Your router may have a setting to allow them, many routers do need this configuration option set for IRC. Either way the link should establish since the CQDX IRC server eventually retries without requiring an IDENT response.


73
Bob N3PPH
73
Bill
G4WJS


Re: SC and IRC

Richard B Drake
 

Not having any problem with that here. Do you have it Enabled, host address set to "irc.radiochat.org", Channel set to CQDX, Robot set to DXS and your username (usually your callsign) set correctly?

73, Rich - W3ZJ

Bob N3PPH wrote:

I have noticed that I no longer connect to irc with spot collector. I get
this message " Your client may not be compatible with this server". I don't
think it is related to urlmon as I have not had problems with LOTW. I used
an irc client to make sure I could connect otherwise and it does work as
expected that way.

73
Bob N3PPH


SC and IRC

Bob N3PPH <rsheskin@...>
 

I have noticed that I no longer connect to irc with spot collector. I get
this message " Your client may not be compatible with this server". I don't
think it is related to urlmon as I have not had problems with LOTW. I used
an irc client to make sure I could connect otherwise and it does work as
expected that way.

73
Bob N3PPH


Re: spot collector

Richard B Drake
 

For security reasons this reflector does not permit possibly malware
infected attachments. If you like you can send a copy directly to me
"rich (at) w3zj.com", Dave "aa6yq (at) ambersoft.com" and anyone else
who requests to see it.

73, Rich - W3ZJ

DAVID MILLER wrote:

I have been getting this as a display.

From: Rich - W3ZJ
Sent: Sunday, September 11, 2011 10:15 AM
To: dxlab@...
Subject: Re: [dxlab] spot collector


What kind of problems are you having? We need much more detail in order
to suggest a solution.

73, Rich - W3ZJ

DAVID MILLER wrote:

I have been having problems with spot collector display. Anyone know what I'm doing wrong?










------------------------------------

Yahoo! Groups Links






Re: spot collector

DAVID MILLER <davidbmiller@...>
 

I have been getting this as a display.

From: Rich - W3ZJ
Sent: Sunday, September 11, 2011 10:15 AM
To: dxlab@...
Subject: Re: [dxlab] spot collector


What kind of problems are you having? We need much more detail in order
to suggest a solution.

73, Rich - W3ZJ

DAVID MILLER wrote:
I have been having problems with spot collector display. Anyone know what I'm doing wrong?





[Non-text portions of this message have been removed]


Re: spot collector

Richard B Drake
 

What kind of problems are you having? We need much more detail in order to suggest a solution.

73, Rich - W3ZJ

DAVID MILLER wrote:

I have been having problems with spot collector display. Anyone know what I'm doing wrong?



spot collector

DAVID MILLER <davidbmiller@...>
 

I have been having problems with spot collector display. Anyone know what I'm doing wrong?


Re: DOK's and User-defined items

KU7Y <ku7y.cw@...>
 

Hi Jim,

I saw your post about SOTA and how you have set up some User defined fields and etc.

I'm just getting into some SOTA work and have no idea how to do this setup.

How are you finding it to use? And any help in getting it set up would sure be appreciated!

Thanks,

OK, back in my hole,

Ron, KU7Y
SOWP 5545M
Arizona Outlaws Contest Club
Brenda, AZ (Winter)
Caldwell, ID (Summer)
ku7y@...
http://www.hatpinsandmore.com


Re: Workspace

Richard B Drake
 

Peter Chamalian wrote:
I tried a workspace but it really wasn't that clear as to what it does, so I
deleted it (via the workspace window). After restarting launcher, that
deleted workspace shows up at the bottom.



a) What does workspace do and
A workspace is a file backup of all the DXLab registry settings which include your option settings and window positions etc. If you use different screen layouts or options for different situations you can create multiple Workspaces and activate them as needed.


b) How do I remove it so launcher doesn't see it any longer if I decide
I don't want it.
You can remove the Workspace file but doing so has no affect on the Windows registry. The last used settings remain in the registry and if they were removed your entire setup would be lost. So the answer is it can't be removed and there is absolutely no reason not to want it. If you don't use multiple Workspaces or never want to restore lost settings there is no need to worry about it.

73, Rich - W3ZJ


Workspace

Peter Chamalian <w1rm@...>
 

I tried a workspace but it really wasn't that clear as to what it does, so I
deleted it (via the workspace window). After restarting launcher, that
deleted workspace shows up at the bottom.



a) What does workspace do and

b) How do I remove it so launcher doesn't see it any longer if I decide
I don't want it.



Thanks,



Pete, W1RM


Re: SC filter doesn't filter audio

Chuck, WS1L
 

On Sat, Sep 10, 2011 at 10:51 PM, Dave AA6YQ <aa6yq@...> wrote:

**




On the Configuration window's Audio tab, the "Alarm trigger" panel lets
you choose between "Unfiltered" (announce newly-created entries that are
needed) and "Filtered" (announce announce newly-created entries that are
needed and that pass the Band, Mode, Continent, and Origin filters). There
is currently no way to limit announcements to newly-created entries that
pass an SQL filter.

OK, thanks, Dave!

73 de Chuck, WS1L


Re: mouse over question

Bill <w9ol@...>
 

understood.
not a problem

On 9/10/11 11:17 PM, Dave AA6YQ wrote:

AA6YQ comments below
-----Original Message-----
From: dxlab@... <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@... <mailto:dxlab%40yahoogroups.com>]On
Behalf Of
Bill
Sent: Saturday, September 10, 2011 6:13 PM
To: DXLabs List
Subject: [dxlab] mouse over question

I normally have SC on the secondary monitor.
As far as I can see, all the SC mouseovers appear on the 'Primary'
monitor and sometimes blend into the color of what I have positioned at
the upper left corner.

Is this correct or can I reposition the mouseovers?

That's a defect in the commercial control (TrueDBGrid Pro) used to
implement both SpotCollector's Spot Database Display and DXKeeper's
Log Page
Display.

Upgrades of this control have been available for years, but I have been
reluctant to try them for fear of leaping from the frying pan to the fire.

73,

Dave, AA6YQ

--
---------------------------
At least egotists don't talk about other people, too.
---------------------------
Bill H. in Chicagoland
Doing my best to annoy nearly everyone since 1945.
webcams at http://w9ol-towercam.webhop.org
weather at http://hhweather.webhop.org
live weathercam chat hhweather.chatango.com


Re: urlmon.dll & IE9 issue FIXED!!!!!!!!!

neil_zampella
 

My bad ...

On 09/11/11 06:52 am, Rich - W3ZJ wrote:
Yes, but the only thing that applies to Windows 7 in that article is the
link to the Install/Uninstall IE9 page which Dave has already referenced
in the Wiki topic. There is no download of IE8 available for Windows 7
and attempting to apply any of the other methods mentioned in that
article would only mess up your option settings and would not fix the
URLMON.dll problem.

73, Rich - W3ZJ

Neil Zampella wrote:
It gives download URLs re-installation sources for IE7, 8 & 9 ...
should have been clearer. The fixer may help .. haven't tried it though.

On 09/10/11 05:15 pm, Dave AA6YQ wrote:

Thanks, Neil, but I don't see how the information in this article would repair the "wrong URLMON" defect that Gary and Bob encountered. If I'm missing it, please explain.

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Neil Zampella
Sent: Saturday, September 10, 2011 8:35 AM
To: dxlab@...
Subject: Re: [dxlab] urlmon.dll & IE9 issue FIXED!!!!!!!!!


FWIW ... here's a great Microsoft knowledgebase article that will help,
it has a built-in fixer, or you can do it manually.

http://support.microsoft.com/kb/318378


------------------------------------

Yahoo! Groups Links





Re: urlmon.dll & IE9 issue FIXED!!!!!!!!!

Richard B Drake
 

Yes, but the only thing that applies to Windows 7 in that article is the link to the Install/Uninstall IE9 page which Dave has already referenced in the Wiki topic. There is no download of IE8 available for Windows 7 and attempting to apply any of the other methods mentioned in that article would only mess up your option settings and would not fix the URLMON.dll problem.

73, Rich - W3ZJ

Neil Zampella wrote:

It gives download URLs re-installation sources for IE7, 8 & 9 ...
should have been clearer. The fixer may help .. haven't tried it though.

On 09/10/11 05:15 pm, Dave AA6YQ wrote:

Thanks, Neil, but I don't see how the information in this article would repair the "wrong URLMON" defect that Gary and Bob encountered. If I'm missing it, please explain.
73,
Dave, AA6YQ
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Neil Zampella
Sent: Saturday, September 10, 2011 8:35 AM
To: dxlab@...
Subject: Re: [dxlab] urlmon.dll & IE9 issue FIXED!!!!!!!!!
FWIW ... here's a great Microsoft knowledgebase article that will help,
it has a built-in fixer, or you can do it manually.
http://support.microsoft.com/kb/318378


Re: mouse over question

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Bill
Sent: Saturday, September 10, 2011 6:13 PM
To: DXLabs List
Subject: [dxlab] mouse over question


I normally have SC on the secondary monitor.
As far as I can see, all the SC mouseovers appear on the 'Primary'
monitor and sometimes blend into the color of what I have positioned at
the upper left corner.

Is this correct or can I reposition the mouseovers?

That's a defect in the commercial control (TrueDBGrid Pro) used to
implement both SpotCollector's Spot Database Display and DXKeeper's Log Page
Display.

Upgrades of this control have been available for years, but I have been
reluctant to try them for fear of leaping from the frying pan to the fire.

73,

Dave, AA6YQ


Re: Spot Collector and PathFinder

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
iz4mjp
Sent: Saturday, September 10, 2011 4:05 PM
To: dxlab@...
Subject: [dxlab] Spot Collector and PathFinder


I've recently upgraded all the application in DX Lab after my return at
home.

Today i've noticed that when a double click on a spot entry in Spot
Collector, Commander QSY my FT-1000 and the Path Finder window automatically
brings up over the Spot Collector window showing the QRZ info of the spotted
callsign.

Before the update, double clicking oh the spot entry in SC, the Commander
made a QSY on my Radio but SC STAYS IN BACKGROUND

As i have a cluttered screen (22") i have tiled SC and PF one over another
and ONLY when i need to read the QRZ.com page of the spotted callsign, i
manually bring up the PF window in foreground.

Maybe i'm missing something (i've been far from my shack for 1 month) but i
didn't find any Preferences that avoid this. Only the use of the Mouse Right
Click + QSY avoid me this.

Is there any way "to restore" the previous behavior of PF?

Sometimes Pathfinder's captive web browser (Internet Explorer) decides to
grab focus after completing a search or a lookup. I have chased this down
many times over the years, but have never found a reliable way to replicate
it or control it. If you're going to have SpotCollector and Pathfinder share
the same screen space, make Pathfinder's window a little less tall so that
when Pathfinder petulantly appears atop SpotCollector, you can correct the
situation by simply clicking on the still-visible title bar of
SpotCollector's Main window.

73,

Dave, AA6YQ


Re: SC filter doesn't filter audio

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Chuck Chandler
Sent: Saturday, September 10, 2011 10:36 AM
To: dxlab@...
Subject: [dxlab] SC filter doesn't filter audio


After some experimenting and help from Dave, I have a filter button working
to give me a quick way to limit the SC display to needed entities spotted
from NA. The button calls:

(NAE='Y' or NAM='Y' or NAW='Y') and <bandfilter> and <modefilter> and
<needfilter>

What I see is just as I expect. What I hear, though, are audio
announcements for needed ones spotted from anywhere. Is there a separate
method of limiting the audio announcements, or have I missed a SQL step?

It's not a major issue, but if there's a fix I'd like to stop the spots of
needed ones spotted from outside NA unless I am displaying spots from
outside NA.

On the Configuration window's Audio tab, the "Alarm trigger" panel lets
you choose between "Unfiltered" (announce newly-created entries that are
needed) and "Filtered" (announce announce newly-created entries that are
needed and that pass the Band, Mode, Continent, and Origin filters). There
is currently no way to limit announcements to newly-created entries that
pass an SQL filter.

73,

Dave, AA6YQ


Re: QSLing List

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Laurent FERRACCI
Sent: Saturday, September 10, 2011 3:19 PM
To: dxlab@...
Subject: Re: [dxlab] QSLing List


Hi Dave

Is there a way to do such an export in a TDF, including all QSO partner's
fields ?

The items exported to a TDF file are listed here:
<http://www.dxlabsuite.com/dxkeeper/Help/Export.htm#Exporting a
tab-delimited file>

73,

Dave, AA6YQ


Re: PSK 31

Bill Duffy
 

Tnx Danny.....I think it's the latter.
73
Bill
KA0VXK

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of
DANNY DOUGLAS
Sent: Saturday, September 10, 2011 8:21 PM
To: dxlab@...
Subject: Re: [dxlab] PSK 31

Its possible you have clicked in two panes and on the waterfall for both of
them. Or more possible you have two panes (een three is possible) set on
separate signals on the waterfall, but one or two of those signals are
simply overdriven transmitters putting out sidebands of the same station. I
often see as many as half a dozen signals, whcih prove to the the same
station, above and below the real target. an be caused by either him
overdriving, or me running my af/rf knobs too high and overdirving the
receiver.

Danny Douglas
N7DC
ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB
All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU
CR9/7Y/KH7/5A/GW/GM/F
Pls QSL direct, buro, or LOTW preferred,
I Do not use, but as a courtesy do upload to eQSL for those who do.
Moderator
DXandTALK
http://groups.yahoo.com/group/DXandTalk
Digital_modes
http://groups.yahoo.com/group/digital_modes/?yguid=341090159

----- Original Message -----
From: Bill Duffy
To: dxlab@...
Sent: Saturday, September 10, 2011 9:05 PM
Subject: [dxlab] PSK 31



Greetings all:

In WW, from time to time, not always I will be copying the same QSO in 2
of
the 3 panes.
What do you think I have set incorrectly?

Or where should I start looking?

Tnx es 73

Bill

KA0VXK











------------------------------------

Yahoo! Groups Links

112961 - 112980 of 208808